OS X :: Hinge & Opening Closing Lid Every Day Of Macbook Pro
Jun 23, 2010
I know this may seem silly to ask, but I have read that the hinge is a bit vulnerable on the macbook pro, & mine will mostly be at home on a desk, but I may occasionally take it out. When I have it at home & shut down for the day, will closing the lid, & then opening it the next day weaken it? could I just leave the lid open when the laptop is shut down at the desk?
View 2 Replies
ADVERTISEMENT
May 25, 2012
My 13" MacBook Pro (Mid 2011) is making a loud click, or snapping noise whenever the clamshell is closed, or moved a little sometimes. It's becoming very persistant and doesn't seem normal. Most of the time it does make the noise (which is from the back right). I'm taking it in tomorrow under warranty. Any suggestions? Is this normal? The screen also moves smoothly and is always in place. It's all strange and hopefully they can replace the hinge.
Info:
MacBook Pro, Mac OS X (10.7)
View 1 Replies
View Related
Jul 26, 2009
I have 3 problems with my aluminum macbook and I think that they are all related and are caused by each other.1) The hinge creeks sometimes when I slowly close the screen and I'm afraid it will only get worse as this just started happening.) When the macbook is closed, the screen is uneven. The right side does not completely close and there is a gap between the base of the computer and the screen. However, the left side is just fine unless I push down on the right side then the left side just goes up and becomes uneven.
View 2 Replies
View Related
Jan 7, 2009
When ever i open or close the case for my white macbook it makes a creeky noise. Is this normal or should i go to the apple store and get them to check it for me?
View 8 Replies
View Related
Mar 5, 2008
As anyone else noticed a "creeking/cracking" noise when opening and closing their MBA? I have babied my MBA ever since I got it, no drops or dents, and then one day it started making a creeking and cracking in the lower right hand corner of the screen (next to the hinge). Is anyone else experiencing this? Has anyone come up with a solution to eliminate the noise?
View 13 Replies
View Related
Jun 12, 2006
its normal for the lid to be making a plastic cracking noise when closing and opening it? Its like a clicking noise as if it catching on something as its being opened. I didnt notice it at when i first got the unit, but now it seems to be getting progressively worst. Also was wondering, does anyone else find the case flimsy around the ports on the left handside? I can push the plastic in and out with my pinky.
View 8 Replies
View Related
Jul 25, 2009
I received my 15" MacBook Pro 3 days ago and tonight I happened to notice a slight click noise when i open or close the lid. It sounds like it is coming from the hinge area.
View 5 Replies
View Related
Aug 26, 2014
MacBook Pro with Retina Display OS 10.9.4
Finder kept opening and closing.
No Google Drive or IDrive.
Booting in Safe mode, no issues with Finder, but now the system will not come up at all. Blank screen.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 3 Replies
View Related
Oct 12, 2010
is there a way to open all tabs in a bookmark folder at once without having Safari automatically close the ones already open?In firefox when you click to open all bookmarks in new tabs, they start right after the last tab already open but with Safari you lose the tabs you were using!
View 4 Replies
View Related
Jun 11, 2010
Today, suddenly, my finder has started quitting whenever I go to the "applications" tab. Every other part of the finder works but the applications refuse to open. It's worrying me because I think it could be one of those few mac viruses. I'm running a virus scan at the moment to see.
Also on the possible virus front. I had cleaned my HDD the other day and gotten it to 58 gigs left of free space. A few days later it came up as 78 free though which confused me.
View 24 Replies
View Related
Dec 10, 2008
I am starting to a hear a clicking sound opening and closing my new MBP. It sounds like a loose hinge or a cable getting caught or something.
I took it to an Apple store to see if they could pop it open and take a look but they said they would have to send it away and it would take 7 to 10 business day. I really don't want to be without my new computer for 7 to 10 days. It isn't that big of deal but it does tick me off every time time I open and close and I worry that if it is a cable it would eventually cause a problem.
