Mac Pro :: Win7 Drivers For 4870/GTX 285
Dec 19, 2009
I grabbed a new i7 iMac, and have found the Bootcamp drivers to be lacking, mainly causing display driver crashes. I just loaded up the newest from ATi, but its too soon, to tell if that fixes it. I'm considering returning the iMac and getting a Mac Pro instead. Just curious if this problem still persists on the Mac Pro or not in Windows 7. And if I get full driver access control, as you would with a typical PC? (I noticed that Catalyst Control Suite on the iMac doesn't install, it will only install the drivers, so no fine-tuning access the Control Suite typically affords you)
View 1 Replies
ADVERTISEMENT
Mar 24, 2009
I just got my Mac Pro today and I installed a 1 TB drive as my main drive, and i've noticed everything I do such as typing this question and moving windows around is extremly laggy.
Do you think it is becauese the install CDs that came with the Mac don't included the 10.5.7 custom driver for the 4870 card? I didn't erase the default 640 HD that came with the MP yet so i'm going to reboot using that drive and see if that changes anything.
View 24 Replies
View Related
Dec 28, 2009
I am new to Mac etc. I just installed Windows 7 Ultimate 64-Bit on my Macbook White latest edition with Snow Leopard 10.6.2 and Bootcamp. I run Windows 7 fine, but I want to install drivers from the OS X CD, but when I put it in the laptop, I get some weird messages as: Remote Install OS X - Install CD/DVD Sharing - It should be a bootcamp program that should show up, I've heard. I cannot get wireless network, etc.
View 1 Replies
View Related
Oct 31, 2009
I've tried looking all over and am totally confused with what works with what and how to do it. I am looking at installing windows 7 x64 on either the lower spec 13inch macbook pro, or the lower spec 21.5inch imac. Installing windows 7 itself is so easy, but how do i get the drivers installed and which work? I know I should use the bootcamp drivers for vista off of the OS X disk but is it as simple as inserting the disk, navigating to the folder and running whatever? And does everything work for both the systems I mentioned? Including sound etc., and if not, how do I get it to work.
View 5 Replies
View Related
May 4, 2010
Standard bootcamp drivers are quite old so I went to upgrade the drivers from nVidia.com; I noticed that nVidia doesn't support the 330M under its driver page, am I to assume the 330M is an Apple specific part? Will nVidia support the 330M in an upcoming release?
View 1 Replies
View Related
Jul 2, 2010
I have MacBook Pro 5.5 MacOsX Ver 10.6.4 with Windows 7 64 bit installed via Boot Camp. The instructions clearly indicate I need to update Mac Drivers for Windows. I have no idea where to install the drivers, on the Mac side or on the Windows side. I tried to install the driver updates for Windows 7 64 bit on the Mac side and when I clicked on the down load the preview window was garbage gobbi speak.
The only thing legible in English was at the top it said for Windows 32 bit. I clearly clicked twice on the download link for 64 bit. Before I go any further would someone be kind enough to direct me to the proper install for the drivers telling me which partition to do the updates, Win side or Mac side? I installed Win7 from a new install. This was not an upgrade disc. Also have Office 2010 installed.
View 9 Replies
View Related
Nov 7, 2010
I finally got my HDD partitioned and BootCamp Assistant to work correctly, I insert my Windows 7 disc, and it starts installation, but then stops and says it needs CD/DVD drive drivers, and to please insert floppy/usb/cd/etc. with the drivers. However, I can't eject the CD to insert my Snow Leopard disc and can't find the drivers poking through the SL CD to put on an external or flash drive.
View 2 Replies
View Related
Nov 19, 2010
I can't get VMWare to install their tools that supposedly helps with the Win7 drivers. However, i have the Win7 drivers for my MBA from a previous attempt to install Boot Camp. They are in my MBA dowload/drivers folder and on a USB thumb drive. But the VMWare install won't look at either. It only wants to look in 3 places.
A: floppy drive (haven't had one in many years)
CD drive D: VMWare tools (which is no help at all)
Boot X: drive
View 2 Replies
View Related
Nov 22, 2010
I haven't actually done this. I just want feedback. We have a 'universal' ghost image of Windows 7 at work that we've created that works with all our computers (has all the drivers for computers we support). I'm looking to piggyback that image and just add in the BootCamp drivers. However I'm curious to know:
-Which BootCamp drivers would I be adding to the sysprep drivers folder? BootCamp 3.0, 3.1 or 3.2?
-Would the drivers be enough or does Windows actually need the BootCamp software installed?
-If BootCamp needs to be installed in its entirety, is there a way to have BootCamp silently install upon boot? More importantly, is there a way to install BootCamp 3.2 without having to go through 3.0 -> 3.1 -> 3.2.
