Mac :: Hinge Creeks While Slowly Closing Screen - When Macbook Is Closed, Screen Is Uneven?
Jul 26, 2009
I have 3 problems with my aluminum macbook and I think that they are all related and are caused by each other.1) The hinge creeks sometimes when I slowly close the screen and I'm afraid it will only get worse as this just started happening.) When the macbook is closed, the screen is uneven. The right side does not completely close and there is a gap between the base of the computer and the screen. However, the left side is just fine unless I push down on the right side then the left side just goes up and becomes uneven.
My Air's screen is slightly darker at the bottom (only on a few millimeters, but still). It only happens on a white/light background though (I don't have my dock at the bottom). In comparison, the screen of my MacBook has a very uniform backlight. Does anybody else have this issue?
I bought the new macbook pro 15inch 4 days ago. Today I just noticed that the hinge on the back of my laptop is uneven can I ask for a replacement? I still have the 14 day warranty.
My Macbook Pro is fairly new, and the hinge on both side is already making squeaking noise when I open my screen. It gets a bit annoying, I open it from the center top of the screen, not by the side. Is this a problem that I should be taking to the Apple Store? Or this can be fixed easily?
I know this may seem silly to ask, but I have read that the hinge is a bit vulnerable on the macbook pro, & mine will mostly be at home on a desk, but I may occasionally take it out. When I have it at home & shut down for the day, will closing the lid, & then opening it the next day weaken it? could I just leave the lid open when the laptop is shut down at the desk?
My 13" MacBook Pro (Mid 2011) is making a loud click, or snapping noise whenever the clamshell is closed, or moved a little sometimes. It's becoming very persistant and doesn't seem normal. Most of the time it does make the noise (which is from the back right). I'm taking it in tomorrow under warranty. Any suggestions? Is this normal? The screen also moves smoothly and is always in place. It's all strange and hopefully they can replace the hinge.
On another post...I indicated that I bought a MacBook Pro 13 inch laptop loaded up with all the goodies and decided to cancel my order due in part to possibly saving by installing my own SSD and RAM. I did not really mention the main reason that I cancelled my order....
I did not mention that I went to a local Best Buy and checked out the 13 inch MacBook Pro on display. I was kind of shocked to note the amount of wiggle that was present on the display screen of the 13 inch. I read another thread about the screen becoming loose and wobbly on the 13 inch MBP after time.
Does this occur on the 15 and 17 inch models as well?
I have a 3-4 year old 15 inch MBP and the screen is still solid as a rock. I hate to spend dollars on a lesser quality product so I thought I would ask if this screen weakness comes with all of the newer MacBook Pro models.
(I did not check out the 15 or 17 inch models at Best Buy...but I intend to go back and see if they are weak also). I want to buy a 15 inch MBP...so I hope that they are solid as a rock as my older MBP.
I noticed that my basically mint condition Mid2010 MBP's lid started clicking occasionally when I close it. It seems to happen on the left hinge, and only after the screen has been open for a while. Does anyone know what this is indicative of? I'm assuming that it means the screws on the hinge are either too tight or too lose. Should I attempt to fix it myself? I really do not feel like going to an Apple store to get it repaired if it's something simple like tightening a screw (yes, I know that in order to get to the actual lid, you have to do a lot of other disassembly, I've done it before).
Today I noticed that on my MBA Rev A, right screen hinge got damaged somehow. Wife said she heard a crack when she was closing the screen, and sure enough, something's messed up inside and won't close fully anymore. Screen also won't keep open as firmly as before, as right hinge became loose.The warranty is out since last year, so I tried opening it to see if there's something that I can do. Looks like some part of the hinge is broken. One little metal piece fell out of hinge when I scratched a bit there with a tiny screwdriver.On top of that, just last month my battery stopped holding charge anymore (have to keep laptop plugged in all the time or else it shuts down losing all my work when the battery meter shows ~20% life remaining)
on my old white 13" MB when I pick up the computer to take it to another room with the screen open it would never move back and forth. When I would tilt it at a 45% angle it wouldn't move. Now I just purchased a new 15" MBP (sweet btw). My only issue seems to be that when I tilt the computer 45% or more the screen almost closes.Is it a weak hinge? Can that be tightened at an apple store (I am lucky and have 4 that are within about 35 to 40 minutes here in NJ)?
Just sent in my 2-month MacBook Air which started squeaking in just a couple of weeks. Luckily still in warranty and they said they'll replace the whole screen clamshell for me for free.Certainly I wouldn't mind much since it's free, but is it absolutely necessary to replace the whole thing just to stop the hinge squeaking?
I have a macbook pro, and the screen/bezel is broken. Every time I open and close it I have to hold it etc. I am the only one who can use it with out making it completely horrible. Maybe drilling in some kind of brace or something. This stinks and stupid Apple is saying it's my fault (under warranty), and this just came about over time.
