Ok hope I am clear about this. I just got this little thing and works perfectly in my Mac Book windows and osx. I am trying to figure out why my MacPro OsX is not displaying but would display in Mac Pro bootcamp Windows XP. I tested different means but it would not indicate anything in the screen. Does anyone have any idea to this problem? I know its not the unit as it works with other computers but its something with Mac Pro OSX.
EVGA is proud to announce the highest performing graphics card for the Mac today; the EVGA GTX 285 Mac Edition! With 1GB of DDR3 memory and 240 processing cores, your performance is maximized with graphics-intensive applications like 3D gaming, motion graphics, 3D modeling, rendering and animation. Take full advantage of the performance using NVIDIA CUDA and OpenGL applications. Upgrade your Mac Pro system with the EVGA GTX 285 Mac Edition today for extreme performance!
This has probably already been asked before, but I can't find if it supports the 2006 Mac Pro models? Wait nevermind. It says that it supports 2008 and 2009 on Apple's website. Darn! I wonder if it will work anyway? If someone tries it please let me know.
After about a year and a half, my EVGA 8800gt has gone bad, screen corruption, and eventual freezes, etc. and no problems with the original 7300gt in the machine. The part number on it is 512-P3-N801-AR, and it was used in a launch (1,1) mac pro.
Not a problem, the card has a lifetime warranty, my only concern is if I get a different card back from them. I have in the past, and just recently had a friend, perform a exchange with EVGA and had them send back a different card than was sent (it's always been a better card so no complaints at the time), but of course that would be an issue with the EFI32 firmware, etc. So if they end up being unable to send me another 8800gt which ones would be ok? I've read a bit about 9800gts flashed with the 8800 software working, etc.
I have a 7300gt in slot 3 at 4x and my 295gtx is in slot 1 at 16x. I'm on Snow Leopard, so didn't need drivers. I have two monitors, and I have my primary display on the 295 and the secondary on the 7300, which seems to boot just fine.
Just recieved my Mac pro last week and was waiting on whats going to be updated in the new Mac pros and after yesterday I just decided I wanted a Evga NVIDIA GeForce GTX 285 but now that I want one it's hard to find one. Apple has 1 to 2 months before it's shipped and I checked ebay just not having much luck finding one.There's 1 Company I found that said they have 1 in stock just not sure if it's a ploy to make me order and try to sell me something else. I thought I would post in here maybe someone here knows where I can still pick one of these up.
I have been looking into solutions to have two external monitors hooked up to my mbpro and found these two. Both get the job done, but with a huge difference in price. I was wondering if anyone has experience using both? The matrox seems better, but I think the eVGA will do well enough for what I will be using it for (light photoshopping).
I have an early 2008 Mac Pro with an EVGA 8800 GT installed. When I bought the computer the EVGA 8800 GT was almost silent even when under max load.
Now 15 months later the EVGA 8800 GT fan is making so much high pitch noise under load that I try not to use it for heavy 3d. The noises started after about 6 months after purchasing.
Monitoring the fan speed under Rivatuner shows that it goes to 100% performance under almost any load in order to keep it at a steady 80 degrees celcius.
I concluded that the fan was becomming less efficient over time and that it had to spin more and more in order to keep the temperature down.
Dust Cleaning
I try to clean the computer for dust every 4 month, blowing air backwards into the components of the computer to remove all the dust.
I normally use my mouth (trying not to spit) and a hairdryer. This seem to work okay for the most part, but not much for the EVGA 8800 GT.
After cleaning the fan is still quite audible and hovers at 85-90% under loading producing the annoying high pitch noise.
After only a few weeks its back at 100% under load. I tryed getting Apple to replace the video card, but they refuse to since it is still working. ( I hate this kind of deffinitions. )
- Would buying a can of compressed air and blowing it backwards into the EVGA 8800 GT remove more dust than the method I normally use?
- Would anyone recommend taking of the fan in order to clean it better or should the can clean enough? - trying to compare the risk of not being able to assemble the card again.
- Has anyone had any luck reducing the high pitch noise of the EVGA 8800 GT fan, and if so how?
Aftermarket Cooling
I did buy an aftermarket cooling system called Accelero S2 without the turbo module (fan) which recieves top reviews.
Despite having build some computers in the past I am a bit reluctant to install it by removing the fan completely because I am affraid that I will somehow break the video card in the process or accidently install it in a way that fries it when temperature rises under heavy load.
It sure is tempting to try the Accelero S2, but with the EVGA 8800 GT Mac going out of market I would have to dig deep in my pockets to get a replacement if something happends to the video card.
I think I also read somewhere that the instant you take of the EVGA 8800 GT fan you cannot put it back again. Which also makes me a bit nervous if the aftermarket cooler is not able to keep the card cool.
- Has anyone had luck installing the Accelero S2 without the turbo module (fan) and if so is it easy?
- Would anyone recommend installing the Accelero S2 without the turbo module? - I am not familiar with the success rate of aftermarket cooling and how skilled you need to be to be successfull.
- Has anyone had any problems not being able to keep the video card cool with the Accelero S2 and in that case was force to reinstall the default fan again?
I really wish I could reduce the noise of the fan so I can stand using it for 3d heavy stuff again.
Plan on ordering the following card from NewEgg later on today, as I can't find a retailer online that will sell an 8800GT and let me return it if something goes wrong.
Ok, here we go about dual monitors. First and foremost I know that the Matrox is available but I haven't found a source that stated for MBP unibody 17" will it work properly. Even if it does, the price for it is expensive!
Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info: MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
I'm yet to figure out a pattern, but my Macbook Pro's keyboard will just stop working for several minutes at a time at random points in time...Even if I hit caps or num lock, they don't turn green. Sometimes it'll just happen once every few hours, but I was in class the other day and it would work for a minute, then not work for a few, than work for another minute, etc.
