I currently have Apple shipped PIONEER DVD-RW DVR-112D. This optical drive does not open due to mechanical failure. I need to replace. Please recommend compatible replacement drive.
Info:
MacPro1,1, Mac OS X (10.6.8)
I have a Power Mac G4 AGP Machine and if there are any sound cards with an optical out that is compatible with my machine.
View 1 Replies View RelatedWe have i-Mac 20" with built in i-sight Power PC, one of last ones I think before the intel. We have had a few problems before with it powering down and going to sleep. Used to hoover dust out and that seemed to fix it.
Now it won't start at all. I have tried all the PRAM and various commands to re set various things but none of these work. We had a wireless keyboard and I have just tried a wired one but I do not think either are connecting as the tab key light does not come on, which it does when I tested the wired on on my lap top.
When it died it crashed with a cd in drive. I have removed this and replaced it with the mac install disk to try and run the disk check but the optical drive is not starting at all either.
All that happens on start up is the sleep light comes on, then after a few moments fan starts to whirl. I can't hear the hard drive - have tried to rock hard drive to get it to spin but nothing.
Just wondering whether worth trying to replace optical drive or is this being controlled by hard drive - hence its not working nor hard drive. is there any way to recover data if it is the hard drive that is dead? anything else I can try and replace to fix it? could I use an external optical drive connected via USB to start?
I have tried to firewire but not joy their either!
I just bought a new Mac Pro 6-core and an OWC 120Gb SSD drive. My question is putting the SSD on optical drive bay or Hard disk drive bay, is there any difference in performance? My understanding from my old PC is never to share the SATA cable with the optical drive as it will take the transfer speed of the optical drive, because they are running in the same "channel"?Is the 2 SATA cable in the optical drive bay 2 separate distinct ports/channel?
View 6 Replies View RelatedI am wondering if anyone knows where I can get the screws that go in the side of the hard drive and the standoffs (screws) for the bottom of the optical drive for a Power Mac G5.
The hard drive needs screws so it will slide into and sit in the case properly.
I bought a Pioneer DVD drive to replace the original Sony SuperDrive. Apparently, there are different sized standoffs for Pioneer and Sony drives. With the Sony standoffs on the Pioneer drive, the tray scrapes the case when it ejects.
I did a search but couldn't find any specific info as related to the 20" (late 2006) iMac. Basically, I do a lot of audio work with Logic and DP and I'm interested in replacing my 20" iMac's optical drive with a second internal hard drive. If anyone has any experience or insight regarding this, I would greatly appreciate your input. About 6 months ago, I did a DIY replacement of my iMac's internal hard drive (upgrade to 1 tb), so I'm pretty sure I'd like to DIY an optical drive / hard drive swap - that is, if it's 1) Proven to work stably (thermally and otherwise) 2) Not going to require the iMac's fan to be running faster/louder than normal Looking at my iMac's system profiler, the DVD drive is on an ATA bus (which, as I remember it, is slower than S-ATA). What kind of transfer rates do you think one could realistically expect with a hard drive on this ATA bus? Also, would I have to be careful about new hard drive compatibility, or are S-ATA and S-ATA II backwards compatible with ATA?
View 1 Replies View RelatedMy slot leading super drive has just quit ejecting the cd inside. I tried 5 different ways to eject it but none work.
Info:
MacBook Pro (13-inch Mid 2010), iOS 7.1
I was thinking of removing my DVD Superdrive and adding a SSD drive. Will I be able to put the DVD drive in an enclosure and use it as an external drive?
View 5 Replies View RelatedI read this somewhere but i cant seem to find it anywhere on google.
View 4 Replies View RelatedI recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX). I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject).
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile).
I tried a few things I read in the community using various Terminal commands but was unsuccessful.
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)
Info:
Mac Pro, Mac OS X (10.5.8)
So I have a Macbook (late 2008 model), and the optical drive essentially went bye bye. If I put a disc in, it will have trouble recognizing it and then it will eject out. Anyways, last night, I did some maintenance on OnyX and it said that my volume needs to be repaired. Even Disc Utility failed to finish and said that the "filesystem verify or repair failed."
