Anyone else noticed the 2600 card is a little bit jumpy (really not much but it drops a few frames every 20 seconds or so) when playing video scaled upto full screen on the MP?
View 2 Repliesis the 2600xt sufficient for photoshop cs4 use? I read around and hear its been geared more towards using gpu processing power and if so would the 8800 card be a 'better' one to get or would the standard 2600xt do fine?
View 4 Replies View RelatedI want to move ATI 2600XT from PCI-e 1 to PCI-e 2 to be more air for the video card because its HOT, and i want to know whats diference & performance is between this 2 slots.
View 4 Replies View RelatedI'd like to use such a card in a 2009 model because it's the only one that has two DVI ports and doesn't require additional power.
View 10 Replies View Relatedwill the ati radeon 2600xt drive an Eizo 2231 at it's native resolution (1680 x 1050)? also, I'm assuming that "Mac" signal listed on Eizo's website means the 'analog' signal. will be using digital input (dvi).
View 1 Replies View RelatedWill a normal PC 256 or 512MB 2600xt be ok as the only GFX card in a Early 2008 Mac Pro?
View 1 Replies View RelatedI've got a Jan 2008 MP installed with the 2600XT card. I've found an amazing deal on the 1900 XT card and was wondering if it would be any better for my MP?
View 2 Replies View RelatedI can no longer get any kind of display from my 2.8 Mac Pro. I was having problems whereby I could turn it off and back on and it would work but now absolutely nothing.
View 4 Replies View RelatedAre there any other places to get the Mac Pro ATI 2600XT video card other than the Apple online store for $129?
View 1 Replies View Relatedleep started up logic and then it happened see attachment. I was completely locked out, no mouse or keyboard, completely frozen. Anyone have any idea what this is about? This is the second time it's happened but it's been a while since the last.
View 1 Replies View RelatedI'm about to get another video card to support 3 monitors.
I've got a 2008MP and I'm wondering if the gt120 is compatible with it.
I have two VGA cables. My first is simply a cheap one which I have been using for the past few months on my full HD (1080p) TV. I use a Mini DisplayPort to VGA adapter on my 17" Macbook Pro and have been able to get full HD output to my TV.
However, this cable was poorly shielded and I got some wavy lines from other TV inputs.
I've just got a new VGA cable, and this has far greater shielding (so that problem is fixed), however I cannot get it to go above a resolution of 1400x1050 - going to 1920x1080 @60Hz as I did with the other cable gives me a message from my TV - "Unsupported signal. Adjust your PC output."
When I try and use the 'Detect Displays' button in System Preferences, I don't see anything happen as a result...
Edit: After a bit of research, my new cable is actually an SVGA cable. It has the same pins, layout etc and as far as I'm aware it should work. Why doesn't it!?
Edit2: Tried another VGA cable, and that works. So my findings are that 'Super-VGA' cable doesn't work, at least by default. Any way I can fix this?
Anyone else experiencing the same issue? after updating to 10.5.7 i got a grey band across the bottom of my screen after restart. I logged in and went to system preferences, but the highest resolution i can now choose is 1920x1080.
My screen is a HP w2448hc, its capable of 1920x1280, worked at this res before update. Anyone suggest a fix? or did they restrict the mac mini in the update?
I recently bought a Macbook, and I've been trying to connect it to my external Samsung SyncMaster P2270 screen using a DVI-to-miniDVI adapter from Apple. It works, both as extended or mirrored screen, but the maximum resolution I get is 1600x1200 (and I actually use 1600x900, cause it looks distorted otherwise).
Any clues on how to get it to output 1920x1080? I'm sure that the screen supports that resolution, because I've used it before with another laptop.
I'm trying to hook my Macbook up to my TV with VGA, and the highest resolution available is 1360*768. My TV is a 1080p TV, so does anyone know why system preferences won't let me select anything higher than 720p?
FYI the TV is a Sony, model KDL32W-4000.
Can anyone tell me definitively if a 1920x1080 DVI display will work with an Aluminum PowerBook 15" 1.5GHz? When I look at the Apple specs page, it says that it can handle external monitors up to 2048 x 1536 on the external display, but that does not specifically state that it supports this resolution. This one is special because it is 16:9, which is not particularly standard for monitors. The card in this model is an ATI Radeon 970. However, their website is completely unhelpful. The paheon the 970 makes no mention whatsoever of Macs, but does go out of its way to note that 1920x1080 is only supported on some OSes. So has anyone successfully run a 1920 x 1080 monitor on a PowerBook? I'm looking at the ASUS VH242H display.
View 6 Replies View RelatedI currently own a 27" Core i7 iMac and already have a 24" BENQ (M2400HD) connected to it via DisplayPort to DVI. I was wondering if using a USB to DVI to display adapter would work with the 1920x1080 resolution.
What I want to do is buy a USB to DVI to display adapter like the one here: [URL] and purchase the 21.5" M2200HD BENQ monitor to add as the third monitor. I want to be able to utilise the 21'5" native resolution of 1920x1080 with the USB display adapter.
On the OWC website, it states that the USB display adapter could support resolutions of up to 2048x1152. Do you think that it would be able to support 1920x1080? Most other USB display adapters seem to only support up to 1600x1200 or around there.
Seeing video driver issues with the 10.7.3 upgrade? My monitor now looks like this (not sure why the pic upside down). This happened after the download from software update, re-applying the combo pack, and re-installing 10.7.0 and applying the 10.7.3 combo pack. I'm not in the process of reinstalling again and will apply the 10.7.2 update.
