MacBook Pro :: Switching Between OS X And Win7 On It?
May 17, 2012Is there an app or some process to easily switch between OS X and Win7 on my MacBook Pro?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4), Also have Win7 loaded
Is there an app or some process to easily switch between OS X and Win7 on my MacBook Pro?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4), Also have Win7 loaded
I currently have a Core Duo (black) Macbook and i very recently upgraded the hard drive to a new Hitachi Travelstar 7k320.
View 7 Replies View RelatedMy logic board broke on my 07 mbp and i decided to buy a new 15" i7 anti glare 7200rpm. My question is how should i go about getting my files onto my new computer. I have a time machine backup, will it let me just install that onto my new computer? If so, do I want to do this or will that cause problems since its a different machine.
View 2 Replies View RelatedSo for awhile I was following all of the to do about the GPU switching. Eventually I figured I would just deal with it and check back a month or so down the road. So since I've been out of the loop I was wondering if anybody can update me?
I've been using gfxcardstatus and it is very useful but would love to apple to just give us an update.
I am unable to switch on my macbook.tried few times but dont know why.
Info:Mac Pro, Mac OS 9.0.x
Bought a refurbed Macbook but it is running OSX 10.4.11 want to update it as none of my other toys sink up to it iPod, iPhone etc What is needed to update it. These are my specs.
Model Name: MacBook Model Identifier: MacBook2,1 Processor Name:Intel Core 2 Duo Processor Speed: 2.16 GHz Number Of Processors:1 Total Number Of Cores:2 L2 Cache (per processor):4 MB Memory:1 GB Bus Speed:667 MHz Boot ROM Version: MB21.00A5.B07 SMC Version:1.17f0 Serial Number:W8******YA4 Sudden Motion Sensor: State: Enabled
Info:
MacBook, Mac OS X (10.4.11)
I have updated all software. Boot Camp Assistant shows as 3.0.1.(313). What can I do?
View 3 Replies View RelatedI've recently bought a used macbook air 2010 model and i've been trying to bootcamp windows 7 onto it. as you know the air doesn't have an optical drive so i have a windows 7 iso mounted on a usb drive.
note that this is my first time using osx.
the steps i've taken so far are as follows:
-Run Boot Camp Assistant
-Downloaded latest Windows support software onto a separate usb stick.
-Set up the desired partitions
The windows 7 usb drive is plugged in and when i click "install", it says the installer cannot be found. I've searched online for solutions but none succeeded.
Info:MacBook Air, Mac OS X (10.7.4)
Is it possible to switch RAM between two Macbooks? One is 2GB and the other is 4GB. They are both the same model (Macbook, 2008 1st generation unibody)
View 3 Replies View Relatedi bought the 2.26 ghz version, not totally impressed with the speed. will switching to 4gb make like a good difference in the speed?
View 13 Replies View RelatedOne second my battery level will say 4:** remaining and the a minute or so later it will say 5:** remaining and then it will go back up to 7:**. This happens even when its fully charged or plugged in. What do you think it is? normal? Does your new MBP do the same thing?
View 1 Replies View RelatedI decided to try gfxCardStatus from a previous post to get a handle on which card is in use because I really feel like my battery usage is lacking, maybe 3 hours of continuous blogging and word processing. Nothing intensive like video. It showed the dedicated NVidia card. I switched to the Intel and no matter what I tried, I couldn't trigger the GT 330M. Video, every app, many windows. Appears to be a bug to me.
View 7 Replies View RelatedI also tried installing Windows to see if the 9600 would show up there, but I get a blank screen when booting the XP CD. I get the same blank screen when trying a Linux CD. Is this perhaps because the MBP is trying to use the 9600 but it's borked and not displaying anything.
View 8 Replies View RelatedI am thinking about switching back from Pc to the Mac; however I have a Dell 256 SSD P800 made by Samsung and was wondering if it was possible to swap the drive in the current MBP 13" with the 256 Samsung SSD? Would I need to install drivers or would it be as easy as installing the drive in the MBP and running the Snow Leopard disk?
View 6 Replies View RelatedI was looking through tech specs of the 15 and 17 inch macbook pros and comparing them to iMacs, so i was wondering why they did that? Is the graphics better on the macbook pro?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have an unibody MacBook I'm wondering if it is possible to use the same color profile that I have on Snow Leopard when I boot into win 7? (the current default color profile on win 7 is terrible!)
