Hardware :: Using Mini DisplayPort To VGA Adapter Firmware Update?
Mar 17, 2009
Apple appears to be distributing a new firmware update that will attempt to address flickering and blank video issues on the latest generation of MiniDisplay Port-equipped Macs connected to external displays using the company's Mini DisplayPort to VGA Adapter.
The Cupertino-based company is believed to have been working on the update since last fall when early adopters of the new unibody MacBook Pros began experiencing issues when connected to an external display, where the display would sporadically lose signal for a few seconds and flick back on.
Since then, it appears that external display issues have spread to a variety of other new Macs equipped with Mini DisplayPorts, in particular the new Mac mini. There are quite a few threads (1, 2, 3, 4) on the Apple support discussion boards pertaining to similar issues, though not all involve problems when using the Mini DisplayPort to VGA Adapter.
For those users who are connected to an external display via the Mini DisplayPort to VGA Adapter, Apple is quietly distributing an 11.2MB "Mini DisplayPort to VGA Firmware Update" over Software Update that will reportedly update the firmware on the adapter itself.
"This firmware update addresses intermittent flickering and compatibility issues such as no video on some external displays when using the Mini DisplayPort to VGA Adapter on your Mini DisplayPort enabled Mac," the company says in a brief set of release notes. "The Mini DisplayPort to VGA Adapter firmware update will be downloaded to the Utilities folder and will automatically launch to update the firmware on the Mini DisplayPort to VGA Adapter."
In order to trigger the update, Apple says the Mini DisplayPort to VGA Adapter must be plugged into your Mac and a compatible VGA display. The company also says that the Mac's power adapter must be plugged into a power outlet if the Mac is a notebook.
It should be noted that as of press time, there was no mention of the firmware update on Apple's website and only a couple of users have reportedly seen the update turn up in Software Update, mainly those located overseas. [ View this article at AppleInsider.com ]
View 25 Replies
ADVERTISEMENT
Oct 15, 2008
Buying both the Mini DisplayPort to DVI adapter AND Mini DisplayPort to VGA adapter is pretty expensive...
I was wondering if I purchase the Mini DisplayPort to DVI adapter, will I be able to use a simple DVI to VGA adapter to use it as a VGA adapter also???
I'm not sure if the Mini DisplayPort to DVI adapter only sends digital signal or digital & analog signal.
View 24 Replies
View Related
Sep 12, 2010
I had to send my iMac 27" in for repairs and now I cannot connect the VGA to Mini DisplayPort adapter into the iMac. The other connections work (e.g ethernet and USB) but it looks the the Mini DisplayPort is off alignment with the aluminum enclosure. I know I'm not going crazy because it connected before I had to send it in.
View 1 Replies
View Related
Apr 22, 2009
I got the Aluminum MacBook late 2008 version and as most should know that the macbook comes with a Mini-Display Port. Today i went to buy a Mini DisplayPort to DVI Adapter because all my monitors at home have the DVI slot. I hooked it up and everything works fine as it should be. But next week i have a presentation to do in University and apparently my uni only have the VGA slot available, so therefore i want to know if it would work by hooking up my macbook with the Mini DisplayPort to DVI Adapter, then use a DVI-D to VGA adapter and finally a VGA cable to the Projector for the presentation?
View 4 Replies
View Related
Mar 16, 2010
I am trying to get my projector to display movies, tv, etc. from my MBP. I got the Mini DisplayPort to VGA Adapter but it doesn't seen to recognize any connections going out to the projector. It does not come up with the "mirror the display" option in the displays section of the system preferences. Is there a way to troubleshoot the Mini DisplayPort to see if it's working? I downloaded the firmware patch with the Mini DisplayPort to VGA Adapter hooked up to the projector but it was unable to install it since it said that the Mini DisplayPort to VGA Adapter was not detected! I'm thinking that there may be a malfunction to the Mini DisplayPort... Is there any way to check it? I tried 2 different VGA cables. The only thing left would be an issue with the adapter.
View 7 Replies
View Related
Jul 9, 2009
I have a couple end users who have the newer MBP's with 30" monitors using the Mini DisplayPort to Dual-Link DVI Adapter. A number of them are experiencing issues with small, roughly 1" long by 1 pixel high, horizontal lines that flash intermittently. Has anyone else experienced this? Know of a solution?
