I want all wires gone! I have right now:
A/C
extension
power strip
3-splitter
monitor: power, dvi
monitor: power, dvi
modem: ethernet, cable cable, link to router, power
router: link from modem, power, ethernet
usb keyboard
mac pro power
I currently have a speaker setup consisting of Logitech Z-640's and am using this adapter to connect my speakers to this monster aux cords for my macbookpro and iphone. My question is, is there a way to hook up 2 devices (my computer and HDTV) to my speakers without having to plug and unplug them ever time? and a way to eliminate the wire clutter? Someone recommended a USB sound card?
I bought a MacPro two weeks ago and have just taken delivery of the bluetooth module and Airport Extreme card design specifically for the Mac Pro. I've put the bluetooth card in and connected up the cable that has "BT" label on it. I thought it would be same for Airport Card but there's 3 cables to choose from labelled intuitively "1" "2" and "3". All with the same connectors on the end and all taped up together. The Airport Extreme card requires 2xcables to be connected. Anybody out there have a MacPro with Airport pre-installed and can take the side off and have a look at their config for me please? They are supposed to be a service center install hence don't come with a manual, they refer you to the AppleCare Service Source Website.
I have a Logitech Dinovo Edge and a Logitech 470 Travel Mouse.. the keyboard has been working fine but I've been having problems with the mouse.. I read about the Bluetooth Module and the BT,1,2,3 wires inside the mac pro and the possibility of a wire being labeled wrong. Unless the module is on the back of the motherboard, I haven't seen any wire that says BT. If the tray where the ram slots are is removed there 2 tiny wires in the lower left that says 1 and 3. No other connector for BT so I don't think thats the location. Where is this Bluetooth Module located? If I cant get this to work correctly whats the best dongle to get?
- two with double USB wire - one with only one USB wire
My MacBooks (Pro 13 and 13 white) don't see the drives with double USB wires. Both MacBooks work perfectly fine with the drive with one wire and my windows machine works with all 3 external drives without any problems.
I have a 2005 G5 and my Bottom bay HD wires are busted. I need to obviously buy new ones but the problem is I can't figure out where the wires go, I can find the smaller wire, but not the bigger power wire (i think its the power). When I open up the G5 it looks like the big wire goes behind the board (and I really dont want to take the whole thing apart!). Does anyone have a picture explaining where all the wires go in a 2005 G5. I have goggled it, but just internal pics and simple explanations come up, I am looking for something more complicated so I know where the bottom bay wires go to.If anyone has switched out the wires before please let me know, cause this is nuts. They make everything else in the G5 easy to do but this. ( This all happened because I shipped it and the wires snapped on my bottom drive)
I have a MacBook which I purchased in Feb 2007. It gets light daily use.
Over Christmas holidays in Dec 08, while attending a weeklong family reunion, the laptop was in use almost constantly by various family members. On the drive home, our daughter had the MacBook plugged into the power source in our minivan so she could watch a DVD. She noticed a scorching smell, and realized the plug at the computer end was smoking! That's when we noticed a series of small holes or tears around the plastic coating of the power cord where it attaches to the plug (just below the thicker sheath). The wires inside were twisted together and had shorted out.
We went to an Apple store and purchased a new cord. It cost $120!!!
While my MacBook is no longer on warranty and I do not have AppleCare, I want to contacting Apple about this. I am wondering if other people have encountered this problem. I notice that the new power cord has a longer plastic sheath between the plug and the cord; it is twice as long as the one on my old cord.
I just got my wife a MacBook Pro and we are already confused. [YES, WE JUST SWITCHED]
Here is the first issue. It seems that the concept of closing and switching between applications is totally different on a Mac (willing to learn, just totally confused).
I understand from reading a few websites that the only way to actually close an application is to go to file->Close or Command Q... Is this true? I'm OK with keyboard shortcuts but my wife hates them and the extra steps of having to go up top, drop down a menu, and select quit seems kind of silly. What is the difference between the X and the - up top then anyways?
Also (and more importantly), we keep losing windows. For example, we had the Mail application open and started a new message which opened a new window. She then went back to Safari to get a contact. When she went back to the Mail application we landed back on the inbox and the new message window was nowhere to be found. We had to close each window one by one until we found the new message window hiding behind them. There has to be a better way then that .... right?
insight you guys can give me would be great. I'm excited to learn the ways of the Mac and there are a lot of things I like... but sometimes it seems like things are more difficult than they need to be just to be different than a PC (like the X not closing the app).
Yesterday I created a bootcamp partition and installed Windows 7 64bit (only for gaming).
After the installation Win7 had already identified all the hardware, except the Bluetooth adapter (but i seen the drivers in the Windows Update) and the video driver (same as the bluetooth).
Then I put in my OSX DVD and installed "bootcamp software". It installed various drivers (chipset, video, bt etc.).
Now my question is: are this the correct method or maybe is better install only the missing drivers, after a clean OS install?
Because now I can't uninstall ATI drivers (the are 10.7 rev.), I have not the CCC (for adjusting some setting, i.e. forcing v-sysnc) etc.
is there a way to switch network settings automatically because of whether or not I am connected to a certain (non-WiFi) LAN? I have to manually set the IP address and such when I am at work, but would like to have DHCP at all other times. The Location Managers I found can do this only on the basis on whether or not certain WiFi networks are found. However, there is no WiFi at work - so I am looking for a program that detects this specific LAN as soon as I plug in the ethernet cable and then sets a specific location. And vice versa: if I unplug the cable, I want to return to the other location...
