Mac :: Downloaded The Latest Update To Parallels - Shut Down Parallels Before Running Update?
Jan 20, 2009
I just downloaded the latest update to Parallels. I shut down Parallels before running the update, and I even did a reboot of the computer.And yet every time I run the update program it keeps telling me to "shut down these running and suspended virtual machines" and refers to "My Boot Camp"Like I said, I rebooted the computer first. There are no virtual machines running. Zero, zilch, nada. So why in the ******* is Parallels telling me that there is? "My Boot Camp" isn't even a VM that I use
I recently downloaded the lastest OS update (Lion X 10.7.4) on my MBP that I purchased in November of 2011, and since downloading it my MBP has been making a constant "humming" noise from the right speaker/disc drive area. I also don't have any audio output for FaceTime or Skype. I attempted to use Photo Booth to record a video and it doesn't record any audio. I attempted to reset SMC and reinstall Lion with no resolution of the problems.
I ran an update today for Java and I'm now having trouble getting chat rooms to run. I run three or four chat rooms at a time and now I can only get one to run. When I log out I have to quit Safari and then log back in to the chat room. I've never had a problem like this before so I have no idea where to start. Although I did reinstall the latest update with no success and also repaired permissions.
Just did the latest Mac software update a few days ago and noticed that my MBA runs hotter (fans are constantly screaming) and the battery life now is about 1:15 hours on a full charge versus 3:30 hours before. Anyone else experiencing the same issue?
Yesterday Apple released Safari 5.0.1 and Magic Trackpad and Multi-Touch Trackpad Update 1.0, but Software Update on my Mac makes me able to download only the first one (Safari 5.0.1) - which I did. Why can't it find the Multi-Touch Trackpad Update?
- My MacBook is fine (it's 13-inch, Mid 2009).
- My OS is fine (Mac OS X v10.6.4).
Sure, I can download it manually, BUT it makes me really annoyed if something on my Mac works not as good as it should.
I have problems since applying the latest security Update 2009-001 and Java 10.5 Update 3, I have 10.5.6 on the new unibody 2.4ghz and have completely lost the ability to connect to my wireless access point which is an apple airport extreme base station.
I can sometimes se the base station but cannot connect to it and sometimes cannot see it at all. I have three other apple computers at home all less then a year old running the same build of 10.5.6 but have not updated them and they all are fine.
This one was perfect untill I applied the update.
The machine I am having problems with is partitioned with windows 7 beta on it which has no problems connecting to the base station, which indicates that its not a hardware problem but more then likely the update which is causing the problem.
Is there a way to uninstall the last update or delete it? Any one with a similar problem or know how I can fix it, I have googled but cannot seem to find anyone with similar problems.
Windows has locked up and I cannot shut it down. If I shut down the entire computer, I only shut down the Mac side, not the Windows side. CTRL+ALT+DEL does not work.
i'm abit ocd with stuff on my computer, so stuff like this really bothers me. i had parallels one my computer for a little while whilst i needed windows. now i don't i got rid of the partition and uninstalled parallels. but, .exe files and some other files still show the parallels logo, as if it wants to open them in parallels.
is there any way i can change this? i've removed everything i can think of in preferences, application support, startup items, receipts, etc to do with parallels but to no avail.
I have Parallels 3 installed, mostly to run MS Money. Last night I installed Snow Leopard, unaware that Parallels 3 is not compatible. It appears that I need to go out and buy Parallels 4 as that will work with Snow Leopard.
My question is will all my data within Windows remain if I install 4 or will it be a completely new Windows? And if so, how do I go in and retrieve my MS Money data as I can no longer access it with Parallels 3.
trying to install windows xp using parallels 5. i downloaded and iso file for windows and i double clicked it and it showed on the mac desktop, BUT parallels wont install windows from that. i am sorry if there is a thread already on this matter. i know i am doing something wrong but cant figure it out since i am new to all this.
I was planning on installing Win7 on it and using Parallels for the times I have no Mac option (specific games or apps).
Should I install it as a boot camp partition and then link it in Parallels or just do a clean VM install in Parallels? I'm curious as to what the experiences are and what is my best course of action when my machine shows up.
I just bought a new iMac last night, I am finally leaving the PC world. I need to install a OS for parallels since I have alot of PC programs I need to run. I have ran thru the paralells set up and installed a windows xp sp1 home edition cd when prompted but it will not load properly. The XP install disc is a disk I got with an older Dell laptop. And it says for distribution with Dell computers only. I starts to load, I input my activation code and it starts to install.