Lately I've noticed a loud popping noise when I adjust the tilt angle on my screen. The noise comes from the right side of the screen and is very loud. This happens when the screen angle has been stationary for a few minutes. I went to the Apple Store today and the genius told me it was normal.
After opening the lid yesterday morning, I noticed that the screen was extremely flimsy. Usually, it hardly rocks when i tap it, but now when I tap it, it rocks back and forth. I made an appointment with a local apple store for later this evening, but would they be able to fix this? I am very gentle with my Mac and have never dropped it. I also have AppleCare on it if that makes a difference.It seems to be the left side of the screen moving more than the right side is
Info: MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I just bought a 24" screen for my macbook so i can really enjoy movies in my room. I was wondering if there was a way for me to close my laptop screen but still watch the movie ( so i dont see double picture) I know i can dim down the macbook's screen to almost dark but the screen is still on and using power. If anyone knows how to do this let me know.
I was cleaning my 17" MacBook Pro today (purchased in March, 2011), and when I was cleaning near the screen, I noticed that the black plastic of the hinge made cracking noises as I ran my cleaning cloth across it (and every time I do it now with my finger). I have never had this happen before. Is this a known, harmless defect or is it something I should get looked at by someone at an Apple Store (still under AppleCare).
Info: MacBook Pro, Mac OS X (10.7.2), 2.3GHz Intel Core i7
Ok the patient here is a new 2.0 Ghz Macbook. I just woke it up- or tried to. the sleep light was on solid, not pulsing with as it does when sleeping. It didn't respond to key presses of track pad presses. It did power back on after pressing and holding the power key. The desktop was greyed out and a metered progress bar came up and it slowly booted bakc up then resumed as normal. Is this that deep sleep mode, or is this something else?
Iv had my macbook pro for probably a little bit under two years, I bought it when i started college and I am currently finishing my second year. I cannot complain about the performance at all as I have it upgraded to a solid state hard drive and 4GB of ram and the machine is a beast but some physical aspects of it do bother me a little bit. When living in the dorms last year it was hard to keep the machine in top shape especially when I had no idea where my desk was under the pile of GROSS in the room :P, thankfully I live in an apartment now.Anyways the problem that bothers me the most is the monitor hinge. I have seen this on a few laptops after a few years but basically when the LCD is open i can tap it lightly from behind and it will shake in a way it did not when it was first bought. It seems like it is a bit lose either right around the LCD or in the hinge area. I do not mind spending a few bucks and I am very good with my hands and computers in general, currently studying engineering, so I do not mind opening it up and doing some tweaks. Is there anything i can buy to improve this with or tutorial I can read on improving it? I would imagine this is a problem that would affect alot of people with this model of macbooks and as I never really did anything to cause this.
Is there a way to show login screen only when I close the lid of MBP but not when it goes to screen saver mode? So far I only found the setting including both in "Security" section in settings.
When the screen on my MBA is closed down the rubber edge on the bezel around the screen does fit tightly on the left side, but on the entire right side, there is as small gap between the rubber edge and the base of the MBA. At the rear right the distance between the bezel and the base of the MBA is one milimeter and since the rubber edge takes up less than half of that distance, I'd say the gap is at least half a milimeter. Does your screen fit tightly all the way around or is a small gap normal? I'd think the rubber edge not only avoid metal against metal, but it will also prevent dust or dirt from entering the screen / keyboard / touchpad area when transporting the MBA.
I'm very new to Macs (4 days) and hope to get involved in video editing on a professional basis. I have matched my 13" macbook pro to a 23 inch widescreen monitor and wanted to inquire as the best way to keep the macbook pro ON, but also save on space. I have heard of 'Insomnia' which disables the sleep function on the mac and wanted to check if, by dimming my screen down to off (the minimum brightness the screen will go) and turning on 'insomnia' will that be enough to prevent the screen/unit from overheating?
I've got a late 2008 15" unibody macbook pro. For some reason, the screen won't turn off when I close the macbook. The Apple on the back of the computer remains on and I can see that the screen hasn't powered on at all.
Is there any way to set my macbook pro to shut off rather than going to sleep? My problem stems around my family not shutting off the computer after they are done using it. They will simply shut the lid, putting it to sleep. Normally, this isn't a problem, but the computer then may go unused for days which then leaves the battery depleted. I cannot get them to shut off the computer, I could set the computer to shut off when the lid is closed rather than go to sleep.
I recently set up my new macbook pro with an Apple Cinema Display. The setup is great except that my wifi connection only works when my MBP is open. The second I close the screen the connection stops working. It's not a proximity issue since it works just fine when it's open.