Mac Mini :: Errors Downloading Updates On It?
Apr 14, 2012
I am trying to download updates on my MacMini. Every time I try I get a message that says "Mac update cannot be saved you are not connected to the internet." but I am always connected to the internet. Sometimes I get other error messages, but I can't remember what they say. I have a Mac OS X 10.7 and it is trying to download Mac OS X Update Combined version 10.7.3 and Java for OS X 2012-003.
I should mention that I am also having trouble backing up on time machine. Though it works when I hook my external hard drive. A few months ago I was having some issues with my computer so I whiped it clean and I think somewhere in the process things got screwed up. I don't know if any of this has anything to do with why I can't update my computer.
Info:
Mac mini, Mac OS X (10.7.2)
View 1 Replies
ADVERTISEMENT
Aug 31, 2008
For some time now I have had problems downloading files/programs from the net. Things like OS critical updates; Adobe updates; VMware trial software; games; virus definitions. The download run into problems when unpacking - most common error is that verification failed but there are also failures in unzipping files (NAV installer being the most recent).
I have checked a number of forums and found similar problems but none seem to work (eg. mounting from disk utility). The only thing I haven't done is reinstall from OS archive disk as this could entail reinstalling a lot of things (mind-boggling).
I have a MacBook (2GHz Intel Core 2 Duo with 1 GB 667 MHz DDR2 SDRam) running OSX 10.4.11 and also have Parallels 3 (build 5608) running Vista. The download problems seemed to begin with updating the Parallels software. I received the verification error or a checksum error. I resolved this problem by using different download sites. When investigating this problem it was suggested that the ISP provider was at fault. Is this possible?
View 1 Replies
View Related
May 4, 2012
We've been trying to download the latest digital copy of Mission Impossible from iTunes and have had no luck. It stops downloading and gives an error message (unknown error occurred (-50)) and have received (err - 8008). We've checked for software updates, rebooted the system and tried again, but nothing.Â
View 4 Replies
View Related
Dec 16, 2009
Trying to install downloaded updates, I get this, over and over: "The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs." There are four updates waiting that I have tried to install as a group and individually. Part way through the installation it says "An error has occurred". When I click OK the above message shows up. Is it me, the computer, the connection, the server, what?
Mac 10.6.2
View 1 Replies
View Related
May 15, 2012
I have several apps that I need updating. Unfortunately when I try to update them, I get the spinng wheel (Mac Appt Store menu bar) spinning forever! I tried changing my Apple password, tried the Certificate Revocation List to off, I deleted the apps and tried downloading them again and I still get the gray spinning wheel
View 1 Replies
View Related
May 19, 2012
The updates can't be installed after downloading
Info:
iMac, Mac OS X (10.5.2)
View 1 Replies
View Related
Mar 4, 2010
I'm running on a MacBook Pro OS X 10.4.11. I can't seem to run any webvideos anymore.I'm trying to download Adobe Flash Player version 10.0.45.2,but I just noticed that I can't download any updates.ould it be my settings or the netwark I'm using? Ether way, can omeone help me with my computer settings just to rule-that-out please?
View 1 Replies
View Related
Mar 22, 2012
I cannot download apps or updates on the Mac App store. Whenever I try to download apps or updates the page seems to be loading something but nothing really happens. I cannot even log out from my apple account on the app store.
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 23, 2012
Recently, I tried updating an app on my Macbook Air, specifically Red Crucible 2. I clicked update, it started downloading, reached 10 MB, then started downloading from the beginning again, and it kept looping. I have 23 GB free, so I'm sure it's not an issue with free space. I tried downloading other updates and the same thing happens again, it reaches 10 MB then starts downloading again!
Info:
MacBook Air, Mac OS X (10.7.3)
View 3 Replies
View Related
May 2, 2012
Once my computer restarts, I click Software Update to find that nothing actually was installed. If I try again, the same problem persists.
View 1 Replies
View Related
May 13, 2012
Why my Apple 2006 mac mini does not receive updates
Info:
Mac mini, Mac OS X (10.4.11), why mac mini 2006 does not receive
View 3 Replies
View Related
Mar 14, 2012
When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6.