View 3 Replies
View Related
Apr 29, 2009
Are there still flicker issues
View 4 Replies
View Related
Jun 10, 2009
Did anyone notice they raised the price of these? when i bought my laptop april they were 19.99 now there 29.99... what the hell is wrong with apple?
View 6 Replies
View Related
May 23, 2010
Im about to buy my first macbookrpro and I want to link it up to my 24inch monitor. Ive seen the Mini DisplayPort DVI Adaptor on apples website but it looks so short like 3-4 inches. Im not sure how anyone could comfortably link up their mbp to their monitor with that. I just want to be able have my mbp sit near my monitor on my desk, not the other side of the room. Can anyone tell me how long the cable actually is?
View 4 Replies
View Related
Feb 1, 2009
In a month or so I'm going to need to do a Keynote presentation with a projector. I have the new MacBook, so I need the Mini DisplayPort to VGA Adapter. It doesn't seem to be getting good reviews though (many saying it doesn't work for them). I will not be able to test it out with the project until the day of the presentation. Is there any other way to connect the MacBook to what I assume will be a basic projector?
View 4 Replies
View Related
Feb 23, 2009
I have a new MacBook Pro with Miniport connected to a Cinema 30 using the Mini DisplayPort to Dual-Link DVI Adapter. I upgraded from the previous version of the Macbook Pro w/built-in DVI and never had a problem.
From the moment I started using this new miniport adapter with the Cinema 30, I noticed intermittent graphic anomalies. Most of the time, discolored lines will start rapidly popping in and out across the screen - especially noticeable with dark backgrounds. Here are a couple of quick videos that visualize the problem.
View 4 Replies
View Related
Mar 18, 2012
I just got a displayport to dual-link dvi adapter for my 2011 mac mini. Using a HP LP3065 display, and it keeps flickering! Is there something I can do to make it stop? Does the adapter have firmware that can be updated?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 5, 2012
Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Jul 3, 2012
I bought 2 new Macbook Pro 13' , 2.9 Ghz Intel Core i7, with 8 Go 1600Mhz DDR3, Intel HD Graphics 4000 512 MB, Mac OS X Lion 10.7.4 (11E2617).Â
I have connected a Mini DisplayPort to VGA Adapter in order to show presentations on different LCD projectors but no image appear.Â
The external monitor is detected but no image is shown. I have tried to change the frequencies: parts of the screen appears but no a correct image. I have the same symptoms with the 2 Macbook Pro. Using old Macbook Pro with the same Mini DisplayPort to VGA Adapter, the slides are showns normally.Â
I make a test with a Mini DisplayPort to DVI Adapter and with a Mini DisplayPort to HDMI Adapter and everythings works correctly with both adapters. Â
Info:
MacBook Pro, Mac OS X (10.7.4)
View 14 Replies
View Related
Jul 4, 2012
I have a MacBook Pro 2012 (Lion) and am connecting to my monitor via the mini displayport and a VGA adapter. This worked fine for a while, but now is intermittent. It's not the cable or the monitor as I have tried with several and get same results. The port works fine with an Apple monitor and no adapter. I've seen several threads on this, but no solutions other than starting up with monitor plugged in which I've done.I updated the OS and it worked fine yesterday, but today not working again.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Apr 13, 2010
The specification sheet for Apple's new line of MacBook Pro notebooks states that HDMI output is possible using an optional Mini DisplayPort to HDMI adapter, hinting that Apple could release a first-party solution [Update: New ports support audio output].
The bullet point is included under the "Pure digital video output" section of the technical specifications for Apple's new MacBook Pro machines. It advertises the functionality as: "HDMI output using Mini DisplayPort to HDMI Adapter (optional)."
Apple does not make a first-party Mini DisplayPort to HDMI adapter, and there is no sign of one yet on the Apple store. Existing third-party options have been available since early 2009 for under $20. Such cables allow Macs to be connected to nearly any HDTV with HDMI for video output.
Apple does sell first-party Mini DisplayPort adapters that convert the output to VGA and DVI. Both items cost $29 direct from the hardware maker.
