Have new MacMini... need to connect both a display VGA and a separate digital projector but there is only the HDMI to VGA port. Could I use the Thunderbolt port for that purpose, and if I can, do I need a special cable and connector to VGA?
Info:
Mac mini, Mac OS X (10.7.2)
I'm having difficulties connecting my late-2013 retina display Macbook Pro to my Viewsonic PJD5223 projector. I have a (working) HDMI to VGA adaptor as well as an HDMI to mini-displayport/thunderbolt adaptor, and I have tried using two methods to connect: Â
1. Using he HDMI port directly
2. Using the thunderbolt port through the HDMI/thunderbolt adaptor on the Macbook ProÂ
Neither method appear to working. My Macbook Pro screen begins to blink/flicker, as if connecting then disconnecting rapidly. During the quick flashes, sometimes I can catch a glimpse of successful connection to the projector because the display settings panel for multiple screens appears. Â
I know that my adaptors are working because I can connect my Macbook Pro to my HP monitor with either of the two methods. I can also connect my PC to the projector using the HDMI/VGA adaptor. The problem appears to be specific to the retina display Macbook Pro or a more recent software update because I can connect to the projector using an older 2008 non-retina Macbook Pro.Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have a fresh install of Windows XP, service pack 2 on a boot camp partition on my macbook (13" first gen aluminum case) and a Apple LED Cinema Display attached to the mini display port.
I can't seem to make the Cinema Display the primary display (the "Use this device as the primary monitor" checkbox is always greyed out in the Display Property Settings tab). I also can't shut the macbook lid and continue to use it closed (with kb, mouse and monitor attached) like I would when booting OSX.
Is there some other way to make the Cinema Display the primary monitor, so I can leave the macbook closed when booting into Windows?
I hooked up my macbook pro to a mini display port to a dvi -> hdmi to my tv no problem. However, when I hooked up the mini display -> dell monitor, I get nothing. The screen is black. The weird thing is that my macbook pro recognizes that a second monitor is plugged in... it just won't display anything
View 9 Replies View RelatedAs the title says, I need a new monitor for my old G5 as the old monitor for it went bust. Apple does not make the old displays that came with the unit anymore and the only available monitor is the new LED ones ? but they all come with mini display ports
View 3 Replies View RelatedSo our church just purchased a nice refurb iMac to use for media presentations during weekly worship services. We have a projector with a VGA cable, so I bought a mini display port to VGA adapter from apple so that we can connect our shiny new iMac to our big screen.
However, when we attempt to connect our VGA to our adapter, they don't fit together properly. It's like the screws on the VGA cable aren't long enough to screw into the adapter...thus, the cable won't stay connected to the adapter (it just falls out).
Someone suggested getting an S cable to replace the VGA cable, but Apple tells me there's no adapter to link the S cable to the iMac. I'm absolutely clueless...surely there is a way to connect my wonderful new iMac to the big screen.
Any ideas?
Can I connect both my new Mac mini and my old PC to a singe monitor?
Info:
Mac mini
You definitely can't use an iMac as a display monitor for a Mac mini
Info:Mac mini
I guess I can turn the question around and ask how many differnt ways are there to attach a monitor to a MAC MINI?
View 1 Replies View RelatedUsing a mac mini with the hdmi port to connect to an lcd monitor with a hdmi port?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.4)
I have an iMac G5 1.8 GHZ And a Mac mini intel core duo is it possible to use the imac display as a monitor for the Mac mini I am aware of software such as screen recycler that uses a firewire cable but id like to connect directly via VGA/DVI so it dont lag
View 8 Replies View RelatedJust a piece of info for those considering driving a 30 inch Monitor with the Mini: The mini-display port to Dual Link DVI adapter Apple is offering is not working. There are some other forums discussing this problem with the unibody Macbook pro. I've been using mine since Dec. At irregular intervals the screen becomes blurry (weird double lines all over), and the only thing that works is plugging back in or (more harmless if you have multiple projects up and don't want them to be scattered all over the screen) Control-Shift-Eject to put the display to sleep, then wake it back up after a few seconds with mouse or keyboard. This can be very annoying as sometimes one has to repeat it multiple times. Apple is aware of the problem, but has not come forward with a solution. I just don't want you guys to be disappointed in your new Mini with a capable graphics card...
View 19 Replies View RelatedI Late 2008 Macbook Pro. My needs have shifted lately, as I am now using it mostly with an external display. I ran it into my 23(?) LG 1080 LED monitor with no problem. I recently bought a Samsung 27' Syncmaster SA550 monitor. I am in love with it, however I cannot find a display size that fits the monitor. I am currently running the 1080p resolution setting on my computer but it is easily 2-3 inches too small. And with overscan its too big to see my menu bar and dock at all. Running at a 24-25' screen size is still much better than my 15 inch macbook pro screen, but it would be awesome to use all of the 27 inches of this monitor. I have been unable to find a working setting, if there is a trick, or a way to setup a custom size As well I am running this as the sole display (not dual screens)
Info:
MacBook
Pro, iOS 5.1, External Display: Samsung SA550
i have 2 LCD's hooked to the new Mini as such:
1 going mini display port to DVI adapter to DVI on 19" Monitor (standard monitor)
1 going mini DVI to DVI adapter to a DVI to HDMI on 52" LCD (Samsung TV)
i just sold me iMac and switched to the Mini not only to be able to hide the Mini which i couldn't do with the iMac but also when i watch a movie full screen on the 52 i was never able to turn off the iMac monitor and would have to cover it with a towel so that it was dark in the room except for the 52 showing the movie.
my thought was that with 2 monitors separately hooked up to the Mini that i could solve the turning off the second monitor problem as they would now both have power buttons. besides making it dark in the room i also like to have the monitor off and so that i can have Plex on the 52 always in full screen mode so my wife can just hit "Watch Plex" on the logitech remote and the TV and Stereo switch to the proper inputs and away she goes to watch whatever without having to touch the computer which when both monitors are on works perfectly.
