Windows On Mac :: Booting Win7 Or XP Directly From Removable Ext HD
Dec 21, 2010
Whether it is possible have a harddisk installed with Windows (say, Windows 7 or XP) and use it to boot directly on a Mac? That means, a single external removable harddisk installed with Windows which can be booted on both PC and a Mac. Is it possible to simply take a Windows installed harddrive and boot it on the Mac? And after using it on the Mac, the same Windows harddrive can be booted on a PC again?
I do understand that Parallels has Transporter, but what I do know is that it is some sort of "migration". Once "migrated", the Windows cannot be booted on a PC again. Am I right? (So, this solution won't work.) My scenario is that I use a Mac at home, but I need to boot into Windows to do some office work (of course, using my Mac). This Windows on an external harddrive must also be bootable on a PC whenever I bring to work in my office.
View 2 Replies
ADVERTISEMENT
Mar 3, 2010
There are two tools I've found that will let you reboot into Windows straight out of Mac OS X, without having to change your startup disk or hold down the option button at boot:
Flipside: [URL]
Quickboot: [URL]
I'm running OS X 10.6.2 and Windows 7. Neither of these works for me. When I try to reboot into Win7 using Quickboot, my unibody Macbook Pro just does a regular reboot and I land right back in OS X. Flipside does not even list my Bootcamp partition after its initial scan. When I select the Bootcamp partition manually using Flipside's "manual mode", I get this message: "Unable to set that volume as a startup volume. See the log for more info."
I did install Win7 *before* Apple announced official Bootcamp support for Windows 7. I don't know if that has anything to do with it, but there it is. Also, when booting into Windows, do any of you get that black screen with the blinking underscore in the top left corner that just blinks around for a good 20 seconds or so before actually commencing to boot Windows? I always wonder what the hell the point of that screen is other than to make me wait..
View 6 Replies
View Related
Mar 1, 2009
I have MacBookPro Unibody 2.53 ghz 15" 4GB and 320 GB
-Partitioned it with bootcamp assistant to Mac(220gb) and Windows(100gb)
-loaded Windows vista on bootcamp partition
-Installed VMWare fusion to use windows vista from bootcamp partition
-All my docs pics are in mac partition
-With vmware i can access files from windows and mac but when i need to boot directly into windows i should be able to use the docs and pics from the mac partition directly.. (eg i am using picasa to arrange my pics i should be able to get the pics folder mapped in windows somehow.
View 3 Replies
View Related
Jan 10, 2009
seem to have a problem booting from my install DVDs of either Vista or Win 7 64-but editions on my MBP (santa rosa era I believe). Basically when I attempt to boot instead of getting the usual 'Press any key to boot from DVD' message, I get a menu appears like the following....
1:
2:
Please select CD-ROM boot type:_
And it just sticks on there, keyboard doesn't respond at all and probably wouldn't do anything useful anyway since both options are completely blank so I have no idea what it is asking me to do. My Vista disc is a genuine original, my Win 7 disc is burned from the latest MS Public Beta, both do exactly the same thing.
View 23 Replies
View Related
Dec 2, 2009
I'm really new to OS X and macs in general. I just got the new macbook and I have Win7 professional 32bit on a dvd(legal). I have created a partition in bootcamp but every time it tries to boot from the dvd a black screen comes up with a flashing white cursor and thats it. Can anyone help me please as i really need win7 soon for college assignments.
View 2 Replies
View Related
Nov 5, 2009
I am not using any raid at all on my 2008 mac pro. All I want to do is achieve using SATA drives via the ODD ports on my logic board to boot windows. I know it can be done. In case you don't believe me, here is the PROOF that shows I have installed the AHCI drivers successfully in windows: Under IDE ATA/ATAPI controllers, the following exists:
Intel(R) 631xESB6321ESB/3100 Chipset Serial ATA Storage Controller, and underneath that says the following:
Intel(R) ESB2 SATA AHCI Controller.
That said, the matrix control console identifies all my 6 ports correctly. But when I go and hook up my SATA bootcamp hard drive to the ODD_SATA Port on my board, it doesn't boot! Why?? I went through all that trouble to install AHCI drivers in bootcamp annd it doesn't boot up at all? Yes, I would like to boot windows via ODD_Ports, but each time I do this it doesn't seem to boot. I am afraid to use a SATA optical drive, as the same thing will happen again. However, it appears that when I am in bootcamp, all my drives are recognized and working.
What do I need to do to get the ODD_SATA ports to recognize the AHCI during boot up(not while in Bootcamp)? I don't understand why it won't boot, after installing the matrix storage drivers for AHCI? I am leaving you with my skype id so you can chat with me on what to do here. Psychomacuser343 is my skype, while nadav333 is my AIM. As I said, I have tried everything, and while the ODD_SATA ports boot on the mac side, Even with the AHCI drivers in bootcamp, can't get bootcamp booted unless I remove it from the ODD_SATA port. Also, I managed to install one sata cable and not needing to mod my case fan.