View 4 Replies
View Related
Jun 24, 2012
I cannot get updates:
The system recognizes I need updates then says:
The update cannot be saved
A network error has occurred. Check your internet connection and try again.
I don't think there is anything wrong with my connection, and I always get the same.
Info:Mac mini, Mac OS X (10.7.2)
View 2 Replies
View Related
Feb 1, 2012
how do I uninstall apple software updates?
Info:
Mac mini (Late 2009), Mac OS X (10.6.8)
View 3 Replies
View Related
Apr 8, 2012
I am just updated to Mac OS X 10.5.8 so that I could use itunes. But now I get a message that says that to Open the latest version of itunes (that I just downloaded), I need I need Quicktime 7.5.5 or later. I've tried "updating existing software" in the Quicktime menu, but no updates are found. I've also been to the quicktime download page on apple.com and tried that, but no dice.
Info:
G5, Mac OS X (10.4.9)
View 4 Replies
View Related
Apr 12, 2012
iMac and Mac Mini both running 10.7.3
When Flash Trojan was announced Apple sent 2 software updates. iMac downloaded and installed them via software update. (see attached graphic) Mac Mini did not and only advised that "that there is no new software and that software is up to date".
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
May 26, 2012
Sinces APtril email stooped downloading emailk from my yahoo, hotmail, gmail accounts, it starts but do not dowload anything in hours
Info:
Mac mini, iOS 5.1.1
View 5 Replies
View Related
Aug 21, 2010
So a while back I had final cut pro installed, and eventually deleted cause I no longer needed it. I used AppCleaner when removing to try and make sure I got it all.
Well every time I do a software update it wants to install "Pro Applications Update" and "Prokit Updates" Which are updates for final cut pro and its related apps.
Any idea how I can stop it from wanting me to install these updates for something I no longer have?
View 1 Replies
View Related
May 13, 2012
Are there any EFI or SMC firmware updates for the "Mid 2007" Mac Mini? It's certainly possible that there were never any updates, but it seems unlikely that they had to update either the EFI, SMC, or both for most Mac models before and after this one. ...unless they just didn't care – it was the Mac Mini after all.Â
My Mac Mini is having some issues that seem to have been addressed on other models via firmware updates in the past (i.e. loss of responsiveness when connected to a Mac that is using FireWire disk mode, some other performance problems that I haven't yet been able to pin down using normal methods).
[code]...
P.S. If anyone from Apple ever sees this (unlikely), please consider adding MacMini2,1 to the list (even if there are no updates) so that we know the listing was not just omitted in error. It would also be nice (if it doesn't already exist) if there was a page listing the effective version numbers for all models (not just update numbers).
Info:
Mac mini, Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 19, 2012
I am trying to install the new updates for Aperture and iPhoto. When I tell software updates to check for updates, it tells me all my software is current. I know there is a new version of Aperture and iPhoto because I installed them two days ago on a different computer.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 19, 2012
I can't get the Firmware updates or any other software updates.I have an old MacBook (2006) which doesn't have an intel chip! and it keeps saying this: The Installer could not validate the contents of the CoreFP package.
Info:
MacBook, Mac OS X (10.5.8)
View 3 Replies
View Related
Dec 13, 2010
I just got my MBP yesterday, and so far it's been incredibly frustrating. Trying to download Firefox, 3 separate times, I get "image corrupted" errors when I try to open the .dmg. This is probably the 10th+ time it's happened today errors ranging from "invalid checksum" (from Facetime, downloaded from Apple), to "error -199". Any ideas what's going on? The same things appear to be just find on my Mac Pro, and they're running the same software. Already ran verify/repair disk multiple times.
View 1 Replies
View Related
Jun 19, 2009
Repairing permissions is still coming up with errors in the log?? I thought after doing this, would give me a clean OS?? I'm so confused.
View 4 Replies
View Related
Jul 14, 2009
I've just done a fresh install of Leopard to see if it would clear off some of these permission errors. Does anyone have any suggestions? I've tried OnyX, booting off Install CD.
