IMac :: Snow Leopard 10.6.4 Connecting To Windows SBS Server Domain
Aug 19, 2010
I looked for a introduction forum but couldn't see one so hello guys and gals. Great forum you've got here..Right my issue is as follows.I have a new iMac Pro on snow leopard 10.6.4 and it is linked to a Windows SBS server 2007 but i don't think i've done it properly.When i switch the machine on all i get on boot up is 1 local user Sometimes i can leave it and it will offer me the 'Other' option which i can then login to the server But most times it doesn't to that... I have to logon as that local user and then unbind the windows domain and rebind it then when i logoff it shows me the 'Other' user Also another thing thats annoying is it doesn't map anything automatically i have had to create a alias icon on my desktop to go to my server space and it can take up to a minute to connect to the server..
I have a Snow leopard server with a folder shared Via SMB for the 2 PC's we have, all the macs can read and write to this folder OK. About once a week the 2 pc's take 10 mins to start and then cannot connect to the share. Web/email and sharing betwen them still works. I can ping the server from both. I've turned off the smb and restarted it. Also tried restarting the Xserve. This still has no effect. All internal firewalls are off. I've tried guest access.
I have a new 27" i7 iMac with OSX 10.6.4 and need to connect it to our work place network that runs a Windows 2003 Domain Controller etc. I've never touch an Apple/iMac before and I don't know much of anything about them. I'll tell you this much, I LIKE THIS MACHINE! WOW! I really like it! So I'm pretty sure I have it on the network... maybe. But the biggest problem I have is when I log on as the user (and it indicates "Network" under the user name), I can see the network resources, the user folder is available down on the Dock but when I make changes to the Desktop, Dock etc. they don't save when I log out and log back in. So I hope someone here can help point me in the right direction. I have done a lot of Google and other forum search but I'm not really finding my answer.
I've registered a domain and it works wine when anyone enters www.mydomain.com. However when I type the domain name without 'www', I get the following:Network Error (tcp_error) A communication error occurred: "Operation timed out" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time. For assistance, contact the IS Support Center. Â
Info:  iMac G5 PPC,  Mini Server,  MBP  TV, Mac OS X (10.6.4), iPad2, iPhone, AppleTV
i have been given the task of trying to get mac machines printing on Ricoh printers on a windows network in a small private school. I have gone through the appropriate steps of installing the drivers for the printers through using PxlMono, Foot, Ghost, etc... to make it so I can work without the cards in the printers.Â
However, adding the printers to the mac is a whole new problem. The machines are added appropriately to the domain. The necessary printers are now showing up in the open directory portion of the adding printers window. However, upon trying to add them, it states the following: An error occurred while trying to add the selected device.
Bad device-uri "smb://****-DC1.****.loc/High School Workroom RICOH".Â
Are the spaces in the name creating issues? There is another printer on the network that worked with a different mac that appears to have spaces in the name as well. Adding with IPP doesn't, saying that there was an error with it and asks if i want to install it anyway. If I do install it anyway, it becomes unresponsive regardless. I've even gone through the CUPS menu in port 631 and tried adding with IPP that way, and it still doesn't work. I'm about to go insane trying to get these dang things to print. I have 5 different macs trying to connect for 4-5 printers each for this craziness.Â
I am tryiing to connect to a remote desktop servere which , I think, is Windows based. I know the IP address which, for example, is 123.45.67.891:2345
When I type this into the "connect remote server" (Finder>Go> Connect remote server) Apple adds a prefix  afp:// .  In the "missing manual" book by David Pogue he suggests the prefix ought be  smb:// for a windows server. Either way, a dialogue box informs me that attempt has failed whem I try to connect
I recently purchased a new MacBook pro with Mac OS X, I updated the OS to the latest release which is 10.7.3. I need to join (bind) a MS Windows server 2008 Domain, but when I try to bind I get below error:
Unable to add server.
The daemon encountered an error processing request (10002)
I searched the internet for a solution; most suggestions refer to sync the clock with the domain clock as Kerberos protocol is unable to authenticate. I cannot find a option to sync the clock with the domain clock, how I do that?
I have problem with a clients windows laptop. It used to be able to connect to their companies mac server. But since he got back from a trip the laptop doesn't connect anymore. I can ping the server. And when I try to redo the network drive I'm prompted to enter my credentials. But whatever I enter it doesn't work.I already tried to use SERVERNAMEuser.... and also check security policies.
I have MAC OS X 10.7.3 After joined to Windows Domain 2008 R2 and reboot system - i have not items, where is i must enter domain credentials.But, if i login as local user, and logoff - i have item for entering domain credentials.Why this item not show me after restart? How i can fixed it?
I have recently bought a Mac Book Pro. This is my first experience with a modern computer from Apple and in very first contact with Mac OS "Snow Leopard".
I am trying to configure that Mac to share the resources of my Windows XP small network at home. For that I have followed several instructions I found published on the Internet by other Mac users who were trying to do exactly the same as I am trying to do.
Unfortunately I face a quite basic problem all the time: when I follow any of the posts/ instructions, sooner or later, I cannot move forward because I cannot find where exactly the DIRECTORY ACCESS (or any functionally equivalent configuration program like that) in Mac OS Snow Leopard is located.