F3 and my right shift key have suddenly become play/pause keys in addition to their original functions. My F8 doesn't really do anything anymore and does not even light up in Keyboard View. I've tried to use Sizzling Keys, and reset Keyboard Shortcuts but the problem still persists. It seems to affect most music playing programs (iTunes and Vox. I have a Macbook Model 5,2 and Mac OS X 10.5.8
during SW to my mini-mac wireless key board the keyboard stop responding. now i have left without an ability to work with my wireless keyboard. is there any why to reset the keyboard to default setting so it will come to live again..
I recently spilled a protein shake over my mb pro. It spilled on the right side, but I quickly cleaned it with a wet tissue and dried it up. The problem, now, is that the illuminated keyboard isn't working..only a few random keys are working and the rest aren't..
What should I do? I have a 1 year warranty left, but I'm not sure it'll be covered.
I've noticed that occasionally my IR sensor stops working, and no longer responds to changing the volume, skipping the track in iTunes, etc. It can be resolved by going into Security prefs, disabling and re-enabling the IR sensor. This is annoying, however, and I'm wondering if it's a known issue that might be fixed.
I noticed that when you disable and re-enable the IR sensor, the last few remote button pushes you made while it was broken come through in a burst.
My Late 09 MacBook Air has been working a treat, not a spot of bother. All of a sudden, about 5 minutes ago, I've gone to go online to download some research papers (I'm *trying* to write an essay) and it won't load anything. Not even my Twitter app. It is connected to the right network, which is working absolutely fine on every other device in the house (windows computers, iphone etc). I've turned it off and on twice, the way that us clueless folk do.. now I don't know what to do.
Ok, so I went to the apple support webpage and did all the junk they told me to do, but my might mouse still won't scroll down. It scrolls left, right, and up just fine, but for some reason it won't scroll down. The ball moves fine when i'm trying to scroll down, but, again, nothing happens...anyone have any suggests??? and Yes, i've cleaned it and haven't done anything to it and I can't think of anything I could have done to cause this...
I have tried a few thinsgs to try and get it to work including reseating the cables and that has not helped. As the title says, the back light works as i can see the screen getting blacker/greyer. Also the external output works as well. I'm not sure what to do at this point because I can't find information on an inverter board for the LCD, only the LED backlight think this could be an issue with the video card 8600M or is my LCD dead and I need a new one?
On a side note I have taken very good care of this computer, no drops, making sure the HDD is parked before moving, having it in a protective case, etc. The only difference is that I gave this to my sister to use and after a few days it died. (seems everything she gets that's electronic dies these days, meaning I probably shouldn't give her anything that has a circuit board in it....)
I have recently purchased a cricual m4 256 gb ssd for my MBP mid 09 15''.i have installed lion, on it is have reset the ram, enabled trim (also disabled trail an error), sms and so on apprently it is not working.Most of the time i experience beachballs and lags for 30 sec to 1 min. i find it very fustrating, so i unplugged the ssd and plugged it to my mac with a usb. it is now working fluent but not as fast as it could but with 36 mb/s in writing speed and read speed. compared to 10-15 mb/s before. i am aware that it should perform a lot faster. what is wrong? i know it is not the ssd.
Info: MacBook Pro, Mac OS X (10.7.4), 2,53 Ghz 8 gb ram.
I am using OS X 10.3. The apple menu doesn't work (for the past few months). When I click on it it's highlighted but doesn't pull down. I can not quit applications even if I use keyboard shortcuts (I have to force quit).
I tried starting with "safe boot" and I ran "Verify & repair disk permissions" but it didn't fix it. Any ideas?
I have been connecting wirelessly to the same router for about 4 months now, using DHCP, and having the settings on the automatic connection. I left the computer on, but closed, so sleeping, for about two days. When i opened it, the battery did not yet run out but the internet has not connected since.
I have full connection in internet connect to my network. Status says connected. If I have the IPv4 using DHCP, the status says that i am connected but my computer have a self-assigned IP adress. When I put in the IP manually, the Network setting give me a green light on airport and says that I am connected to the network thru airport. Needless to say, no browsers (Firefox, Safari, Netscape, or Internet Explorer) have been able to connect to the internet.
I have tried running Disk Utility for any errors, but there have been no changes.
Powerbook G4 1.67 GHz PowerPC 512 DDR SDRAM v. 10.4.11
I installed 10.5.7 yesterday. Immediately after the installation was complete, my Apple bluetooth keyboard stopped working. Went into Bluetooth system settings, and it said that there was no bluetooth hardware found... (it's built into the machine!!)...
Also, every time I start iTunes, it gives some weird error about Adobe Flash player. I'm not at home now so I don't have the exact wording of the error with me, sorry...
My headphone jack was working just fine until this morning when I opened my computer. It's plugged in, but the sound keeps going through the head speakers. I have done the system preference check to make sure it is not muted.
I have an 8 month old MB, 2.4 Ghz, 4GB Ram, 160 GB HD, running 10.5.5. I normally do the updated from Apple when the updates come out.
Anyway, I was trying to reformat/erase an external hd; I didn't see the Disk Utility icon on my Dock. I had used Disk Utility before (last time was maybe a month or two ago).
Go into applications, see something called disk utility, but it has a different logo (a piece of paper with a pencil, brush and ruler in the shape of an A). I click on it, it jumps once and does nothing. I figure it needs to be reinstalled, but the DVD that came with the computer says I can't install OS X on this computer.
I tried plugging in a USB 4Gig Stick into the front of the Mac Pro and the back but the computer doesn't seem to recognize it. It works fine if I use the usb stick on my MacBook thou.
I used TechTool Deluxe Software to scan for issues and it says, "Passed."
