I have a Dell UP2414Q connected via HDMI to my late 2013 15" retina MBP. The built in display is off (clamshell mode).
Sometimes, the display randomly blanks and the monitor reports no signal. This occurs continuosly for a few minutes and then the display goes back to normal. Sometimes I have to plug in/plug out the monitor to make it recover. /var/log/system.log shows no logs while these blinks occur.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
My macbook pro retina 2013 with ssd is very noisy and hot, while battery charging? What am i doing wrong? What additional information i need to provide?
I'm having difficulties connecting my late-2013 retina display Macbook Pro to my Viewsonic PJD5223 projector. I have a (working) HDMI to VGA adaptor as well as an HDMI to mini-displayport/thunderbolt adaptor, and I have tried using two methods to connect:
1. Using he HDMI port directly
2. Using the thunderbolt port through the HDMI/thunderbolt adaptor on the Macbook Pro
Neither method appear to working. My Macbook Pro screen begins to blink/flicker, as if connecting then disconnecting rapidly. During the quick flashes, sometimes I can catch a glimpse of successful connection to the projector because the display settings panel for multiple screens appears.
I know that my adaptors are working because I can connect my Macbook Pro to my HP monitor with either of the two methods. I can also connect my PC to the projector using the HDMI/VGA adaptor. The problem appears to be specific to the retina display Macbook Pro or a more recent software update because I can connect to the projector using an older 2008 non-retina Macbook Pro.
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.4)
Is 55-60 degree centigrade normal temperature of cpu in idle state ? I'm using 2.4 GHz i7 macbook pro retina early 2013. Two days back i gave my macbook for screen replacement after that i feel my macbook is getting overheated!
My mid-2014 15" Macbook Pro randomly "loses" its retina display at the top menu (becomes pixel-y), where the battery, sound, and wifi logos are (on the top right side of the screen). A restart fixes the issue, but I want to know if this is an issue that can be fixed?
I had reinstalled the OSX on my MBP a few times so I am not unfamiliar with the process of rebooting from the boot menu, formatting via the disk utility and then reinstalling either via a backup or from the internet backup (as the retina does not have a dvd drive). Doing it this time and I did nothing different, however upon entering the disk utility screen, the main disk image simply wasn't there. I was conducting a reinstall of OSX from the internet and had already downloaded the new software, as you have to do when installing from the internet.
I then came to the disk utility screen, ready to reformat the hard drive and it simply wasn't there at all. The only image there was the one I had just downloaded ready to install. Thinking this extremely strange, I reboot the computer and it takes ages, then comes to a screen with a continually flashing folder symbol with a question mark in it. I have left it like this for 30 mins with no change. So now, I cannot boot normally, and I cannot reinstall a downloaded image on the main SSD because it is not showing at all in the disk utility. I have plugged in an external hard drive and am currently installing a new image on this to try to check where the main hard drive is once it is up and running. As mentioned, it is an early 2013 MBP retina, the warranty is up so cannot take it back to apple.
I've connected my 30" Dell 3007WFP display to my Macbook Pro 15" Retina laptop with Apple's adapter for Thunderbolt to DVI-D Dual Link. The display is only receiving Single Link instead of Dual Link, limiting the resolution to 1280x800 instead of 2560x1600.
Has anyone else seen this problem? On the forums at macrumors.com, a few other people have reported this issue. One person there has reported that his adaptor (same model as I have) provided this display with Dual Link when connected to a Macbook Air but not when connected to the MBP Retina. If that's true, then it sounds like there's a defect in the MBP Retina. At the least, should I return the adapter until Apple makes some kind of a statement about whether this can be fixed?
This is my first MBP. I tried to connect it to my receiver with HDMI cable, and nothing happened. When I connect it to my windows computer it works flawsley. I'm not really sure if there is something I need to do. All I did was plug it in.
I have an LG W2442 24" external monitor that is capable of a resolution of 1920x1200. It is connected to my Macbook Pro with Retina using an HDMI cable and I am running Windows 7 & using Bootcamp. The laptop only recognizes a possible choice of 1920x1080 resolution instead of 1920x1200. How do I make it output the proper resolution?
So after spending the last few hours trying to understand what is going on with the new HP EVNY 23inch monitor I just purchased to work as an extended desktop with my MBP and finding a number of other discussions relating to the topic where by the non mac external monitors have a very poor display due to the way OSX outputs the colour through HDMI. as seen here: MBP Retina: Poor image quality from hdmi output
Now I'm just wondering, before I return the monitor should I try a thunderbolt to HDMI connector and connect to the HP external display that way? I've tried searching on this topic with no luck so I justhad to ask the question because I actually really do like the screen.
