MacBook Pro :: 17" - Slightly Loose Headphone Socket?
Oct 1, 2009
I have a fairly recent 17" MBP and I've discovered today that the headphone socket is a bit looser than I'm used to. My usual headphones click in as usual, but very little effort is required to pull them out. I have recently been using a client's cable to hook my MBP up to their speakers, and I have a feeling that the 3.5mm jack (which was a fairly tight fit) has somehow worn the socket.
Is it possible that using a slightly 'fatter' jack can damage a socket like that? I'm a bit wary of people plugging their cables into my laptop now, as I don't want to exacerbate the problem! Anyone else experienced this?
I could answer this myself tomorrow morning by trying it out on my fianc�e's new MBA but it's in the bedroom and she's asleep. Chances are I'll forget by tomorrow so I figured I'd ask here.
My Unibody MacBook Pro (Rev A) can use the microphone in my iPhone headphones when they're plugged into the audio out port. The volume controls on the headphones also work. Is this also true for the audio out socket on the MBA?
If yes then it should be pretty easy to make a mono audio input source by hacking an old set of iPhone headphones. I'll probably just get some kind of USB audio in adapter but this could always be an option.
I was thinking, for the next generation MacBook Air, would you want a slightly thicker (thickest part is 0.9in, tinnest is ~0.35in) laptop with a built in Superdrive, more ports, etc, or would you perfer that Apple moves away from this with a thinner computer (0.1in thinnest, 0.6in thickest), but with same limited ports.
I would actually perfer thicker with a superdrive, since I want an air but I want it to be like a MacBook but thinner. What do you think? Btw, this is assuming the regular MacBook does not change in size, since that would sway peoples opinions.
i just got my macbook pro unibody, and first time i insert headphone in the jack the little piece of the head phone gets stuck in the jack. what should i do?
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I am recently having really slow connection speed to the internet (both through wifi and ethernet connections). I have been told that when I run a netstat report there are too many active internet connections, somewhere in the region of 100. How do I remove all of these connections as to speed up my connection to the internet?
Actually I find this drive slightly noisy, not too bad but you can definitely hear it spinning and clicking every so often. Anyone else experience this or should I be worried?
I noticed my Macbook White (late 2009 model) right speaker is slightly louder than the left one. I have checked the sound balance on my sound setting and its set to balance. Some things I have noticed when playing with the settings. When i shift the balance to the left, there's sound on the right when it's not supposed to. Then when I shift to the right, the left speaker is quiet. This problem seems to happened on older Macbooks - [URL].
My lid seems to overhang very VERY slightly over the left side of the case. I got some people in my family to look at it, and they honestly don't even notice it. The distance is the thickness of a piece of paper. So small it is barely noticeable when looked at, but you can feel a slight difference when you rub your finger over the edge. Should I be concerned about this? I would take pictures of it, but the Macro mode on my camera isn't good enough to properly show this issue. Go Figure... Will this affect hard shell cases? I've also learned something. People that are O.C.D. really have a hard time enjoying their Macs. Seems like we spend more time scrutinizing every square inch of our equipment that we actually spend enjoying it.
I just turned on my mid 2009 13in Macbook Pro and noticed my display seems about 4 'clicks' dimmer than before. Everything else works fine. Can LED screens dim over time? Could my LED driver somehow have caused the screen to dim? Can just the LED portion of my display be replaced?
I'm the owner of a Macbook Pro with 4 gig RAM and a 320gb harddrive. However, I have noticed that the hard drive space is decreasing slightly for seemingly no reason. Case in point, today it went from 197.66gb to 197.50 whilst I was watching TV and just before it went down further for no reason whatsoever.
Although its not a big deal it does arouse my curiosity and annoy me. Is it just virtual memory that will eventually come back or something more sinister? If it continues for a long time the space lost will eventually add up. Since I'm planning on soon buying an iMac these are the sorts of things I need to know.
I just got a MacBook Pro, and the button being part of the trackpads touch area is cusing me problems. Freuently when I go to click the button it moves the cursor slightly causing the click to be in the wrong place.
