Mac Mini :: Any EFI Or SMC Firmware Updates For The "Mid 2007"?
May 13, 2012
Are there any EFI or SMC firmware updates for the "Mid 2007" Mac Mini? It's certainly possible that there were never any updates, but it seems unlikely that they had to update either the EFI, SMC, or both for most Mac models before and after this one. ...unless they just didn't care – it was the Mac Mini after all.Â
My Mac Mini is having some issues that seem to have been addressed on other models via firmware updates in the past (i.e. loss of responsiveness when connected to a Mac that is using FireWire disk mode, some other performance problems that I haven't yet been able to pin down using normal methods).
[code]...
P.S. If anyone from Apple ever sees this (unlikely), please consider adding MacMini2,1 to the list (even if there are no updates) so that we know the listing was not just omitted in error. It would also be nice (if it doesn't already exist) if there was a page listing the effective version numbers for all models (not just update numbers).
I can't get the Firmware updates or any other software updates.I have an old MacBook (2006) which doesn't have an intel chip! and it keeps saying this: The Installer could not validate the contents of the CoreFP package.
Just received SuperDrive Firmware Update 3.0, MacBook EFI Firmware Update 1.4, and AirPort Client Update 2009-002 1.0 on Software Update for 13" Unibody MacBook.
[URL] MacBook SMC Firmware Update 1.4 is available either through Software Update or via direct download, and is applicable to the following models:
MacBook (13-inch Late 2007) MacBook Pro (17-inch, Early 2008) MacBook Pro (15-inch Early 2008) MacBook (13-inch, Early 2008) MacBook (13-inch, Late 2008)
I am planning to clean install SL on my macMini. I've applied firmware updates as they became available under the "Check for new software" (under the apple). Will I have to reinstall the firmware updates, and how do I do that and how would I know which had to be updated?
I have a late 2008 aluminium macbook, recently "clean" installed snow leopard, everything cool apart from the recurring issue with adobe acrobat pro 9 64bit pdf printer driver, anyway. How do I know whether or not I have the apple firmware updates from this site [URL]. Is there any way of checking or have they just be integrated with the snow leopard install. Also is it still ok the drive makes a noise when you either turn the macbook on and / or when the macbook comes out of sleep. Apple fixed this with a firmware update for the imac and etc, has there been one for the Macbook?
I have a late 2008 alumunium Macbook 2.4GHz, upgraded to 4GB RAM, running Snow Leopard 10.6.2. Due to a kernel panic earlier today I went through the websites shown in this thread: [URL]. As I was doing some of the procedures, I came across a website about EFI and SMC firmware updates for Intel-based Macs shown below: [URL].
According to that website the Boot ROM Version on my late 2008 Aluminium Macbook, should be MB52.008E.B05. Instead it is MB51.007D.B03
If I understand correctly, the support website probably has a typo, because my Macbook is coded Macbook 5,1 and not 5,2. Also on this website: [URL] it says MacBook5,1 will update to MB51.007D.003, which is still not the number I have in the System Profiler. Of course the above website has Mac OS X 10.5.7 as a requirement, so I'm not sure if the number changes in Snow Leopard. I just want to know if the Boot ROM Version in my System Profiler is ok, or if something is wrong.
macbook 1,1 efi and smc up to date, battery not being charged, up to today magsafe led flashed amber green, now solid green but menu bar says battery not charging?
Info: MacBook, Mac OS X (10.5.8), 1tb HDD, 1 gb memory.
my macbook pro (late 2011) is powering down without warning. I'll be writing an email and w/o warning, it's off. I'm unable to turn it back on with the power button unless i hold it down for a slow count to 10. Fyi - machine is 100% charged when this happens. Two days ago, I did SMC and PRC resets with Apple Care. I needed to do both of these again yesterday on my own.
I've been going on two weeks now without my 13-inch mid-2009 mbp...i installed the 10.7.3. lion update but after it was completed i powered down my laptop and started it up only to find a blinking folder with a question mark...the logic board was replaced in mid-2010...i'm able to boot of an external drive running lion 10.7.3...i replaced the wd hdd with a new one & now it doesn't recognize it in disk utilities...i've replaced the ram with new ram & changed the hdd cable...i took it to apple & they said it should be either the cable or the hdd...i tested the hdd in another enclosure & it's running fine..
Info: MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3)
was watching a video on top gear site and suddenly the mac mini light went off and now the unit will not power back up. the plug in where i put the adapter in has power because i plugged in a lamp and it works. i tried to unplug the unit and held down the power button and plugged in the unit and let go the power button and pressed it again right after letting go the button. still no power to the little light just below and to the right of the cd slot. would like to know if there is any thing else i can do. i have a fluke 87 meter and the output of the little brick is 18.54 volts dc. sincerely dickie from thibodaux, louisiana.
When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6.
having issues updating thier firmware? Software update shows the 1.6 firmware update needing done, I go throught the process, it reboots and never installs the firmware. System profiler still showing the old version. I tried downloading the file from Apple's website and manually installing and it does the same thing. I'm at my wits end here. It doesn't really bother me except that it constantly shows up in software update.
Have it hooked up to creature speakers, which never had an issue before. Sometimes if I fix disk permissions (which disk utility points out but never really fixes) and zap the PRAM, after a few restarts the audio will work. But right now mac mini is acting like it isn't connected to its speakers. Even the internal one. The previous owner did upgrade the RAM to 3 gigs...
Apple appears to be distributing a new firmware update that will attempt to address flickering and blank video issues on the latest generation of MiniDisplay Port-equipped Macs connected to external displays using the company's Mini DisplayPort to VGA Adapter.
The Cupertino-based company is believed to have been working on the update since last fall when early adopters of the new unibody MacBook Pros began experiencing issues when connected to an external display, where the display would sporadically lose signal for a few seconds and flick back on.
