As of today (Thu June 21), my perception from Twitter is that many people who ordered their new Retina MacBook Pros on the annoucement day (Mon Jun 11) have received their shipments this week. Wondering if Apple has fully serviced the Jun 11 US orders and is moving on to June 12-14 orders yet? I ordered mine on the 13th through Apple Business.
Info:
iMac
So those who paid for expedited shipping, did you get your mac in the 2-3 day period?
View 15 Replies View RelatedDecided to post here because I am getting MBA for my family member. Is there a huge difference between 2-3 days shipping and standard shipping?
View 24 Replies View Related[URL]
We need a Rom! Lets flash this shitznizzle!
As a prospective 27" i7 iMac owner, I've been following the thread on the yellow tinge issues for awhile now. Hoping that Apple had addressed the issue, I finally took the plunge and ordered my system on 1/20 and just got my shipping notification yesterday.
As I wait for it to arrive, I wanted to share some thoughts that came to mind after I read this review of a Samsung LED television a few days ago:
Getting the LED white light to travel from the edges to behind the LCD panel requires an optical wave guide that twists the light 90 degrees. This is no easy feat to perfect and Samsung hasn't managed to completely nail it: screen uniformity wasn't perfect when viewing a full white screen test pattern. On rare occasions, when viewing content with white areas at the top or bottom edge or a blue sky, this non-uniformity gave the screen edge a schmutzy (dirty) appearance. If this is an issue for a large TV then it may also be a problem for the iMac's 27-inch display. This got me thinking about what a Gizmodo reader mentioned last week in this article:
I now am fairly certain that the yellowing of the display is a manufacturing defect involving the distance between a layer of material used to diffuse the LED backlight and the LCD panel. To show a perfectly even color, this light scattering panel has to be absolutely flat and free of any warping, kinking, or thickness defects. It is this layer that I believe is at fault, and causes the color to drift and give the perception of yellow stripes, fields, and corners.
This would be absolutely consistent with the reports of horizontal and vertical stripes (a vertical or horizontal kink) or corners (a bad tuck). I believe these defects may not appear in the factory. Rather, with the rough handling the monitors receive when shipped this layer gets knocked out of alignment.Something to think about with the iMac is that it's shipping weight and bulk is a whole lot heavier than a typical monitor and the LCD panel is wedged between and fixed to metal, glass and the logic board and components behind it. Now I've seen how the FedEx and UPS guys handle packages coming to my house and office...factor in a trip all the way from Shanghai for a mega parcel and I'm sure there's a lot rough handling that the iMac has to endure. I think it's entirely possible that the backlight diffuser is getting warped in transit, perhaps at certain contact points like the lower corners. Heat from the system behind might make the problem appear worse over time as some users have commented.
If this is the case, then it would explain why some folks are getting their 5th and 6th yellow-tinged iMacs whereas others are fine. Apple could do all the QA in the world on the factory floor but it wouldn't help if the problem occurs during shipment.
Bottom line is that this would be a serious product design flaw which would take alot longer than a few weeks to fix and retool for. The only other solution would be for Apple to replace the LCD panels for those machines on which the diffuser was warped during shipment, which appears to be the direction they are heading.
i ordered an 4870 card for my mac pro about the time it got out, march 3rd. Shipping date was set to april 21st. on that date it jumped to may 19th. anyone got their cards, or got an earlier shipping date? i live in norway btw. maybe that has something to do with it.
View 24 Replies View RelatedCan anyone suggest a USB wireless adapter that has OSX drivers shipping the box with the product? for 10.4 +
View 2 Replies View RelatedI want my status to appear idle so that it seems ive been away from my computer. Is there an app or something where it will show me as idle on ichat?
View 2 Replies View RelatedI called Apple and requested an RMA for a new machine I recently received; is there a way to check the status of the RMA online?
View 3 Replies View RelatedI remember about a year ago that people were discovering you couldnt use Bootcamp/Windows7 with a Macbook Pro that was eqipped with the OEM SSD drives.
I was wondering if in the interim Apple has done something to correct the situation or if I should stick with the 5400 drive.
So I had my MacBook Pro charging, and it said it was on 59%. For some reason, it had been stuck at 59% for a while. I highlighted the power readout in the menu bar, and it said 20:00 until full. I unplugged the charging cable and plugged it back in, then it read 89% full and charging.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
I have a Mac Book Pro running 10.6 .... Now the battery cannot be charged !
How do I check whether it is the battery problem ?
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
Before there was a discussion on a couple of apps people had written that show in the status bar whether you're using the Intel HD or Nvidia 330M on an i5/i7 macbook. I now have an i7 MBP but can't find the thread anywhere (tried MRoogle too!).
View 7 Replies View RelatedAm i just crazy? Or does anyone else check their repair status 4+ times a day?
View 1 Replies View RelatedSo when I bought this the guy said that Apple installed a new battery on it recently. I believe him because when I downloaded the iStat Pro widget it said only 2 or 3 cycles which is because I calibrated the battery. But I just finished charging and the light is green. But it says the charge is only at 97%. I don't see why it should be like this. Also when it's not plugged in the battery only lasts maybe 3 and half hours from just surfing on the internet. But I thought it was supposed to last like 6?(I'm thinking that since mine is an older model, that could be it.
View 2 Replies View RelatedMy aluminum unibody MacBook is plugged in to the power adapter and the light on the adapter is green. The battery status indicator says "Not Charging." What do I do?
View 24 Replies View RelatedI am at 99% and 82 cycles and I've own mine for 2 months now. This is my very first mac so am I OK for now?