Soo...I just picked up a mini to run plex and use as a media center. Hooking it up to my projector via VGA cable. When I set the display settings to the native resolution on the projector there is a small black line or bar down the left hand side of the screen. Not on the right but only on the left. why this would be happening?
View 6 Replies View RelatedI have a 15" unibody MBP bought in Nov '08.
Had been using the Mini Displayport > DVI adapter just fine with both HDTV and Dell monitor, BUT then all output has stopped completely!
No monitor is detected by the laptop (although the display does blink blue, as if it had detected it), tried different cables, different displays, using the Displayport firmware update, speaking to Apple, deleting the com.apple..plist files, etc
Edit: it also doesn't work in XP on Bootcamp
a way to extend the mini display port cable on the 24" monitor? I'm using it with a 2009 mac mini and want to put the mini in a cabinet which is too far for the standard connection. The USB easy, but I can't seem to find a solution for the display port.
View 14 Replies View RelatedI have my 09 mini connected to a Dell E177FP and I have the energy preferences set to turn the display off after 15 minutes. The problem is that the display never turns off. It just sits at the "check signal" screen as if it was not plugged into anything. How can I get the monitor to go into standby mode?
View 6 Replies View RelatedWith my 'old' Intel iMac using a Display Port adapter, my 24" LG Monitor would be detected correctly and worked first time. With my new 2011 iMac 27 using a genuine Apple mini DisplayPort adapter plugged into the Thunderbolt port, this same monitor now shows up as a generic VGA monitor and the range of resolutions is severely reduced - basically it looks terrible. I've tried disconnecting the cable, reconnecting, using the second Thunderbolt, changing resolutions, detecting displays, showing displays in the menu bar. All with no success.
Info:
iMac
My friend's laptop just broke completely beyond repair (trust me this cannot be fixed without sending it out to hp, who wont fix it either). But any way, his mom and him have come to the conclusion that they are done with PC's, and are making the smart move, and going to Mac. Now, they cant afford an iMac, or a Macbook, so I suggested a Mac Mini. They only have a Samsung monitor for their HP, but I just want to know if a Mac Mini can connect to a Non-Apple Display. Yes I know they need adapters which I will help pick out for them when they go to buy it. I think I have heard it can connect to Non-Apple Displays, but I'm not 100% sure.
View 5 Replies View RelatedI am thinking about bying a mac mini to replace my power mac G4, that has serious problems.
My monitor is a:
Apple Studio Display 17 (ADC)
Display Connector: ADC
Apple Display Connector port
and it has that proprietary connection and does not require a power cord
Can I reuse my current monitor in a mini mac?
How do I connect an ADC monitor to a mini mac Mini DisplayPort video out ?
I was wondering if there was any way to connect my macbook up to my tv through an HDMI by some combination of extra cable converters.
View 6 Replies View RelatedI have a Mac Mini w/windows 7 32 bit installed VIA bootcamp. Is anyone running [URL] this VIA windows on a Mac? I tried mini DVI to VGA, but my tv won't pick up the windows side at all and I can't get 1080p on the Mac side.
View 3 Replies View RelatedI have the cords connected but when i go into settings I see no option for video output i have selected "show mirroring options in the menu bar when available" but i see nothing at all...
Info:
MacBook, iOS 8.1.1
I can not figure out how to connect the power on the cinema display. It looks like it would plug into the back of the mini where the macmini would normally plug the power in. Not sure if I am missing something. I also do not know if I need to plug all 4 connections the video, usb, hdmi, and iguess what is the power plug in or just certain plugs.
Info:
Mac mini, Mac OS X (10.6.8), 2006 model
I have a new Macbook Air 13", 4GB RAM, 2.13Ghz, 256GB SSD.
I'm connecting the Macbook with the Apple Mini Displayport to DVI connector to a DVI cable to a Dell 2407 monitor with a resolution of 1920x1200. The resulting image is blurry. The fonts are blurry and drop shadows on the screen flicker quite badly. The resolution on my Macbook is indeed set to 1920x1200 to match my Dell 2407.
Does anyone know what the problem could be? Is the problem with the Mini Displayport to DVI adapter?
I know for a fact that the Dell LCD and the DVI cable work fine with my Windows 7 box. I have tried two different DVI cables as well.
I bought a MBA 13" last month and now I'm trying to connect an external monitor through a Mini Display Port-to-HDMI adapter and most of the times the display shows a message "No signal detected"...
I've tried all the possible combinations between the MAC and the Monitor but it would seem a random matter.
Info:
MacBook Air (13-inch Mid 2012), Mavericks 10.9.4
I'm just wondering what cables I need to connect my Alu Macbook to my projector.
Here is a picture of my Projector's ports:
So I have a Imac ( bought it like early last year ), and a vivitek h1080fd projector.
I went out and bought a mini displayport to hdmi converter, then plugged in my hdmi cable to both the converter and then to the projector...
For some reason either my mac isnt letting a signal through or the projector cant read it.
I can plug in my windows netbook fine via VGA to VGA, and the projector can catch the signal.
Any ideas?
How do you connect the air to a projector, what cable do you need.
View 4 Replies View Related