I am thinking about switching back from Pc to the Mac; however I have a Dell 256 SSD P800 made by Samsung and was wondering if it was possible to swap the drive in the current MBP 13" with the 256 Samsung SSD? Would I need to install drivers or would it be as easy as installing the drive in the MBP and running the Snow Leopard disk?
View 6 Replies
I have a late-2010 Macbook Pro 15" and have been having issues with gaming. Specifically, the games will freeze the system requiring a reboot. After reading further, I learned about the "Automatic Graphics Switching" mode under "Energy Saver" in the System Preferences screen. Upon disabling this setting, and locking the preferences, the games are still freezing.
I have not re-enabled this setting but when I check the settings again it is enabled. Seemingly, the OS is changing the "Automatic Graphics Switching" on its own.
Info:
MacBook Pro, Mac OS X (10.7.4)
Why do i keep switching back to finder
View 3 Replies View RelatedJust purchased a new iMac that came with a wireless keyboard. When I am working on accounting documents, I wish to use a numeric keyboard. The apple numeric keyboard I purchased does not seem to always work when I turn on my computer. It seems to only want to pick up the bluetooth keyboard. I have tried disconnecting the bluetooth keyboard but then it says "no keyboard found" even though I have the numeric keyboard plugged into the USB.
Info:
iMac, iOS 7.1.2
i finally got my High Res Glossy MBP after 4 weeks of waiting...Everything works fine...and NO yellow tint issue...The only problem is 1 small dead pixel towards the bottom right of the screen...Will apple do an exchange on CTO machines with only 1 dead pixel?Is it even worth doing the exchange? After reading these forums i see that a lot of other users have been complaining about all types of problems...Yellow tint, wifi problems, over heating...etcshould I consider myself lucky? And just be happy that its only 1 small pixel?
View 24 Replies View RelatedI currently have a Core Duo (black) Macbook and i very recently upgraded the hard drive to a new Hitachi Travelstar 7k320.
View 7 Replies View RelatedMy logic board broke on my 07 mbp and i decided to buy a new 15" i7 anti glare 7200rpm. My question is how should i go about getting my files onto my new computer. I have a time machine backup, will it let me just install that onto my new computer? If so, do I want to do this or will that cause problems since its a different machine.
View 2 Replies View RelatedSo for awhile I was following all of the to do about the GPU switching. Eventually I figured I would just deal with it and check back a month or so down the road. So since I've been out of the loop I was wondering if anybody can update me?
I've been using gfxcardstatus and it is very useful but would love to apple to just give us an update.
I am unable to switch on my macbook.tried few times but dont know why.
Info:Mac Pro, Mac OS 9.0.x
Bought a refurbed Macbook but it is running OSX 10.4.11 want to update it as none of my other toys sink up to it iPod, iPhone etc What is needed to update it. These are my specs.
Model Name: MacBook Model Identifier: MacBook2,1 Processor Name:Intel Core 2 Duo Processor Speed: 2.16 GHz Number Of Processors:1 Total Number Of Cores:2 L2 Cache (per processor):4 MB Memory:1 GB Bus Speed:667 MHz Boot ROM Version: MB21.00A5.B07 SMC Version:1.17f0 Serial Number:W8******YA4 Sudden Motion Sensor: State: Enabled
Info:
MacBook, Mac OS X (10.4.11)
Is it possible to switch RAM between two Macbooks? One is 2GB and the other is 4GB. They are both the same model (Macbook, 2008 1st generation unibody)
View 3 Replies View Relatedi bought the 2.26 ghz version, not totally impressed with the speed. will switching to 4gb make like a good difference in the speed?
View 13 Replies View RelatedOne second my battery level will say 4:** remaining and the a minute or so later it will say 5:** remaining and then it will go back up to 7:**. This happens even when its fully charged or plugged in. What do you think it is? normal? Does your new MBP do the same thing?
View 1 Replies View RelatedI decided to try gfxCardStatus from a previous post to get a handle on which card is in use because I really feel like my battery usage is lacking, maybe 3 hours of continuous blogging and word processing. Nothing intensive like video. It showed the dedicated NVidia card. I switched to the Intel and no matter what I tried, I couldn't trigger the GT 330M. Video, every app, many windows. Appears to be a bug to me.
View 7 Replies View RelatedI also tried installing Windows to see if the 9600 would show up there, but I get a blank screen when booting the XP CD. I get the same blank screen when trying a Linux CD. Is this perhaps because the MBP is trying to use the 9600 but it's borked and not displaying anything.
View 8 Replies View RelatedI was looking through tech specs of the 15 and 17 inch macbook pros and comparing them to iMacs, so i was wondering why they did that? Is the graphics better on the macbook pro?
Info:
MacBook Pro, Mac OS X (10.7.3)
Is there an app or some process to easily switch between OS X and Win7 on my MacBook Pro?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4), Also have Win7 loaded
The title is pretty simple, and self explanatory. Will the HD Graphics/330M combo, or the 9400M/9600M GT ever be able to switch back and forth in Windows? And regardless of if it's possible, what is the limitation, drivers, other software, or a physical hardware limitation? It would be a nice way to get more battery life out of Bootcamp.