Since then, it appears that external display issues have spread to a variety of other new Macs equipped with Mini DisplayPorts, in particular the new Mac mini. There are quite a few threads (1, 2, 3, 4) on the Apple support discussion boards pertaining to similar issues, though not all involve problems when using the Mini DisplayPort to VGA Adapter.
For those users who are connected to an external display via the Mini DisplayPort to VGA Adapter, Apple is quietly distributing an 11.2MB "Mini DisplayPort to VGA Firmware Update" over Software Update that will reportedly update the firmware on the adapter itself.
"This firmware update addresses intermittent flickering and compatibility issues such as no video on some external displays when using the Mini DisplayPort to VGA Adapter on your Mini DisplayPort enabled Mac," the company says in a brief set of release notes. "The Mini DisplayPort to VGA Adapter firmware update will be downloaded to the Utilities folder and will automatically launch to update the firmware on the Mini DisplayPort to VGA Adapter."
In order to trigger the update, Apple says the Mini DisplayPort to VGA Adapter must be plugged into your Mac and a compatible VGA display. The company also says that the Mac's power adapter must be plugged into a power outlet if the Mac is a notebook.
It should be noted that as of press time, there was no mention of the firmware update on Apple's website and only a couple of users have reportedly seen the update turn up in Software Update, mainly those located overseas. [ View this article at AppleInsider.com ]
i accidentally hit the power switch on the wall during an upgrade (might even have been a firmware upgrade, I didn't really look at what was going on). Anyway, now it hangs on the silver Apple logo screen with a spinny wheel on reboot. It's only 3 months old, it's the $599 model.Â
What to do? I see that you can download firmware restoration disks but they appear to be limited to earlier versions of the Mac mini.
Info: Mac mini, Mac OS X (10.7), I think the OS is OSX 10.7...
Happy to find any solution to this including an HDMI splitter box, mac mini solution, anything from Matrox or Blackmagic design, or if it is more cost effective even buying a new imac if it can output two video signals at the same time. So basically I wish to feed the same computer output images via mini DVI to two HDMI projectors simultaneously.
I am just updated to Mac OS X 10.5.8 so that I could use itunes. But now I get a message that says that to Open the latest version of itunes (that I just downloaded), I need I need Quicktime 7.5.5 or later. I've tried "updating existing software" in the Quicktime menu, but no updates are found. I've also been to the quicktime download page on apple.com and tried that, but no dice.
I am trying to download updates on my MacMini. Every time I try I get a message that says "Mac update cannot be saved you are not connected to the internet." but I am always connected to the internet. Sometimes I get other error messages, but I can't remember what they say. I have a Mac OS X 10.7 and it is trying to download Mac OS X Update Combined version 10.7.3 and Java for OS X 2012-003.
I should mention that I am also having trouble backing up on time machine. Though it works when I hook my external hard drive. A few months ago I was having some issues with my computer so I whiped it clean and I think somewhere in the process things got screwed up. I don't know if any of this has anything to do with why I can't update my computer.
When Flash Trojan was announced Apple sent 2 software updates. iMac downloaded and installed them via software update. (see attached graphic) Mac Mini did not and only advised that "that there is no new software and that software is up to date".
Info: iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
Intel X25-M 160GB, how do I find out if it has the latest firmware v1.5 from Dec 8, 2009. And is the Solid State Drive Toolbox v1.3 from Mar 22, 1010 worth downloading?Intel's download/support page doesn't tell you how to know if your SSD has the latest firmware or not.
I was travelling and added a firmware password a few months back, I now want to disable this to install Ubuntu on a partition of my MacBook - but there are no directions how to in the utility.I looked at the Apple doc I originally used to set the password: [URL]/HT1352, and I cannot find a companion document for taking it off. So, if anyone knows how I go about doing this,
So a while back I had final cut pro installed, and eventually deleted cause I no longer needed it. I used AppCleaner when removing to try and make sure I got it all.
Well every time I do a software update it wants to install "Pro Applications Update" and "Prokit Updates" Which are updates for final cut pro and its related apps.
Any idea how I can stop it from wanting me to install these updates for something I no longer have?
This is my first post and I've a couple of questions and did searched for it on the internet but unfortunate ...For my study Multimedia designer, I am planning to get a Mac Pro but my school wants us to get a D*ll V laptop, windows 7 with these software:Adobe CS4 Master CollectioMicrosoft Office Enterprise 2007Microsoft Office Project Professional 2007I didn't choose for this D*LL laptop because its a 17,3" one and with my schoolbooks and etc in my bag, it would be pretty heavy for me.I hope that someone in this forum knows the answers on my questions and I really appreciate your help cos I even asked my friends and family about it but unfortunate, no luck so far
I am trying to install the new updates for Aperture and iPhoto. When I tell software updates to check for updates, it tells me all my software is current. I know there is a new version of Aperture and iPhoto because I installed them two days ago on a different computer.
I have an Early 2009 Mac Mini with Mini DVI and Mini DisplayPort. And I have two 1080p HDTVs. The Mac Mini is capable of dual display, and I've gotten it to work before, so the issue is not the TV or Mac. And I have tried both Mirroring and No Mirroring.
I got a Mini DisplayPort to HDMI Adapter (#5311) and a Mini-DVI to HDMI Adapter (#4852) both from MonoPrice. And for some reason I can't get the Mac Mini to dual display, it's only one or the other.
Before I had a Mini Displayport Male and USB Male AUDIO to HDMI Female Converting Adapter (#5969) and I got video on both HDTVs, but not audio at the same time b/c one was USB and one was TOSLINK.
I'm not sure why I can't get video on both monitors. Any help?