When I plug in my TV to the new HDMI out port on the MBP +Retina, the screen turns blue (like it used to on my Mac Air), the resolution changes, but then when the sceen comes back I am at the login screen. Not only am I logged out, but all my apps that were open were crashed (not quit).
Info: MacBook Pro (Retina, Mid 2012), Mac OS X (10.7.4), 8GB RAM, 256GB SSD base model
I'm using the macbook pro 2012 retina. The HDMI out to an external monitor works stopped working recently and only works if I'm connected when rebooting. This might have happened after a software update.
Info: MacBook Pro (Retina, Mid 2012), Mac OS X (10.7.4)
While watching today apple keynote. At the and i realized that my retina display is totally black. Mirror display through hdmi is ok, apple logo on back side of disply is not lighting.
I'm looking for a new monitor to go with my MBP, and I'm stuck trying to choose between the ones listed above.
The 2407WFP is a couple of years old now I guess, but it's the rev A04 version, which supposedly fixed the (few) problems with what was otherwise meant to be a great screen. It's an sPVA screen.
I've heard good reviews of the G2410, with its LED backlighting. It's still a TN panel and I hear so much bad stuff about them.
The 2209WA is an eIPS panel which I like the sound of, but it's smaller and lower resolution.
The F2380 is a cPVA panel, the image quality looks better but I've heard bad things about blacks on this panel.
How do software that aren't retina compatible yet look on the MBP Retina Display? From my own experience as a developer when using regular sized images and resolutions on the iPhone 4, they come out as blurry. I was thinking perhaps the same thing will occur if the software isn't retina compatible? I e 2x in GUI size and scaled down?
I had decided to get a retina MacBook Pro earlier, but I have grown tired of never finding them in the stores. Now I am wondering if the non retina would be the best way to go.
I specifically want to find out how to change the font size for "fill in the blanks" information. They're usually huge and i just simply want to make them smaller.
As a complete aside, is there a keyboard shortcut for being on google chrome or safari, then immediately opening the window for "preview." I'm typing notes out on preview while listening to a video lecture on my web browser, usually chrome, and i'd like to switch back and forth.
I left my Mac charging over night. I had not turned it off but had put it on sleep before closing it. When I tried to use it this morning it did not turn on, only the fan started running and does not turn off. Checked battery levels on side and it does not have any lights on even though it was completely charged. The front bottom on light is off as well. When I reconnect the charger it does not light up. Tried to use shift cntrl option per but nothing happens. I did install Yosemite as my OS a few days ago.
Info: MacBook Pro (13-inch Mid 2012), iOS 8.1, yosemite
I have a macbook air with specs below, we don't usually shutdown (convenience sake) we just closed the lid etc...
we recently noticed that its sometimes restarts itself even when the lid is closed, I also noticed that sometimes the wakeup doesn't work. I have to long press the power button so it could boot itself.
I just bought Samsung UN46C7000WFXZA. I want to connect my macbook pro to the TV and i got all the cables that i need.
1- HDMI cable 2- Mini DisplayPort to HDMI Female Adapter. 3- this sit that include Audio Cable
[URL] I did connect everything my macbook pro very well to the TV using HDMI cable from the laptop to HDMI/DVI port in the TV. Also I connected the Audio cable from my Headphone port in my laptop to PC/DVI Audio IN in the TV. Yes I got the pic and everything is good but no sound at all. I tried everything and i searched the net but no luck or answer at all.
if i buy the mini display port to dvi adapter, could i use it with a dvi to hdmi cable for my monitor. This is because the dvi and vga ports are already taken up.
Mid-2013 MBA. Computer does not seem to sleep when the lid is closed. Battery drains completely. SMC update has been run. OSX 10.9.4. No peripherals attached, Bluetooth is off, network sharing is off. In Console I see at least three "Sleep failure" messages...they all begin with 0x00000000 but then have different codes. They are 0x21006c00, 0x1f006fc00, and 0x1f006500.
My macbook pro 2013 shows question mark folder instead of booting. I fix it by going in recovery mode.
Re-start immediately after fix works, but problem keep repeating. Also i noted system have become slow. I have tried verify disk and repair disk permission, used disk start-up application.
I was playing a trackpad button intensive game and everything was fine. I shut down my game, closed the computer, and went to bed.
The next day, I opened my MBA and the physical trackpad button doesn't seem to work properly. If I push it down, I feel the button engage, but unless I'm touching it in the lefthand corner, there is no response on the screen. I've enabled touch-to-click and I can still get the left side to work, but this is really annoying.
I can't see any warping in the surface of the trackpad and I don't own a Bluetooth mouse.
Info: MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.3)