View 1 Replies
View Related
Sep 8, 2006
I got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Has anyone attempted to lubricate the hinge in their laptop themselves? I removed all of the bottom paneling and looked at the hinge, but didn't see how to separate it from the case easily. Would it be a bad idea to try to squirt a little silicone lubricant into the hinge to see if that helps the issue? Is there another trick I could try.My mom has a Unibody Pro with a hinge that glides nice and smoothly and it's annoying mine is no longer working properly like this.
View 4 Replies
View Related
Feb 15, 2007
Build-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
Quite a few seem to have this 'issue' and I thought maybe somebody has figured out a solution?Such a shame on an otherwise perfect machine. I would have preferred the same kind of rubbery plastic that was on the old generation MBP
View 2 Replies
View Related
Aug 5, 2008
After playing with my friend's MacBook, and having a long hard think, I'm definitely of the opinion that the hinge on my MacBook is far too loose. It can still support itself, but I get major wobble upon opening, it even wobbles when I type (not ferociously).
I don't get any sort of resiliance when I try to open or close it, I literally have to be careful as so not to slam it, it's like I'm closing thin air.
It just doesn't feel sturdy enough for a notebook which needs everyday carting around and use.
Also when the MB is closed the top lid (with the screen) slides a bit this way and that over the base. Only a few millimeters, but enough to notice.
The problem is, I'm most likely only going to get one opportunity to get to see an genius.
The MB is covered by AppleCare and so forth, but will the genius open the thing up right there and then and give whatever needs tightening a good tighten?
Have any of you experienced this issue before and was it solved, and if so how? (Time, in-store or send off job, etc etc).
View 8 Replies
View Related
Oct 24, 2010
I just unboxed this beauty. This is my first mac ever and I love it so far. However one thing I noticed straight out of the box was how loose the hinges are. The screen tilts if I move the macbook air to a 90 degree angle. I've own quite a few laptops but this is the first one with a loose hinge straight out of the box. Is this normal or should I be meeting with a nerd?
View 24 Replies
View Related
Dec 7, 2010
On another post...I indicated that I bought a MacBook Pro 13 inch laptop loaded up with all the goodies and decided to cancel my order due in part to possibly saving by installing my own SSD and RAM. I did not really mention the main reason that I cancelled my order....
I did not mention that I went to a local Best Buy and checked out the 13 inch MacBook Pro on display. I was kind of shocked to note the amount of wiggle that was present on the display screen of the 13 inch. I read another thread about the screen becoming loose and wobbly on the 13 inch MBP after time.
Does this occur on the 15 and 17 inch models as well?
I have a 3-4 year old 15 inch MBP and the screen is still solid as a rock. I hate to spend dollars on a lesser quality product so I thought I would ask if this screen weakness comes with all of the newer MacBook Pro models.
(I did not check out the 15 or 17 inch models at Best Buy...but I intend to go back and see if they are weak also). I want to buy a 15 inch MBP...so I hope that they are solid as a rock as my older MBP.
View 3 Replies
View Related
Mar 18, 2009
It appears that the MacBook Air may have a hinge problem.
Mine sure does, exactly as described, see [URL].
Not sure if a lawsuit will fix mine, but if it gets noticed maybe Apple will respond. Anyone else having this problem?
View 4 Replies
View Related
Jun 26, 2009
So I just got my MacBook Air (rev A) back from AppleCare after my hinge (like many others', apparently) decided to randomly bust itself. I was very pleased that when I took my MBA to the Apple Store, they didn't bat an eye about replacing the hinge (I'd heard horror stories about Apple denying the part was defective and calling the damage a user error, even with computers covered under warranty). But I was shocked when my package arrived today and the letter inside detailed the parts replaced. Keep in mind, the only thing wrong with my computer (as far as I could tell) was a broken hinge. Here's what they replaced:
Antenna window
Video Display Panel
Camera
Bottom Case
Display Housing
Clutch
Clutch (two different part numbers)
Bezel
Top Case
Logic Board
View 2 Replies
View Related
Mar 28, 2010
I want to take it to an Apple Store but doubt they will help me since my AppleCare ran out.
View 5 Replies
View Related
Jul 11, 2010
It seems like the hinge has stiffened up since owning it. Sometimes makes a pop noise when moving it from a non-moving position. I would imagine it's the plastic bezel that's kinda loose and snappy if you touch it at the bottom of the hinge but I dunno. Any one else? I can deal I just hope it doesn't cause damage.