View 5 Replies
View Related
Sep 1, 2009
I just did a clean install, and load my backup from Time Machine. When I tried to repair permission, I got lots of errors. It says it is being repaired.. but the next time I run, the problem retains. And there is also one SUID problem that has not been repaired..
Repairing permissions for "Macintosh HD"
ACL found but not expected on "private/etc/apache2/httpd.conf".
Repaired "private/etc/apache2/httpd.conf".
ACL found but not expected on "private/etc/apache2/users".
Repaired "private/etc/apache2/users".
ACL found but not expected on "private/etc/postfix/main.cf".
Repaired "private/etc/postfix/main.cf".
ACL found but not expected on "private/etc/postfix/main.cf.default".
Repaired "private/etc/postfix/main.cf.default".
ACL found but not expected on "Library/Preferences/Audio".
Repaired "Library/Preferences/Audio".
ACL found but not expected on "Library/Preferences/com.apple.alf.plist".
Repaired "Library/Preferences/com.apple.alf.plist".
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
ACL found but not expected on "System/Library/Keychains/X509Anchors".
Repaired "System/Library/Keychains/X509Anchors".
ACL found but not expected on "private/etc/hostconfig".
Repaired "private/etc/hostconfig".
ACL found but not expected on "private/var/db/launchd.db/com.apple.launchd".
Repaired "private/var/db/launchd.db/com.apple.launchd".
ACL found but not expected on "private/var/yp/binding".
Repaired "private/var/yp/binding".
Permissions repair complete
View 8 Replies
View Related
May 27, 2012
My 24" iMac had some graphical glitches and froze up, so I ran MemTest86 on it and got a number of errors reported on my RAM.Â
I had upgraded from 2x1gb to 2x2gb and kept the old RAM, so I gave that a try. This time MemTest86 itself came up with graphical glitches and reported problems on this RAM as well.Â
I gave up for the night and the following morning when trying to boot, all I get is the monitor powering up and the Mac boot sound. The system then reboots immediately and does the same thing over and over. Screen powers on (stays black though) and sound plays. I never get to a gray screen at all nor does the Apple logo ever appear.Â
Trying to boot to safe mode, off cd, single user mode are all unsuccessful, I never get out of the boot sound loop.Â
NVRAM/PRAM reset attempted, likely unsuccessful.Â
I've tried booting with 1 DIMM and 2 DIMM across the different RAM I have, but the same thing always occurs. Only time I get different behaviour is when booting with no RAM, and then I just get a beeping tone.Â
View 5 Replies
View Related
Jun 2, 2012
My G5 2.3GHz has 8 2G DDR2 SDRAM PC2-3200E-288, but onely the first slot is a status OK.The other 5 slots he is giffing ECC-errors and the last 2 he don't see them (emty).
Info:PowerMac, Mac OS X (10.5.8)
View 5 Replies
View Related
Jun 3, 2014
How do you correct syntax errors in OSX 10.9.3?Â
Info:
Mac Pro, OS X Mavericks (10.9.3)
View 14 Replies
View Related
Sep 12, 2010
A lot of these errors keep "polluting" my Console daily. I've reset Dock, but nothing changes. What are these msgs all about? I've had these for long time (possibly even in Leopard - I don't remember exactly).
View 13 Replies
View Related
Sep 16, 2010
I recently bought a hard disk drive for my macbook - specifically an internal, 500GB disk with 32 MB cach�. I installed OSX without any problems, but lately I've noticed some programs start doing funky things (Finder getting stuck frequently for no reason, once even the settings panel got stuck, svn weird behaviour complaining a file is both non-existant, locked and not versioned, etc.). Just out of curiosity I tried checking the disk with the disk utility and it found filesystem errors.
I heard some rumours a few years ago that disks with big cach�s required a bit more time before shutdown to committ everything to actual disk.
These errors and funky behaviour *seem* to appear when I reboot so I'm suspecting the rumours might be true. What do you think? Anyone out there with a big cach� HDD? should I try exchanging it for one with a smaller cach� or is there any setting I can access for this case? Or maybe is it simply defective?
View 7 Replies
View Related