View 12 Replies View RelatedI have an SSD in place of the usual hard disk my MBP 13" came with to which i placed in the optibay. Since i did this (yesterday) ive noticed how noisy the drive is over just using the SSD alone.
Is there a way to either powerdown the optibay drive or 'eject' it when not in use for silence and prolonged battery life? Would you recommend it? Most of the time i will just use it as a netbook unless i download media to the optibay.
i have a White Macbook Core 2 Duo 2.16 and my friend has a Black macbook Core 2 Duo 2.0 so the top row of keys are different.. can we switch out the keys, if so, how?
View 8 Replies View RelatedSo i want to switch my 500gb external hard drive and the generic factory 80gb hard drive in my laptop, but i already have alot of stuff on the external, if i cloned my mac onto the external and switched would i be able to access the files on previously external hard drive via my computer?
View 9 Replies View RelatedOk, here's my big question, will the GPU switching in the refresh MBPs perform the same in bootcamp? I'm thinking of running simple window stuff at most times which clearly won't need the 330 and then games every now and then which will. I'm thinking of still converting over in about 2-3 weeks when I get to Ohio.
View 1 Replies View RelatedFor the last week I noticed that when I enlarge any video stream to full screen, the lips do not sync with the audio. I tried disabling automatic switching of the video card and everything is normal when I enlarge the video.
View 2 Replies View RelatedI have a MacBook Pro 15" 2.66 GHz Intel Core i7 (Mid-2010). I have auto graphics switching turned on in the Energy Saver prefs. But it never switches. It stays on the nVidia card all the time.
I have tried switching to Text Edit, Mail, BBEdit, and other non-graphics intensive apps. It stays on nVidia. It stays on nVidia even when I unplug and use battery power.
I can manually change it to Intel, and it works fine. When I change it back to auto switching, it stays on nVidia continuously.
Info:
MacBook Pro 15, Mac OS X (10.6.7), 2.66 GHz Intel Core i7 (Mid 2010)
I have a 13" Macbook Pro (Late 2011). I am looking at switching to Dvorak layout, but it would be easier if my keys matched what I was typing. Is there a way I could get the tiles replaced to follow the pattern of a Dvorak keyboard instead of QWERTY?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I'm trying to switch from english to greek pressing alt-cmd (which worked so far), but for some reason it doesn't work. What has gone wrong? Have I pressed something on the keyboard that has probably locked that change? I'm desperate to have an answer as I need it as soon as possible.
Info:
MacBook Pro, Mac OS X (10.7.3)
I've noticed this twice now, when I shut down my machine I always make sure its fully powered down, I then close the lid, now normally I let the macbook charge overnight, but the system on both occasions was fully charged, so I switched off the mains supply went to sleep and in the morning switched the plug on and picked up the mbp to check my emails, now the lid was down when I picked the system up but all of the sudden the apple logo lit up and the chime sound started and the system started up, the only issue is that when you open the lid you can see the logon screen but it's to dark to see anything but I can see outlines that indicate the system is at the logon screen. I'm a tad concerned that there might be a short on the casing to the power button, but it's odd that it only does it when I suddenly power up via the mains and not when on battery power? It's an Early 2011 MBP 13" intel i5 2.3Ghz 8GB corsair RAM 120GB corsair SSD.
Info:
MacBook Pro, Mac OS X (10.7.3)
i have 2 macbook pros , and i want to switch everything between those 2 macs, i want the mac1 to be on mac2 and vice versa how can i do this the fastest way possible ?
Info:
MacBook Pro, Mac OS X (10.7.4)
MPBr, 15", Early 2013 with dual graphics (Intel HD Graphics and AMD Radeon)
Running Maverics 10.9.3
What is happening:
1. Machine doesn't switch to AMD graphics no matter whatever app is running. In activity monitor even if some apps say "Requires High Perf GPU", the graphics card being used is still "Integrated".
2. Connecting to an external display via thunderbolt or HDMI doesn't work (external display doesn't turn on) either as it required discrete graphics too.
3. After a reboot (at what time I believe machine tries to use discrete graphics card), the display is always blank. Even the Apple logo on back of lid is turned off. Only way to get the display back is to close the lid and open it after 10 ~ 15 seconds at which time it probably switch back to integrated and comes alive.
What I have tried:
1. Reset PRAM.
2. Reset SMC.
3. Tried gfxCardStatus [URL] to no avail. If I manually switch to discrete card, gfxCardStatus checkmark say it has switched, but it doesn't.
4. Tried booting into hardware diagnosis (pressing D while booting) but was unable to get the screen turned on to proceed.
So I did the EFI firmware update and now my dynamic switching is broken. I cannot watch any video on the internet in fullscreen that has a 480p or lower resolution. Whenever I switch to fullscreen, the video becomes extremely choppy. This, of course, happens because the graphics card does not switch from Intel to nVidia. I'm on a 17'' Core i7 Macbook Pro.
View 2 Replies View Related