I need this machine to be fully working when I go abroad in the Fall.
View 4 Replies
View Related
Dec 21, 2010
I noticed that my basically mint condition Mid2010 MBP's lid started clicking occasionally when I close it. It seems to happen on the left hinge, and only after the screen has been open for a while. Does anyone know what this is indicative of? I'm assuming that it means the screws on the hinge are either too tight or too lose. Should I attempt to fix it myself? I really do not feel like going to an Apple store to get it repaired if it's something simple like tightening a screw (yes, I know that in order to get to the actual lid, you have to do a lot of other disassembly, I've done it before).
View 1 Replies
View Related
Dec 24, 2010
I just purchased a new 13 inch macbook air with the 1.86 ghz processor , 2 gb of ram and a 128 gb ssd.
It is currently being delivered to me through UPS but I am worried if this new generation is plagued by the infamous "Hinge issue" that the 2008 model had.
Can anyone comment on the hinge structure of the new model and if it will last at least 3 years without hinge problems ?
View 4 Replies
View Related
Jan 7, 2011
Is it normal to have a slight gap between the screen hinge and the body? On right side there is about 1mm and on left side there is 2mm.
You can see it when the screen is open and when its closed on the back.
Ill try to attach pictures later.
But what do you guys and girls think? Does yours have a gap?
View 11 Replies
View Related
Jan 28, 2009
My new week old unibody macbook hinge is so tight that when i open it, the rest of the macbook slides back a bit.
I have seen radtech's glide kit to adjust the tightness of the hinge of the old macbooks and powerbooks but nothing has been mentioned of the unibody.
View 8 Replies
View Related
Apr 27, 2009
So both of my hinges died and no applecare. So I wanted to see if anyone came up with a DIY solution or know anything about hinges and is it possible to make some little one and maybe for other air users.
There is no way I am paying for a new air or repairing it. Im almost close to getting my Mac Pro.
The only thing on the hinge is Patent number: RE37712
[URL]
Any more info would be nice.
View 8 Replies
View Related
Jul 10, 2009
Well I brought my white early 2009 MacBook to apple today because it is cracking at the hinge near the speakers. They told me that the cracking isn't under warranty. Is this true or is only the top case covered? I can post a pic soon. It runs the whole length of the inner part of the hinge.
View 14 Replies
View Related
Aug 29, 2009
Everything works perfect except this one thing. Was wondering what you guys thought of this problem. Didnt return it because i was hoping that it would go away with wear in. I checked the back, nothing is coming out of place, its just theres a sound when i open the macbook after its been closed for more than 20 minutes.[URL]
View 22 Replies
View Related
Sep 28, 2009
Macbook Pro is fairly new, and the hinge on both side is already making squeaking noise when I open my screen. It gets a bit annoying, I open it from the center top of the screen, not by the side. Is this a problem that I should be taking to the Apple Store? Or this can be fixed easily?
View 2 Replies
View Related
Oct 1, 2009
Anyone else have a squeaky hinge on a Rev C or any other? I hear all the talk about lose hinges and broken hinges but the absolute only worry (and it is not a big one) I have about my magnificent two month old Air is the squeak it makes sometimes when I open it up. I suppose that a too tight hinge could lead to a broken hinge but it doesn't sound like the kind of squeak that could lead to breakage. But who knows. If I open it very slowly it doesn't make it. Eventually I'll probably take it in, but not for now. Everything else looks and works too well.
View 3 Replies
View Related
Jan 7, 2010
My hinge problem is much like that of the MacBook Air. I have a good 3/4" of play in my screen before the hinge engages in movement.
My 1 year Apple warranty ended last week and I just noticed this problem now.
I've got a Best Buy warranty (the anything but fully submerged warranty basically), but I don't want to go without my computer for two weeks.
I'm really handy and have a tool for anything, including torx wrenches which I hear you need to fix this.
What I'm getting at is what are the exact steps I need to follow to fix the unnecessary slop in my hinge?
View 5 Replies
View Related