The short of it, I need to put the Leopard disc in there and do a disc repair. However, is there a way, via firewire, where I could actually use my iMac's optical disc drive in place of the Macbook and connect via firewire, then do the disc repair? If so, what would be the specific way to do this?
I recently purchased a Mac Pro and am breaking down my old Windows Xp replacement that this is replacing. I kept the nicest of the two DVD Rewritable drives I had in it.
I want to put this as a second drive in the Mac Pro. My question, I got drive replacement information off of Apple's web site but this is an addition, not a replacement.
This information should still help me a lot but most of all, how do I set the connector in the back? Do I put it to slave/primary, or cable select?
Is there anything else I have to do such as when I boot up the Mac Pro or will it simply just recognize it?
I have the Pioneer DVR-112D in my Mac Pro Classic, and I'm a little irritated that it won't burn DL-DVDs at any higher than 2x.
I recently did a crossflash with DVRFlash to update the firmware on the drive hoping that doing so would improve DL-DVD write speeds. No dice.
SO... I am looking for a newer, better, faster optical drive.
I know it needs to be ATA to work in my antique mac pro.
Does it need to be some kind of mac specific drive? Can you give me any recommendations?
Since I have no plans to add a second Optical Drive to my Mac Pro in the Second Optical Drive bay, I was wondering if I could put an SSD in that bay using a 2.5' to 3.5" drive carriage. Is this possible? Would it work? Would I be able to use it as my boot drive? Never tried this, so not sure if it would work.
Info:
Mac Pro, Mac OS X (10.7.3), Quad-Core 2010 Model
Just bought a mid-2012 MacPro. Also purchased a Crucial 512GB SSD drive, which I intend to use for a boot drive. I know that I can install the drive in one of the four slide out drive bays. From what I can gather, it doesn't matter which bay I use, Mac will boot equally well from any of them. My question is: What about the second optical bay? Is there any advantage to putting the SSD there? (other than keeping another slot open for HDD?) Have tried to research this a bit, but the model is brand-new, not a lot of info out there..
Info:
Mac Pro (Mid 2012), Mac OS X (10.7)
Can a SSD in an optical drive slot be a boot drive in a 2010 mac pro.
I'm debating getting a 2010 mac pro (probably 3.2 quad) to upgrade from my 1,1 mac pro. I'd like a SSD for apps, and to boot from. But I'd also like the four bays to raid for larger capacity. I have tons of photos, and nearly a 2GB iTunes library.
after I get a bad burn (it's very rare, but it does happen), I get a stuck DVD. I can't open the DVD tray unless I either restart the computer or wait a &$?# long time before it gets done trying to read an unreadable DVD. Even the terminal won't allow me to open it. Is there a way to get the DVD tray opened "immediately"? Sucks to think that we don't have control over that.
View 14 Replies View RelatedOk, so I've got a Philips DVD R/RW drive and I want to put it in my Mac Pro. I put it in, hooked everything up, but it won't open for me (opt. + Eject, I know). It's set on cable select, but I've also tried it on slave with the stock on master. Anyone have any ideas? I'd like to get this working as soon as I can.
PS, when I wake the MP from sleep, the light on the second drive blinks, but nothing else.
i added a newer dvd-r drive today and used the original one as a back up when i press the eject button, the top one opens. how do i access the 2nd optical drive?
View 3 Replies View RelatedI have a MacbookPro. The factory fitted DVD/CD drive plays dvds fine but spits out CDs [even originals]. I have Windows XP installed via bootcamp which doesn't cause me any problems.
View 6 Replies View RelatedI have a 2 * 2.8ghz quad Mac Pro
I have dvds from Region 1 but my daughter has sent me some work of hers from the Uk. I only have 5 times to change the region and therefore my question is should i buy a 2nd optical drive and use that for region 2 and the original for region 1.