Is there a way to turn off the lower area of the trackpad or something? Can I replace it with a trackpad with a seperate button?
Hope you can help out here. Been having a few problems reading DVDs ( slightly funny sound when spinning then spits them out ) - although it would read some OK, such as System disk.I out in a DVD just now, and it pulled it in, but then nothing - no spinup at all.And now I can't eject it - tried the eject button, logging out and back in again, restarting while holding down the trackpad button.Nothing worksAny ideas?Macbook Pro 2.8
I've recently bought the stock 17" MBP and am loving it! However just a quick question to all those who have used it. I have noticed that when I pick it up, the bottom panel underneath sort of bends slightly when my fingers press against it. It feels like the alu is bending slightly only in certain places on the base. I may just be another paranoid mac freak but has anyone else found this? I had an old 15" MBP and didn't have any similar issues with that. Loving the computer tho, the screen is fantastic!
I have the rev. C Air, recently bought. It works fine but I have noticed that when I tilt the screen back almost all of the way that the front left side lifts slightly off the desk. I can see that the front left pad is not touching the desk. Is this an idiosyncrasy of the computer? Do others have the same symptom? Of course once I place my hands on the computer and start typing it's not really a problem, but I can certainly feel it click down to the desk or if I lift my hands off and slightly push down there is a space there. I think it is a weight issue, because once I pull the screen slightly towards me the space disappears as well as the issue.
Seems to be a pretty hot topic right now, personally I want to loose it since I never use it, and would far rather have an external DVD drive for ripping the odd movie than lugging an external HD everywhere so I can access all my photos.
Each and everytime I put my Macbook Air 11 to sleep, it loses internet connection and I have to go into the Wi-Fi panel to rejoin my home network. It's quite annoying because I like to close my MacBook and hide it in the television cabinet when it's not in use. The first time I encountered this problem was when I left the MBA for an hour to download some big files, only to open it back up and find the download had not moved at all since I closed it.
I just ordered my first mac a few days ago online, and seeing that almost everyone takes advantage of the suposed 10h battery of the 13', I wonder if it gets slower when you are using the battery.
my current notebook (compal FL90) is considerably (much) slower when it is not powered to the grid especially if I'm running photoshop for casual editing.
my screen on the macbook pro 13 inch model is very loose and it's been a month since i've purchased it is there any way that i can get the hinge fixed or replaced at an apple store?
I bought my Macbook Pro last september along with my Thunderbolt monitor.Everything was working until today (yes today was my first time bringing my Macbook Pro elsewhere) and when I moved it, the display shut off.then I realized that when I just move the Thunderbolt plug around it would turn on and off the display depending which side I would hold. would it be a problem with the Monitor cable? or a problem with the Macbook Pro itself? both are still under warranty, so I'm not worried, but it saves me the trouble of lugging either (especially the monitor) back to the Apple store.
I am trying to use Syncopation to sync my iTunes library between my iMac and two Macbooks. I have had success in the past, but haven't used the program for a while (yeah...lazy!). Now, whenever I go to run the sync, I get this:
Cannot read from socket. error 0
Any ideas?
It may well be unrelated to Syncopation.
I recall data socket errors being an old windows thing, usually due to viruses or malware. Obviously, that's not a problem I should be having on my iMac. I don't get the error running anything else.
Can it be done? Is there a second socket on the uni-processor Mac Pro model which will allow for the addition of a second processor to the board, to give a dual-processor machine? For instance, with the 3.33GHz Mac Pro -- could you add another identical 3.33GHz quad-core processor to a second socket?
I've been considering of getting as my next laptop a macbook air. Now they have flash storage and what I was wondering is the following: Is there a possibility that if the battery is completely used and there is no power, you will loose the information on your computer
It's sort of come to my attention there's a few of us who are having *experiences* with a loose cover/latch. I wouldn't call this an *issue* at all, (yet) or it could be a problem with us being too picky. Either way, I'd like to know.