View 24 Replies
View Related
May 9, 2012
Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp? How would I do this?
Info:
MacBook, iOS 5.1
View 1 Replies
View Related
Oct 12, 2010
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
View 6 Replies
View Related
Aug 9, 2009
I wonder if there is anyway to do the following to make using the windows on my Mac even more easy and simple: I have vmware fusion (recent version) installed on my Mac and viewed under "Unity" so the Windows and Mac apps are all viewed on the Mac desktop. What I want to do is to be able to install windows apps ".exe" that are downloaded under Mac directly on windows with just double clicking on the file that is in the Mac platform while vmware is already launched or not yet. I tried some methods like opening files with "exe" extension directly by vmware but that won't work, I don't know what else to try.
View 2 Replies
View Related
Jun 25, 2014
Few days back I had installed Symantec PGP into Macbook Pro but now I don't remember it's password. So I want to reimage my Macbook Pro, but don't want to spend money on OS X.
So would I be able to install windows 7 or ubuntu by CD/bootable pendrive?
View 1 Replies
View Related
Dec 10, 2009
i am a new user of mac book pro..i tried to install windows xp (sp3) having partition of 60 GB in my mac hard drive ..then after restart it boots only winxp..not showing any part of Mac ox.
View 4 Replies
View Related
Jun 13, 2010
I opened up a partition a few weeks ago b/c I needed to use a windows program that I no longer need. I was getting tired of having to hold alt-option to choose my HD everytime I started, so I deleted the partition. Now, I still have to go through the same process everytime I power up, even though I only have the Mac HD - I have to hold down alt/option when I start up and then click on the Mac HD button. What do I do to make it go straight to Mac?
View 2 Replies
View Related
Oct 11, 2009
This only happens when I choose to boot into windows. The screen sort of hangs for about 20 seconds in a black screen with an underscore at the top left corner before even starting to boot into windows. I know its normal for this to happen for like 5 seconds tops, but this is happening for about 20 seconds and its dreadful trying to boot into Windows 7 because it takes so long. When windows is done starting up i don't even get any messages saying startup failed or something like that. This is so annoying that I even reinstalled everything but the same thing happened.
View 13 Replies
View Related
Jul 14, 2009
I have Windows Xp and Windows 7 on two different hard drives in my Mac Pro. Windows 7 had been working fine, but I needed XP to run some older programs that 7 couldn't do. I have been working in XP some time now but when I try to boot from the Windows 7 drive it just reverts to the XP one. Even when I click on the Windows 7 drive to make it the start up drive it still goes to XP. Is there something I'm doing wrong?
View 7 Replies
View Related
Nov 18, 2009
I have an external hard drive which I have successfully installed Windows XP SP3 onto. It was a long and painful process but I finally was able to get a modified XP install disc ready and from a Dell PC running Windows was able to install onto the external hard drive and I'm able to boot from it and everything. I did this on a PC because I couldn't for the life of me figure out how to boot correctly from an external drive in Mac.
Anyway, the hardest part is in the past and now my only problem is how to boot this external hard drive from my macbook, which is primarily what I want to use it on. I currently have a Macbook with three operating systems on it: Mac OS 10.5.8, Ubuntu Linux, and Windows XP SP3. I use rEFIt to boot into these operating systems. I tried using rEFIt to boot into XP on the external hard drive but it just gives me the legacy error messages saying that it couldn't load and noting the booting legacy os is not well supported by mac.
View 2 Replies
View Related
Dec 22, 2010
I currently have a MacBook Pro and I am trying to put Windows OS on it using the Boot Camp option. I can download Windows 7 using my university's website, but all instructions for installing Windows using Boot Camp require using a CD. Is it possible to do it with it downloaded on the desktop, or do I need to put it on a CD/DVD somehow and then use that? I'm not sure if I can put it on a CD (with the stipulations of the University share program).
View 1 Replies
View Related
Jan 24, 2009
What's so special about Windows 7? I hear a lot of people saying really good things about it and some even go as far to say its better than OS X. Now, I haven't actually used it, but the new taskbar just seems like its a blown up version of quick launch. You see pictures of what windows you have open instead of words. Big deal. I have to admit the whole dragging windows to the edge of the screen thing is sort of cool. But just that won't make most people upgrade. Its nice that it's not supposed to throw stupid security messages at your face all day, though. What's the huge difference between Vista and 7?
View 24 Replies
View Related
May 5, 2009
Well the rc1 for windows 7 was released today and I want to try it out on my Macbook Pro. Question is there's 2 versions I either download the 32 bit version or the 64 bit version. Which version do I need on my MacBook Pro?
View 4 Replies
View Related
May 18, 2009
I am trying to download Windows 7 but it just sits at that loading screen and won't go past.