View 1 Replies View RelatedI will be getting a macbook pro 13" and I want to do a little gaming, call of duty and a few other games. Would I get better performance with bootcamp in xp or Windows 7
View 4 Replies View RelatedI just got a 2.26 Ghz macbook pro 13" and I want to do a little light gaming so I am wondering what bootcamp to run.. Should I run XP or Windows 7. What will have better performance and will directx10 be that big of a difference on games COD MW2?
View 5 Replies View RelatedStandard bootcamp drivers are quite old so I went to upgrade the drivers from nVidia.com; I noticed that nVidia doesn't support the 330M under its driver page, am I to assume the 330M is an Apple specific part? Will nVidia support the 330M in an upcoming release?
View 1 Replies View RelatedI'm having trouble updating from bootcamp 3.0 to 3.1 in windows 7 PRO 32-bit. Both windows OS and MAC OS X are fully updated. I've tried running the apple software update program and I don't get any error messages, it tells me to restart and after the restart Bootcamp is still 3.0. I've tried downloading the file and running the file. But when I go to run the file nothing happens! I've tried to re-download the file again but still no luck.
View 1 Replies View RelatedRecently got my first MBP and I love it, however felt the need to instal Windows 7 x64 to play games. There is one problem though, after trying everything and looking everywhere, or so I think, I have yet to get the built in Mic to work under windows 7 x64 to use it with skype or teamspeak.
View 1 Replies View RelatedThe title is pretty simple, and self explanatory. Will the HD Graphics/330M combo, or the 9400M/9600M GT ever be able to switch back and forth in Windows? And regardless of if it's possible, what is the limitation, drivers, other software, or a physical hardware limitation? It would be a nice way to get more battery life out of Bootcamp.
View 12 Replies View RelatedI have an SSD in place of the usual hard disk my MBP 13" came with to which i placed in the optibay. Since i did this (yesterday) ive noticed how noisy the drive is over just using the SSD alone.
Is there a way to either powerdown the optibay drive or 'eject' it when not in use for silence and prolonged battery life? Would you recommend it? Most of the time i will just use it as a netbook unless i download media to the optibay.
i have a White Macbook Core 2 Duo 2.16 and my friend has a Black macbook Core 2 Duo 2.0 so the top row of keys are different.. can we switch out the keys, if so, how?
View 8 Replies View RelatedSo i want to switch my 500gb external hard drive and the generic factory 80gb hard drive in my laptop, but i already have alot of stuff on the external, if i cloned my mac onto the external and switched would i be able to access the files on previously external hard drive via my computer?
View 9 Replies View RelatedOk, here's my big question, will the GPU switching in the refresh MBPs perform the same in bootcamp? I'm thinking of running simple window stuff at most times which clearly won't need the 330 and then games every now and then which will. I'm thinking of still converting over in about 2-3 weeks when I get to Ohio.
View 1 Replies View RelatedFor the last week I noticed that when I enlarge any video stream to full screen, the lips do not sync with the audio. I tried disabling automatic switching of the video card and everything is normal when I enlarge the video.
View 2 Replies View RelatedI have a MacBook Pro 15" 2.66 GHz Intel Core i7 (Mid-2010). I have auto graphics switching turned on in the Energy Saver prefs. But it never switches. It stays on the nVidia card all the time.
I have tried switching to Text Edit, Mail, BBEdit, and other non-graphics intensive apps. It stays on nVidia. It stays on nVidia even when I unplug and use battery power.
I can manually change it to Intel, and it works fine. When I change it back to auto switching, it stays on nVidia continuously.
Info:
MacBook Pro 15, Mac OS X (10.6.7), 2.66 GHz Intel Core i7 (Mid 2010)
I have a 13" Macbook Pro (Late 2011). I am looking at switching to Dvorak layout, but it would be easier if my keys matched what I was typing. Is there a way I could get the tiles replaced to follow the pattern of a Dvorak keyboard instead of QWERTY?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I'm trying to switch from english to greek pressing alt-cmd (which worked so far), but for some reason it doesn't work. What has gone wrong? Have I pressed something on the keyboard that has probably locked that change? I'm desperate to have an answer as I need it as soon as possible.
Info:
MacBook Pro, Mac OS X (10.7.3)