View 3 Replies
View Related
Nov 5, 2009
I am not using any raid at all on my 2008 mac pro. All I want to do is achieve using SATA drives via the ODD ports on my logic board to boot windows. I know it can be done. In case you don't believe me, here is the PROOF that shows I have installed the AHCI drivers successfully in windows: Under IDE ATA/ATAPI controllers, the following exists:
Intel(R) 631xESB6321ESB/3100 Chipset Serial ATA Storage Controller, and underneath that says the following:
Intel(R) ESB2 SATA AHCI Controller.
That said, the matrix control console identifies all my 6 ports correctly. But when I go and hook up my SATA bootcamp hard drive to the ODD_SATA Port on my board, it doesn't boot! Why?? I went through all that trouble to install AHCI drivers in bootcamp annd it doesn't boot up at all? Yes, I would like to boot windows via ODD_Ports, but each time I do this it doesn't seem to boot. I am afraid to use a SATA optical drive, as the same thing will happen again. However, it appears that when I am in bootcamp, all my drives are recognized and working.
What do I need to do to get the ODD_SATA ports to recognize the AHCI during boot up(not while in Bootcamp)? I don't understand why it won't boot, after installing the matrix storage drivers for AHCI? I am leaving you with my skype id so you can chat with me on what to do here. Psychomacuser343 is my skype, while nadav333 is my AIM. As I said, I have tried everything, and while the ODD_SATA ports boot on the mac side, Even with the AHCI drivers in bootcamp, can't get bootcamp booted unless I remove it from the ODD_SATA port. Also, I managed to install one sata cable and not needing to mod my case fan.
View 24 Replies
View Related
Jan 13, 2010
So I've finally got all the partitions sorted out from my previous OS setup, and go to install Windows 7. Partway through the setup (just after asking language) it asks for CD/DVD drivers. Okay, I'll try eject the disk. Nope, eject key not working. So I can't put the disk with all the drivers in. I'll copy the drivers to my external HDD. When I browse for them, I am told there's nothing there. So, I don't know. I can't install the drivers it would seem (unless someone can find the CD/DVD drivers for windows?) and therefor cannot continue with the installation because it wont let me click next until these damn drivers are installed. Windows 7 64 bit, by the way.
View 4 Replies
View Related
Jul 3, 2010
I don't have my CD/DVD for the drivers. Can any1 provide me with the latest drivers I can download from the internet.
View 3 Replies
View Related
Sep 9, 2010
So I am putting Windows 7 on my MBP, so I can play FFXIV, and I noticed I don't have the install disk for my MBP, so that I can install the drivers for the laptop. Is there somewhere I can download these onto a USB and then install them in WIN 7 from my USB drive?
View 2 Replies
View Related
Nov 4, 2010
Got a MBP i5, installed win7 pro on it, tried to install the bootcamp driver from the provided disk, after the install and restart it would crash during windows bootup, I manage to restore it to get back to windows. There is blue screen that pops up for a second, cant seem to read the code though. So far I've manually install some of the basic drivers like sound and videocard, but would like the bootcamp options in the control panel, what should I do?
View 8 Replies
View Related
Nov 24, 2009
I installed Windows 7 64bit on a boot camp partition on my new Macbook. I remember when I installed Boot Camp 2 on my iMac, it allowed me to burn a cd with all the drivers. There was no option for that this time around. I want to be able to use my multi-touch track pad and I just can't seem to find out how to do it? With the last version everything just worked and took me step by step, whereas this time, I'm a little confused.
View 12 Replies
View Related
Jan 17, 2010
Since Apple is releasing new Bootcamp drivers sometimes within the next couple of months, should I wait for it, and only install Win 7 in Bootcamp then? Or will it be pretty much the same if I install it now, and simply update Bootcamp when the time comes? What I mean is, could the current drivers have any adverse effect on the installation of Windows 7? If so I would rather not install now. But if not, I might as well install it now and just update the Bootcamp drivers once Apple releases them - will it be the same?
View 2 Replies
View Related
Jul 4, 2010
I'm trying to install Windows 7 Ultimate 64 bit on my late 2008 MacBook Pro and everything went smoothly until it came time for me to pop in my Snow Leopard disk and install the drivers. When I put the disk in I get a window called "Install Assistant" that has two options: "Remote Install Mac OS X" for MacBook Air computers and "DVD or CD Sharing" again for MacBook Air computers. This doesn't seem right. Shouldn't I get a window that lets me install the necessary drivers for Windows 7? I've also tried my 10.5 Leopard disk with the same result. I have also tried downloading the BootCamp 3.1 update, but when I attempt to install it I receive a message telling me that in order to install Boot Camp 3.1 I need to have BootCamp 3.0 or higher.
View 3 Replies
View Related
Mar 8, 2009
I have tried installing the RealTek drivers on Windows 7 in BootCamp. I get sound, but its all fuzzy and unclear.
View 2 Replies
View Related
Nov 30, 2009
I installed Windows 7 and Bootcamp (Leopard) on my brother's late model White Macbook. Everything SEEMED ok, but now he tells me there is no sound. I don't have the laptop with me, but I had him dig through the installed drivers, and it seems there is a driver installed for the external audio jack, but no driver installed for internal speakers.