View 2 Replies
View Related
Jun 7, 2009
Is RC reporting back to M$ about problems, errors, etc?
View 2 Replies
View Related
Sep 17, 2009
If I'm installing Win7 in a Parallels VM, is there really any reason to go with 64-bit? Is there any reason not to go with 64-bit if I'm using it in this manner?
View 2 Replies
View Related
Feb 16, 2010
Having just installed a fresh copy of Win7 (again) and getting a real good look at it, I find the file management to be utterly appalling compared to OSX. The control panel is a big mess with everything ordered hapazardly (why couldn't MS borrow from Apple's system preferences??). The Explorer is a joke. I want my directory hierarchies to expand in columnar format like it does in the finder. Also, when I drag files from one explorer window to another explorer window, the target explorer window should get the primary focus when I hover over it but it doesn't. I have to actually alt-tab my way to do that (in the non-sensical way Win7 does it). Start Menu and task bar just doesn't compare to the dock. Does anyone know of any enhancements to Win7 that can mimmick the behavior of OSX's finder, add a dock and any other important refinements to this rather bloated and badly designed OS?
View 5 Replies
View Related
Apr 12, 2010
I am leaning towards getting a 13" MBP when they come out (hopefully this tuesday) with the plan to solely (or mostly) run windows 7. I understand that there have been a number of issues in the past including keyboard backlight constantly on, sensitive trackpad, battery life issues, etc. It seems that a lot of these issues have been resolved via driver updates--is this the case? Has the trackpad issue been resolved? Overall, would you recommend getting a MBP to run windows?
View 20 Replies
View Related
May 22, 2010
I bought Windows 7 today (Premium version) and it came with both a 32-bit disc and a 64-bit disc. I'm just wondering if there are any real significant advantages to using the 64-bit version. The specs of my MBP are in my sig.
View 3 Replies
View Related
Jul 20, 2010
I just installed Windows 7 on my bootcamp partition. I have a macbook pro intel. Everything is loading fine, i ran the windows 7 update and all things are up to date. I now need to load my bootcamp drivers. I restored my Snow Leopard image file onto a portable HD. Double checked in osx and everything loaded fine.
Now, my problem is.. from Windows 7, when I plug in my usb hd, it does not load. Is there a reason why windows does not recognize the usb hd as a bootable install disc? When I am back in OSX and plug in the drive, it loads just fine. Anyone know if there is something I can do to get windows to boot the usb drive? The last resort I want to do is burn the image file to dvd.
View 6 Replies
View Related
Aug 26, 2010
I want to install bootcamp with using Win 7 but I have both 32 bit and 64 bit versions. Am I able to use 64 bit without problem or do I need to stay with the 32 bit version? I am using a iMac (early 2009 model) with 8 GB ram and ATI 4850 HD video 512 MB ram.
View 6 Replies
View Related
Sep 16, 2010
Is it possible to install Boot Camp 3.0 or higher on Windows 7 64-bit when dual booting with Leopard? What I've been reading suggests I need the Snow Leopard disc for Boot Camp 3.0+ and Windows 7 compatibility, but I only have the Leopard OEM disc.
View 8 Replies
View Related
Sep 26, 2010
I successfully installed Win7x64 on my 13" MBP. I got the drivers installed and everything updated. My USB mouse stopped working both in OSX and Win7. Anyone got any ideas? I researched online and I am running the latest bootcamp with the latest drivers. It's strange because prior to installing win7, my USB mouse was working fine on OSX. It's not the port. I tried sticking in a external hdd in both slots and both slots function.
View 3 Replies
View Related
Oct 7, 2010
For the last several months I've been running SolidWorks 2010 on a new MacBook Pro (Core i5 M 520 @ 2.40GHz) dual booting into XP. It's been running fine and outperforming my couple year old Dell Xeon Workstation by a few percent when benchmarked using Anna Wood's CPU intensive punch holder, averaging about 88. I decided to upgrade to Win 7, which I've been very happy with on the desktop and showed consistant performance with XP. However, I was very disappointed and confused to find that the Win 7 on the MacBook slowed down to 112 for the 32 bit install and 126 for x64. Test were run with consistant settings and on AC power. 've fiddled with the Windows settings to maximize performance. The windows experience scores, for whatever that's worth, are higher than the desktop. I'm a bit confused as to what's going on. Anyone have any thoughts or suggestions?
View 2 Replies
View Related
Dec 2, 2010
I've used my Windows 7 machine to make a USB bootable (command prompt, etc) using these instructions. [URL]. And I've copied all of the Win7 files off of the installation DVD on to the jumpdrive. I've prepared my Mac for installation by installed rEFIt and all the other instructions on the following tutorial: [URL]. So when I have my USB drive plugged in to my MBP and I start it up, holding down option to bring up rEFIt, the USB drive doesn't show up to begin installation.
View 2 Replies
View Related