In March, AppleInsider exclusively reported that Apple has created in its internal labs a Mini DisplayPort to HDMI connector. The alleged hardware was said to include technology that would allows Macs shipping with an updated Mini DisplayPort spec to channel both video and audio through the Mini Display port to the HDMI adapter, rather than just video.
Update: ArsTechnica confirmed that the new Mini DisplayPort supports both audio and video output on the new MacBook Pros. However, Apple also reportedly said it has no plans to release its own HDMI adapter.
The Mini DisplayPort became a part of Apple's LED Cinema Display, MacBook and MacBook Pro lines in late 2008. It replaces DVI video with a much smaller port. The new 27-inch iMac, introduced last October, only supports DisplayPort input. Unlike the Mini-DVI and Micro-DVI connectors common on previous generation Apple products, the port is capable of driving resolutions up to 2560x1600, which is commonly used on 30-inch displays.
Though the Mini DisplayPort technology was originally created by Apple, in 2009 the Cupertino, Calif., company agreed to license the interface to the Video Electronics Standard Association for its own DisplayPort standard. Prior to the agreement, Apple had to license its technology itself and made the standard free, as an incentive for rapid adoption.
Last November, the Mini DisplayPort standard created by Apple was officially adopted by VESA, which is also finalizing the DisplayPort 1.2 standard, which will double the technology's bandwidth capabilities to 21.6GB/s.
Last week, a new patent application suggested Apple is creating a new proprietary cable that could simultaneously transmit both USB 3.0 and DisplayPort data through one cable. The described technology would offer more functionality and greater data transfer rates via smller cable connector form factor.[ View this article at AppleInsider.com ]
View 39 Replies
View Related
Dec 24, 2008
i just bought the macbook alu. w/ the mini displayport, i tried to plug it directly to my samsung 1080p hdtv with the Mdport to vga cable but the tv didnt display anything. so i searched the web to find other solutions (Mdport to dvi -> dvi to hdmi cable), but for me that means buying 2 other cables so i was wondering if i could use this route: mini displayport to vga -> vga/dvi-i adapter -> dvi-i/hdmi cable -> 1080p hdtv? with this example, i would have to buy only the dvi-i/hdmi cable since I already have the vga/dvi-i adapter (my old MSI 6600gt one) so hows that sound? thx for giving me the answer ASAP cause I need to make a surprise presentation for my boy!
View 8 Replies
View Related
Jan 27, 2010
I just hooked the cable up, and I get the standard Purple Haze in space desktop that I have on my Macbook, but nothing else. No icons, no toolbars, nothing. The only time I was able to get anything to come up on my larger screen was when I went into Preferences, and Desktop and Screensaver. When I click on that, I did get a box to show up on my larger screen, listed as the Secondary Desktop.
How exactly do I get the larger screen to serve as my main screen? When I close up my laptop,the larger screen goes blank. I have no idea what to do, please help!
Another question I have is how the screen will look once I do actually get it to work. The reason why I ask that is because my larger screen is an old 17" Dell, the old 4:3 box kind. I plan on upgrading to a 20" plus HD display in the near future, but cannot at the moment, so the current 17" will have to do.
Anyhow, just curious if the screen is going to be completely wonky looking given the resolution that my Macbook will be feeding it?
View 2 Replies
View Related
Apr 29, 2010
So I've got a Macbook Air, a cheap 3d party miniDP to DVI dongle I just got from ebay that's connected to a DVI to VGA adapter which is in turn hooked up to an old-ish VGA monitor. The monitor isn't receiving any signals, so I'm wondering if I'm right in concluding that this setup isn't supposed to work?
View 2 Replies
View Related
Aug 9, 2010
will this cable (Mini DisplayPort to HDMI ADAPTER Display Port CONVERTER) work for xbox 360 to imac 27"
here is the link to it: [URL]
View 1 Replies
View Related
Mar 1, 2010
I have recently bought a 13" Macbook Pro and wanted to hook up an external display (an oldish acer 19"). I have a Mini Displayport to DVI adapter hooked up to a DVI -VGA adapter which leads to the display. I haven't got it to work yet. I have followed advice about closing the lid and using usb mouse and keyboard with no luck. The only thing that happens is that the screen on the laptop flashes blue for about a second after plugging in the Mini DisplayPort adapter.