I'm trying to figure out how does the cooling system in MBP's work. I've been using FanControl for quite a while (the one by Lobotomo), it does the job pretty straightforward - just dynamically changes the fan speed. But when I was using default settings the fans were at low speed even when temp was around 80C. Any idea what default settings for Apple notebooks are? I mean, lower and upper thresholds, how and when does it kick in the fans etc.
In Mavericks, I get these annoying pop-ups every day that say “Updates Available”. In previous versions of the Mac OS there was an easy way to see what these updates are BEFORE installing, (sometimes I don't want an update).
How can I turn off this update pop-up? How can I find out what the update is prior to the installation?
The little (X) in the lower left screen that you use to click on to manage your widgets is not opening up. I have widgets in the folder (library) but the widgets manager is not there. How can it be restored or downloaded from somewhere?
Info: MacBook Pro, Mac OS X (10.7.3), I love all my Macs
how to properly manage my music? I need to understand where i can and can not delete the music and what folder(s) i can find my music to backup. I believe i have about three copies of songs all over my mac book pro
My wife's 2011 iPhoto album is 72GB! Most of this was 720p iPhone 4 video, in 2012 she has a 4s. Is there a good way (Automator perhaps) to import photos into iPhoto but only link video and keep them stored on a NAS? I can archive previous years videos in other iPhoto libraries, but would like to come up with a solution where the last 18 months video takes up less than 30GB so a MacBook Air would be feasible.
I think there is something wrong with the apple website as it won't let me manage my a/c properley and emails sent to me to reset my password have not reached me.
Info: MacBook Pro, Mac OS X (10.6.8), Iphoto 11- v 9.1.5
I would prefer the backup to run when I am not working on the computer (instead of every hour). Can the Time Machine Scheduler be trusted or is there another option to manage the backup schedule?
I use to have about 20 tabs open all the time, but this is not the case in c2d cpu, I think.
So, when so many things (osx, addons versions, ff versions) changes, I really do not know what else to search for, in order to make my firefox have a normal cpu usage.
After a hd failure and complete system restore, I am unable to manage my bookmarks. I'm using iCloud and I have tried turning off bookmarks in all devices as well as other procedures outlined here including resetting safari.
I am currently managing 20 iPads on a macbook. I would like to manage the same 20 iPads on a new macbook pro. I have logged into the iTunes account on the new machine and see our apps but not the devices. How do i get the devices to be shown on new comp?
My wife and me have separate Apple ID's and one lap top at home. We have synced our data on the lap top and now face a situation where in her contacts are on my contact list on the phone and vice versa.
Over the years, I have amassed GBs worth of music, spread over many different iTunes libraries, as a result of having desktops, laptops, replacement machines etc. When I first started my collection, I stupidly "let iTunes manage my library" which has resulted in all my tracks being put into thousands of different folders because iTunes likes to create a separate folder for each artist. I was wondering if there was any way of exporting all my music in the iTunes database to a new location, organized by album. eg. A State of Trance 2010 Yearmix being exported to a folder called that, not each of the 80 tracks going into a separate artist folder.
If this can be done, I'm hoping to consolidate my music collection into one library, once and for all! It's probably worth noting that I'm now on Windows, but I thought I would ask here as iTunes is an Apple product. I have access to a Mac should I need to do anything "Mac-specific" to make this happen. Tune up looks like a promising piece of software. However, it only seems to clean up the music files themselves, not their organization within my music folder. Does anyone have any experience with it? Sorted! I'm sure there are loads of people out there that would like me reorganize the file structure of their music after iTunes obliterates it...so here's what I did.
1) Downloaded Songbird. What a great application! It has addons! 2) Went into the applications options. (Tools >> Options) 3) Selected the 'Manage Files' tab. 4) Ticked the box to 'Allow Songbird to manage files'. In the 'Structure Folders' section underneath I changed it to 'Album/Song Files'. 5) Clicked OK at the bottom to save changes and Songbird then wizzed through my collection and put all my music into Album folders! 6) Uninstall iTunes.
i'm sure there are many people who use spare batteries like me. but how do you manage them though? i find it very annoying having to charge them one by one. charging 1 battery takes a few hours, which is almost fine. but when you have a spare battery, it takes twice as much longer to charge them both. not fun. a separate battery charger will help greatly reducing charging time
First one was a portable 500gb freeagent, and also I put it in a folder in my 1.5tb time machine drive. Tonight I am updating the second, and I think I'm noticing a problem, but not sure. First of all, when I move my library locatation in preferences to the ext. drive in preferences, and do consolidate library the "info" on a few of the songs still shows a filepath leading to the built in hard drive on my mac (the original library). Also, when I perform the Library>consolidate library function it seems like it copies all of the files that are already on the drive, too. So they only appear in itunes once but they appear in the actual folder more than once, in appended form. Anyone else think this is unnormal. How do you manage a library on mulitple drives? The original reason I did this was to clear some space on my macbook's hard drive, but I'm always too scared to delete the files on it.
I know this has not been possible in earlier versions of iTunes, but I hope Apple has addressed it by now. It makes a great deal of sense. If, for example, one has a song in the album in which it was originally released and also has a copy as part of a Greatest Hits album, we should not have to retain two copies of the song to be able to hear it no matter which album we choose to play. Aperture and iPhoto seem to manage this with images - why not in iTunes? Is it possible to do this yet?
I'm looking out there for a good business management program that will help manage contacts, appointments, invoices, etc.. I have tried a few programs, but none of them have been that great.