I have just installed a 2nd Optical drive in my MP I have a 2 X 2.8 Quad Core Intel Xeon model and have attempted to add a Samsung 22X Pata Internal DVDRW [URL] It is not showing in profiler and it doesnt show on the eject icon. When my mac pro powers up the drive lights up but doesnt register. I took the front bezel off but do i need to do anything else ?
View 8 Replies View Related[URL] recommends installing SSD in the 2nd optical bay drive right below the SuperDrive without need to secure (mount/screw it in) it. Read a review by Wavy Dave on Amazon and he doesn't recommend installing SSD in the optical bay even though it has a SATA connector because it's not a "primary" SATA connector. Is that true, our optical bay SATA connector is not primary?? I currently have all 4 bays filled with HDDs so would rather install the X-25M 160 GB below the SuperDrive.
View 9 Replies View RelatedIs there a way I can rip a disc and watch a movie at the same time?
When I try, it either
1) doesnt work
2) when I try VLC, it slows my system to a crawl (beachball)
Anyone ever get around this issue?
What is the BEST optical drive that a PowerMac G5 can support?
View 2 Replies View RelatedI installed my Pioneer Bluray drive in the second optical bay on my Mac Pro 2010. It works fine but when computer has been on for a little while it has lost connection with the drive entirely. I'm not sure when exactly. I mostly notice it when I try to open the tray and get no response. When i check in Toast, the app freezes due to the faulty connection and when checking for it on the computer info it's not there anymore. Anyone know why this is? One possibility I can imagine is a sleep/wake issue where this connection is somehow lost, but I never put the computer to sleep so this can't be it. I would hate to remove the Bluray drive entirely, but maybe I can switch places?
View 1 Replies View RelatedOk so i have an early 2008 Mac Pro, that has been reformatted couple days ago. So when i install my softwares again and i realized some of the DVDs can't be read anymore, the drive just makes a certain sound every 5 secs or so and eventually it just ejects by itself. Now the weird part and the thing i just don't get is why it's only like that for certain DVDs.
For example, i was installing Ableton Suite 8 again, and there are 4 discs. For some reason disc 2-4 work but the Disc 1 doesn't read at all. And i know it's not a problem with the DVDs cause they work on my macbook pro and even my PC. And i tried to burn a copy of that disc 1 into a blank DVD and tried to run that to install and it worked, so it can't be any data issues or whatever with the DVD.
Is this a firmware issue? if so how do i fix this? I thought at first it could just be because i reformatted my mac recently and then this all happened. But i've reformatted my mac several times before and never had this problem. Or this is optical drive just laming out and its time to buy a new one?
But then again why does it work for some DVDs and not for others? It's just BUGGING me ALL DAY.
oh and the drive model is:
Sony NEC optiarc AD-7170A
Are there any specifics I should know about the second drive bay? I'm planning on buying just a really fast CD-ROM drive to put in there - can I get any ole' one? I noticed that the Apple drive does not have a faceplate - does this mean I have to remove the faceplate from whatever drive I get? Are there drives available that already have no faceplate?
I never used Mac OS X with more than one optical drive - how does opening a drive work? Does the eject button open both drives? One at a time?
Looking at blu-ray drives, I thought of an interesting question, and I just wanted to know if anyone knows the answer...why was an older standard used for the MacPro's optical bays, especially when the HDs use SATA? And I know the motherboard has sata ports, so that's not my issue. It's just kind of a pain having to use an adapter or run a cable to the motherboard if I want to use a sata blu-ray drive for example.
View 23 Replies View RelatedMy last Powermac G5 I put in the 20x dual layer Pioneer. 116d I think is the model number. Works perfect. Should I get that same drive or should I get the Pioneer one that has the 20x dual layer plus Lightscribe? I heard the Lightscribe one is basically an Asus drive and don't know if that is good or bad. Does anyone use Lightscribe?
View 5 Replies View Related