The first few times it got hung up saying that it is installing and will take 39 minutes to complete but just sat there for hours. Now its missing some line of code. O well I have to get a new copy of XP I guess. Here is the issue, I must have XP with nothing new then SP2. When I run sp3 my CAD program (softplan) cannot print to scale. They said its a problem with sp3 and I would have to upgrade V14 to fix this issue. Can anyone tell me if it is possible to get this current XP sp1 to load, or can I get an XP sp2. Everything I find is preloaded sp3.
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_0_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Mobile/8A306) I am waiting to purchase a new Mac Pro, when I do, I still need to run some win apps (non games via Parallels). What impacts to the speed of these would one likely see? I plan to spec my new MP with the fastest single chip processor, fastest CPU, and at least 8 gigs ram. Config advice also welcome.
This is the first time I've tried OWC memory. So far, so good - the Mac recognizes the RAM and boots okay. Everything I've tried thus far post-upgrade works. I am a happy camper now - my Mac was a bit sluggish due to running out of physical RAM running Parallels.
I just installed bootcamp on my machine. I didn't think I would need to run both osx and xp at the same time but parallels is looking good to me right now. Since I already installed xp via boot camp, can I just download parallels from their site and be able to run both OS's at the same time, I could not find this information on their site.
Ever since I upgraded to 10.6 (clean install from Leopard), Ive noticed a strange but irritating issue here, it happens with several sites but here is an example:
MBP: Safari and Firefox: I cannot browse to [URL:...] MBP: Parallels running XP: no problems going to [URL:..] ok.. my old XP laptop as a last resort: no problems at all.
So what could be happening here, and what could I do about it. Tried rebooting my Macbook Pro 15" and AEBS and ADSL router.
If I could I would get rid of everything related to Microsoft but unfortunately I need to use Windows applications for my work. Specifically, Autocad Civil 3D, Revit Architecture and a bunch of structural engineering programs. I have tried running these applications on Parallels on Mac systems such as MacBook Pro Mid 2009 (2.93 C2D, 4gb ram) but was not satisfied with the performance. Autocad was lagging even when working in 2D. I don't even have to talk about Revit... I never had the opportunity to test this on more powerful systems and this is where I need your advice. Is it possible for the Mac Pro to run these applications on Parallels seamlessly? That is, as if you were running Windows on a PC? What is more important CPU, RAM, GPU? To catch up with a few possible comments, a) I don't want to run Windows via bootcamp, b) I am aware that Autacad is coming to Mac OS but I need the extra features of Civil 3D and Revit.
How do I uninstall ubuntu running trough virtual machine on my macbook. I wanna get rid of it but don't really know what to delete? is there uninstall app or something. I tried with my fried google but couldn't find anything.
Do I have to install a Windows 7/RC build on Bootcamp before I can use it with Parallels? Or if I already have it on bootcamp, I have to install it all over again with Parallels? And I was thinking of only having RC as my secondary OS until my Windows 7 disc comes. When that happens, do I just delete all my RC stuff from bootcamp to make room for Windows 7? I'd also lose all my documents and whatnot right since I can't upgrade to Windows 7 from an RC.
I received parallels 4.0 as a gift 2 months ago and did not install the software. But now, as win7 is out, I am really interested to get it installed, but is it recommended to run Win7 (64-bit) on Parallels 4.0 and not the latest version of Parallels? Sadly, I could not get it exchanged for parallels 5.0 in my local stores. Will it crash or lag my macbook pro? My system is 2.66GHz and 320GB, bought in oct 2009 mbp.
I have a Late 2009 27" iMac. I'm running Parallels so I can use ACAD LT 2010. If I load a music CD without Parallels running, no problem: it loads and plays fine. As soon as I start Parallels (with Win XP Pro) the CD contents disappear from iTunes and a couple mp3's are all I get (listed from the XP side of things I guess...) I have checked the obvious things. The CD drive is set to share. Beyond that, I really can't come up with anything in my pocking around with settings.
I have one program that I will have to run in boot camp. The rest of the time, I would like to run in Parallels. Will I have to install XP twice to do this and thus take up more hard drive?
I am running windows 7 on via parallels on my mac book pro with 2.26GHz and 2GB of memory and when I am running 7 the same time as leopard i get a lot of lag does anyone know why ?
I am having a very hard time installing doss 6.22 on my Mac. Why would I want too? Well cause of work, we have some a lot of old data at work that was collected over the years using dos programs and I need to go threw it and pull out what I need, when I need it. So having it on my laptop would be great. I have tried both Parallels & VMware with no luck. I can't get them to realize that I have a floppy drive, it's a usb floppy drive. I have 6gig of memory running snow lepoard. I have been thinking of trying the Sun Microsystem software but thought I would ask here first.