I have an issue with my Windows 7 Client's they can connect my VPN SLS 10.6.8 but I tried to ping the server IP and get no answer. Â
Replay from x.x.x.x: Destination host unreachable. I did all registry changes for W7 Ultimate 64bits but no chance. All my Mac's work fine with all server services.Â
Info: Mac mini, Mac OS X (10.6.8), MAC and Windows 7 clients
I have snow leopard server working well for emails and web site but is it possible to install and run a windows accounts software programme on the server and access it over the web. If this is possible how would I do it.
I'm running the OSX 10.6.8 and want to connect to applications running on Windows Small Business Server 2008. Is this easy or difficult or impossible?
Is there a command to force time sync on Snow Leopard machines? I have lots machine which are joined to windows domain controller using third party utility (AdmitMac by Thursby). Even though under Day & Time system preference, I have set the machine to sync to our server but machine are still not correcting the time.Â
I have tried following methods to force the machines to sync: I have manually selected the machine to sych with Apple but that does not change the time at all (even after couple of reboots)Changing the date and time to something completely different (year, month and day) then rebooted machine then force it back to our server but that does not change machine time either.Only thing which has worked so far is that I have manually adjusted that time to match the next working machine. All of this has caused me lot of trouble in Mac labs because machine will not allow anyone to login and I have remove it from the domain and then re-join back.
We have a saving printer at our office that will not print no matter what I do, the OS is version 10.5x on a iMac. It sees the printer as a IP or ldf but it won't print! I know the printer works cause we print with windows PC's? The iMac is on a windows domain running a Mac OS.
Since yesterday the mail programme on my iMac does not download e-mails from the gmail server, but luckily I still can send e-mails. On the iPhone I still receive e-mails and I can send e-mails. The iPhone is connected to the internet either via 3G or the same router I am using for the iMac.
Via the Safari browser I do have access to all my e-mails on the gmail server. Mail: Version 4.5 (1084)
I have always connected to my server remotely through an IP address.I have not been able to do this with my Macbook pro OS X 10.5.6.Apparently something about not being able to use active X on Mac.Anyone have any insight? Can't believe I am the only person trying to do this!
I'm using Viscosity to connect to our VPN at work. I'm able to establish a connection just fine, but I have a few issues. It appears to be assigning me a local IP address; however, I'm unable to ping the gateway. I'm also unable to ping the local Samba domain.
At my company we are using windows exchange server 2003. Now my boss bought a new macbook pro (snow leapard) with Mac office 2011 installed. Apparently Outlook '11 and exchange server '03 doesn't work together. Only exchange server 2007 and up are compatible. Is there any way around this? My boss hates Office 2008. Can't blame him
how to connect a Windows 7 machine to my remote OS X Lion File Server? On my macs, it is simple, I go to finder, choose Go -->Connect to Server, and enter my IP address. I can't seem to figure out how to do this on a windows system.
i have a domain controller and active directory based policy win 2003, one xserve running mac os x server 10.6.8 and alot of macs workstations. How can i push login script on all macs without adding it in login items? The script i want to store on smb or afp share disk, and will be edited from time to time. I've tried to add it on xserve from WGM, but it threw an error that current directory schema doesn't store desktop settings.So how can i solve this?
I run 10.6.8 server in a VM with Parallels Server for Mac. Lithium pinged me early Monday morning to tell me that my calendar server wasn't reachable. I found it had kernel panicked. After resetting it and verifying the directory structure and permissions, it booted fine. But availability or free/busy wasn't working for all users! The events were all there. Invites could be sent and received but when a user checks for availability when creating events. they see the daily work hours grayed out but not anything corresponding to a scheduling conflict. Â
Things I have Tried:
- bounced ical server
- Rebooted the server
- checked the owners and permissions for the data store hierarchy. (_calendar:_calendar 750)
- checked for xattrs on .ics files in several calendars
- deleted .db.sqlite for several users in several dir in their calendar stores
- in the past I have found that some iTIP invitations seem to get "stuck' causing problems with an individual users free/busy and deleting the inbox resolves this so I deleted several inboxes
-I moved a copy of the data store to a test server and pointed several clients at it.Â
The issue persisted in all of these cases without any change in behavior with one exception; somewhere (i lost track of where) during this process users also lost their delegation preferences. I'd love to find out how and where that is stored so that it can be restored in the future. It seems pretty fragile...Â
I found one way to restore the functionality; copying a users __uid__/<GUID>/calendar out. . Moving all the folders under <GUID> out of the way and dropping the .ics files into ical with their account configured in that instance. Although this worked for selected users, I have many, many users and calendars so this solution would be suboptimal. Â
my problem is that on a restart of one of my 10.6.8 Servers parts of the Serveradmin configs are gone while some of them persists. The lost configs are everytime the same: VPN (complete) and iChat (a secondary but very important Host-Domain). Of course a can restore them from a backup but that shouldn't the standard procedure after a restart....Â
I am running an open directory/active directory network. Authentication is from the Windows server 2003 active directory. It has worked fine until the last month. Now clients stop authenticating & when I check the AD plugin it says network accounts are not available. I can force the server to unbind, then renew the binding & everything works great.Is there any work around or fix for this other than upgrading the windows server to 2008?Â