View 2 Replies
View Related
Mar 9, 2012
having issues updating thier firmware? Software update shows the 1.6 firmware update needing done, I go throught the process, it reboots and never installs the firmware. System profiler still showing the old version. I tried downloading the file from Apple's website and manually installing and it does the same thing. I'm at my wits end here. It doesn't really bother me except that it constantly shows up in software update.
Info:
Mac mini, Mac OS X (10.7.3)
View 14 Replies
View Related
Oct 28, 2009
I have an ATI Radeon 4870HD graphics card which has a Mini Displayport and a Dual-Link DVI port.
I'm connecting this to two Dell U2410 which each have a Displayport, HDMI ,DVI and VGA ports.
I can connect one of the monitors straight to the DVI port, but what should I do with the other? I can't find a Mini Displayport to Displayport adapter for sale in the UK. But there are Mini Displayport to HDMI adapters and Mini Displayport to DVI adapters available.
Also, would it be best to have both monitors on the same connection? If i go the HDMI route should I buy a DVI to HDMI adapter for the other port? Or have both on DVI? Will there be a visible difference between the monitors if they're not on the same type of connection?
View 7 Replies
View Related
Dec 18, 2008
I just got my crazy new DisplayPort to Dual-Link DVI adapter in the mail today, 2 months late. I must be one of the first.It's a pretty crazy adapter. 5 feet long with a sizable box on the end, requiring power via a vestigial USB connector. It works fine visually on my 30 inch Cinema HD display, but now my mouse cursor is jumpy. Every few seconds as I drag my mouse, the cursor jumps 5-10 inches, making it hard and frustrating to use.
View 4 Replies
View Related
Jul 19, 2009
Not sure if there is anything newer firmware than 1.02 but I need ~something~ to drive my new minty Eizo 30" on my unibody MBP
View 11 Replies
View Related
Oct 17, 2009
Was thinking of trying to run this through my Onkyo SR-805 receiver to my plasma: [URL] Is this the best option available?
View 5 Replies
View Related
Mar 3, 2012
Superdrive Firmware Update 3.0 fails each time, /Applications/Utilities/SuperDrive Update.app asks me to quit all apps and try again which I did but of no. I also retried with a reboot.
Info:
MacBook, Mac OS X (10.6.8)
View 1 Replies
View Related
Sep 3, 2010
I got a mini displayport to dvi adapter for my macbook pro 13". Then I have one of those dvi to vga converters (URL) that i used to use w/ my old desktop.
Will that work ok on top of the displayport to dvi adapter? I tried it on my tv (which only has vga and hdmi, no dvi) and it recognizes the display but I only get a black screen. I've had problems setting the tv up properly in the past, so it could just be the TV. I wanted to rule out it being the vga adapter though.
View 5 Replies
View Related
Apr 17, 2010
I need to get a Mini DisplayPort to VGA adapter for my new MacBook Pro, but I know there are much cheaper ones about than the ones Apple sells.
Ideally, I'd like a single cable (rather than an adapter to plug a seperate VGA cable into) for a little less clutter on my desk, but if there's no decent solution I'll go with the adapter. I know most people recommend (URL), but I'm in the UK.
View 11 Replies
View Related
May 29, 2012
I just recieved my Mini DP to DVI adapter so that I can use my second 23" Apple display. I just upgraded to ATI Radeon HD 5770 so now I have 1 DVI and 2 mini DP. I want to run 1 display off of the DVI and 1 off of the Mini DP. Both displays work with the DVI port but neither of them work on the Mini DP with the adapter.
I know that I need to upgrade to Snow Leopard for the ATI Radeon HD 5770 to fully function. I am waiting for the upgrade to arrive in the mail. Do I need to be running Snow Leopard for the Mini DisplayPorts to work at all or is there something I can fix before the upgrade?
2007 Mac ProMac OS X 10.5.8ATI Radeon HD 5770
Info:Mac Pro, Mac OS X (10.5.8)
View 3 Replies
View Related