View 1 Replies
View Related
Aug 20, 2009
so i just installed bootcamp windows 7 ultimate 7600 x86 retail on 100gb partition and for some reason when i try to install the bootcamp drivers off the install OSX cd it brings up a installer assistant for remote macOSX install and macbook air cd/dvd sharing (it looks like as if its recognizing my mbp as a mba). so that didnt work. im trying to install boot camp update 2.1 for windows vista 32 bit and thats not opening up to install....the only things ive installed so far are the nvidia 9M series drivers.
View 2 Replies
View Related
Oct 19, 2009
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
View 3 Replies
View Related
May 27, 2009
So i am trying to change my apple boot camp drivers to nvidia's, but i think i must have downloaded the wrong ones, or done something wrong. I tried to install Geforce/Ion driver release 192.62, (from nvidia's site, i selected gefore 8 series) and when i ran the setup it said: 'nvidia setup program could not locate any drivers that are compatible with your hardware' . My questions are:
� Which drivers should i download? a link would be great.
� Are there any pre-requisites i must do, such as install version 170 first?
I am using an iMac 24" with 4gb ram, 500gb 5400 rpm HDD, and 8800 GS 512mb.
The reason I am trying this, is because when i play some online games, i often get bad lag spikes, but that chat is still running. Someone recommended me to 'update my drivers'.
View 11 Replies
View Related
Oct 11, 2009
I have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
View 4 Replies
View Related
May 4, 2010
I can't find the answers I know its been asked before.
Its the 2010 MBP 13"
I have Windows 7 Professional 64bit running through parallels 5 and it seems to be missing alot of drivers (wireless most importantly, but also audio etc). Where can I get these, is it the same as bootcamp drivers( are they on one of the disks that come with macs?).
View 2 Replies
View Related
Sep 17, 2010
I've installed a legit copy of Windows XP, SP2. Nothing works, not my webcam, not my internet, not even the full resolution. The first time around that I did this, I had the DVD that came with my iMac, I installed the Windows drivers stuff off of it, and everything worked perfectly.
Can anyone point me in the direction of either a replacement for that DVD (.iso image or something?) or simply the required drivers that will let my iMac 8,1 connect to the web?
View 3 Replies
View Related
May 20, 2010
I boot camped my Macbook Unibody 13" (bought early 2009) with windows 7. However the bootcamp version was 2.0. I now cannot get drivers from the 3.0 bootcamp update.
View 2 Replies
View Related
Sep 21, 2009
Can a 06 Mac Pro run it?
View 2 Replies
View Related
Oct 6, 2008
Just bought a couple weeks ago, 2.8ghz 8-core Mac Pro. My only complaint is the wimpy 2600 XT that it came with.
I know I could put in the 3870 or 8800GT but that would be a step down from my windows pc that I just switched from, which was running 4850.
I've heard the rumors that Mac will soon support the 4800 series ATI cards but my question is will the card work on my current Mac Pro or would this upgrade only be for the new Mac Pros that everyone is guessing will come out in January?
View 2 Replies
View Related
Jun 10, 2009
When I say I'd want the power of the 4870, I mostly mean gaming with that card. Now that I've typed this out, it sounds less and less like it would work.
View 3 Replies
View Related
Aug 23, 2009
I need some help getting some facts straight. I am considering upgrading from the 4870 to the 285. It's a fine idea except that the 285 is very expensive, but at least I could try and sell the 4870 and maybe get $300CAD for it. Then I thought, what about just getting a second 4870 and crossfiring them?
I have read through a good 3 or 4 threads on these forums about powering the second card, flashing PC cards and working with crossfire... that was a freaking long 3 hours of reading non-stop.
So I have these questions which I hope someone here can answer with reasonable certainty.
1) When doing crossfire, do the cards have to be very similar for them to work? If 1 card is 512 and the other 1GB will there be any advantage over just getting a card with 512?
2) If other cards of the same family work, would a crossfiring of the apple 4870 with a 4870X2 perform similar to 3 X 4870 in crossfire?
3) Could someone explain the cables and/or hardware needed to power the second card from the second optical drive slot? I think the best way to go is 1 cable from each card to the regular spot and 1 cable from each card going to the same connector in the optical bay.
4) Apparently 2 X apple 4870s don't work with crossfire. But does this apply to combining an apple 4870 with an unflashed PC 4870?
5) I thought I read about some attempts to modify the ROM of the apple card to enable crossfire with some success. Is that true and if so where is this ROM and does it negatively impact the apple 4870 in OSX?
6) If have read in the past (I think with the PC 3870s) that if you connect a second unflashed card to an apple card with the crossfire link that the card behaves in OSX (doesn't spin it's fans wildly). I don't need it to do anything in OSX except not blow up, I only care about it working in windows. I'd like to avoid flashing the PC card if I can.
View 24 Replies
View Related