View 24 Replies View RelatedI'm new to this, but since today the screen of my Macbook doesn't get out of it's dimmed status anymore. Whether I'm on adapter or battery, no matter what I do or press, the screen is dimmed [like pressing F1 till it's on 0 notches, so when the screen seems off, but you can still see if you look hard].
Even if I adjust the brightness, I can see the notches going up, even full, it doesn't change anything to the brightness. I tried restarting multiple times, also with command-option-p-r to reset it, but no luck.
Does anyone have an idea what I can try to fix this? Any idea what the problem might be?
I accidentally left it on while I was doing some chores. When I came back it was dead (no battery). So I plugged in the charger and it immediately turned bright green when its supposed to be orange first, right? MacBook says (Not Charging) but power source: power adapter, green light is on, on the Magsafe. It's running by the power source because the battery is at 0%. I've had the charger plugged in for less than/about an hour and the 0% still hasn't changed. (Not Charging) is still there too. I bought my Macbook last August 2009, so it's not even a year old.
View 9 Replies View RelatedHey all, I'd like to know how to check the status of my hardware, particularly my RAM and graphics card. I remember partitioning some of each, along with some of my harddrive space, to an application a while back that has now been deleted. However, it seems as if my computer isn't running as quickly as it had been. Is there any way to redirect all hardware power to my harddrive, and delete all other partitions? I haven't messed around with it much, yet, but I'd like to get a lead from someone who has done it before.
Info:
Mac OS X (10.7.3)
It's a new Momentus XT 750 that I bought to replace the orignal HDD.I can read and write and even installed Leopard via USB, but the SMART status was not appearing 'verified'.After installing I hook it up to my MBP and it could not be recognized.
Info:
MBP 2.8G Intel Core 2 Duo, Mac OS X (10.5.8), 4Gb RAM
Some games seem to close off menu bars and everything else.My daughter plays the sims 3 and sometimes uses battery power, but she always panics that the mac will just shut down due to lack of battery power.
How does she see what the power is at while playing the game? ts normally just in the menu bar, but like i say this game overrides all that info until the game has been quit.
Info:
iMac, OS X Mavericks (10.9.2)
What the icon "check client status" does? It just noticed it on my MacBook Air while I was trying to figure out why my computer is running so slowly? Can I delete it?
View 8 Replies View RelatedI just got a new MacBook Pro today (2.4Ghz i5) and it kept freezing randomly, such as opening safari. I open disk utility, it says that S.M.A.R.T. is verified, when I verified the disk, it said "invalid node structure" and to repair using the Mac OS disk. I booted from the disk, disk utility failed to repair twice, but after the 3rd repair, it said repair was successful, but after a few days, same problem "invalid node structure." I've repaired the disk many times and I always get the same result a few days later, I've also reformat the laptop 3x with same problems reoccurring after a few days.
I read that using disk warrior was best to solve these problems, except I there were mixed results, some people said that it fixed their problems, others said it was just a temporary fix, so I don't wanna pay for a program that may or may not fix my problem.
Last experiment, I popped in the HDD into my sister's MacBook Pro (2.4GHz Intel Core2Duo) and did a clean install. After a few days of use, it starts to slow down, ran Disk Utility, S.M.A.R.T. status is verified, clicked repair disk, and same thing "invalid node structure."
I went to apple, Apple "Genius" said that there was nothing wrong with my laptop and just told me to do a clean install, which I did many times already. They kept it over night and called the next day to say that there was nothing wrong...
Having said this, how accurate is the S.M.A.R.T status? I search google and some people say that "Invalid node structure" is a sign that the HDD is failing.
Any of you guys experienced this problem, where the S.M.A.R.T. status is verified, even though the HDD is dying? I don't have money to experiment and buy another laptop HDD to install just to test this out so can you guys tell me your experience?
Is it normal for the battery of an 1 month old MacBook Pro 17" to display the Health status 98% in iStat Pro widget. The MBP is on 4 cycles and the battery was calibrated 2 times: First when I received it and the second time was yesterday.
View 1 Replies View RelatedDo take a look at my current battery capacity. How can my current battery capacity be higher than the Original battery capacity? Anyway if you want to know how I keep it at 99-100% battery capacity
1] Set brightness level to the lowest or most comfortable
2] Turn off Bluetooth/Airport when not in use
3] Try not to use the iSight camera too much
4] Try to do activities that will decrease your battery life only when it's plugged in
5] Put it to sleep instead of shutdown.
6] Keep it plugged in as much as possible, it's okay to use 20-30% of the battery when you're in the bus or in places that has no power adapters. In fact, it makes the MBP healthier.
What is the philosophy why the Retina MBP has no Sleep Light and Battery Status LED?
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
Shutdown my MacBook pro last night turned it on this morning and I am not getting apple chime only a blank screen and a flashing sleep light?
Info:
MacBook Pro, Mac OS X (10.7)
My order MBA 2012 2.0GHz Intel Dual-Core Core i78GB 1600MHz DDR3L SDRAM256GB Flash StorageKeyboard/User's Guide-THACountry Kit-THA status change to "Preparing for Shipment" But why still ships 2-3 weeks?
Info:
MacBook Air, iOS 5.1.1
My magsafe 2 is plugged in but the light's not on. My battery status shows it plugged in, but says "battery is not charging."
I've reset the SMC several times and have been able to get it to work again, sometimes after going through the process several times. Sometimes the yellow light stays on even after I unplug the magsafe.