Info:
Mac mini
Since I updated Snow Leopard to Version 10.6.8 on my MBP15, I can't use my SyncMaster P2770 HD (Samsung) in its highest 1920x1080 resolution anymore. I can choose 1920x1080 in the monitor-preferences, but having done that the resolution remains at 1680x1050 @60Hz (I can see it and even the monitor's info-menu says, that i still use 1680x1050 @60Hz). I use a Mini DisplayPort to VGA-Adapter and a VGA-cable.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a 1920x1080 video that I want to crop to a 4:3 aspect ratio.
I'm working with compressor 3. Â
When I set "crop original" to "4x3 1,33:1", I cannot manipulate the cropping. It is fixed to left=240, right=240, top=0 and bottom=0.
This results in 1440x1080 4x3, that's correct. But what I'd like to do is crop the top and bottom, too, while keeping the 4:3 aspect ratio.
How do i do that?Â
When I set "crop original" to "custom" (I hope I translated that correctly), cropping left, top, right and bottom is possible. I manipulate the red rectangle in the preview window and the cropping changes accordingly. Now how do I tell compressor to keep the 4:3 aspect ratio while manipulating/zooming with the red rectangle? I don't want to calculate the cropping, this is way too cumbersome.
The resolution on the monitor is 1920 by 1080 and the resolution on my Macbook is 1920 by 1200. Will the Macbook automatically adjust to 1080 or will there be some stretching or otherwise bad quality to accommodate the difference?
I don't have to have the latest and greatest technology, but I do want something that will look nice. I really like the HP monitors for the money and was hoping to get something around this size. I just want to make sure this isn't going to screw up the resolution or anything.
I have been having some problems with my Macbook Pro. I have a new BenQ screen connected to it via the Mini Display Port to VGA adapter from Apple. No matter what I do, I cant seem to be able to change the resolution to anything higher than 1280x1024, which is a pretty stupid resolution to have on a 27'' monitor. Sometimes when I plug it in, it gives me the option to change the resolution to 1920x1080.
But when I select it, the screen goes black and displays the message "No signal detected". Now, as it happens, I have a copy of windows installed on a partition of my hdd, and the screen works flawlessly on it. full HD with 75 Hertz. So that shows that it is not a hardware problem, it has to be a software problem. I tried everything, including reinstalling OS X, and deleting the "windowserver" files. no success.
Info:
MacBook Pro, Mac OS X (10.6.8)
I recently purchased a miniDVI to VGA adaptor, and set up a dual monitor (37") to my iMac (24"). The problem is, the new monitor is only displaying at 1440 x 900.. i'd like it to be able to show 1920x1080; the actual resolution of the monitor. Any way of doing this? (the maximum resolution in the display preferences is 1440 x 900)
Just got a 17" unibody to replace my 15" Classic. It appears that the 17" can't output 1920x1200 over the mini DisplayPort to DVI connection, rather displaying 1920x1080. The 15" Classic has no problem outputting 1920x1200 which is the native resolution of this display (an LG L246WP).
What can I do? I tried downloading SwitchResX and fiddling around with that to no avail.
I run a Mac Pro 2 x 2.66 GHz Dual Core Intel OSX 10.5.8 and have been editing video with iMovie HD 5.0.2 for several years. I recently connected my Sony DVR-2100E camcorder to iMovie, imported and edited footage. When I tried to export the edited footage back to the camera iMovie refused to recognise either of my 2 camcorders and would not connect. Although I have iMovieHD installed I do not appear to have iLife. I also have iMovieHD 5.0.2 installed on my Powerbook. When I connect either of my 2 camcorders to the Powerbook they connect OK to iMovie but the moment I try to export any footage back to camera it immediately crashes and say's it has lost the connection. This happens every time. If I purchase the Snow Leopard upgrade for Leopard for $39 will it have iLife with a full version of iMovie included, or will I have to purchase a full installation version? I am hoping that a newer version of iMovie with iLife will solve my problems.
View 4 Replies View RelatedI recently got a new Macbook Pro, and I am trying to record some gameplay footage of my online adventures in PS3 games to share with friends. I would like to record in preferably HD 720p if possible, but Standard Definition would be acceptable only if I can play the game in HD on my Television while it recorded in SD. My TV does not have any outputs, only input connections for component, composite, and HDMI.
I've done a lot of researching on the internet, and the closest thing I found to what I was looking for was the Hava HD Wireless. [URL] The problem is that it doesn't seem to say anywhere that it will work with a Mac. I was wondering if there is any Mac solution to my problem.
I am using the first version of Motion. I have some footage I shot and converted to a .mov file. I know Motion 3 does speed up footage but my version does not. Anyone out there know how to speed up footage using a low cost or free solution? This is the last thing i need to do to finish this project.I do not own final cut or quicktime pro. Just have Motion and iMovie '08
View 2 Replies View RelatedI have an imac 10.5.7 with 4GB and a 2.66 GHz processor. I have just installed Final Cut Pro 4 and I read that I should never use the Hard Drive as the scratch disk.
I need to know where else can I store my video footage. Does the mac have another disk that can store all this information. Or do I need to get an external hard drive?
I bought a macbook pro a few weeks ago, I've got some footage which I want to edit and I asked some people I know and have been told I need to have a firewire port on my laptop and a cable to connect this to my videocamera. I'm not really sure what kind of firewire port I have though, I have the latest version of macbook pro, where can I get this cable from? Is it expensive?
Info:MacBookPro
My computer specs are: G5 PowerPC, 2.0Ghz Dual core processor, 8 GB RAM, 256 MB Ati Radeon 9800 pro graphics card and Final Cut pro 6.0.6. Â
Now my friend is thinking of buying a Canon 60d and my computer is the one we always edit on. Will it be able to edit the footage if I converted it to Apple Prores (LP, HQ or standard)? Â
Info:
PowerMac, Mac OS X (10.5.8), G5 Dual 2 GHz, 8 GB Ram, 1.65 TB HD
