Mac Mini :: Fail To Install Windows On Bootcamp?
Jun 28, 2012
First I follow the boot camp assistant step by step, and my windows7 disk is connected to my mac.However, after it reboots, my screen turns black and the ''Non system disk, press any key to reboot'' appears.Now there is no respond when i press the keyboard, I have to reboot my mac by holding the power button.I have tried times and times, installing refit, using another disk but still cannot fail.
Info:
Mac mini, Mac OS X (10.7.4)
View 1 Replies
ADVERTISEMENT
Mar 9, 2010
I tried to do the bootcamp install of Windows XP SP3, and it failed for reason, not sure yet. Anyway, now the only way I can get my Mac to boot is to hold down the Option Key. Gives me a choice of the OS X hard drive or the OS X install DVD. However if I just turn it on and let it boot normal, it says not a bootable device.
View 2 Replies
View Related
Jun 11, 2012
Some days ago I went to upgrade my mac mini 2010.I downloaded the combo-updater, as this is my preference. I sometimes have trouble with the normal updater from software update.When running the install I get this message of error above. I tried doing it different ways, downloaded the updater numerous times to try again.I even REINSTALLED OS Lion from the original installer and started over with the same result, even allowing the installer to dl the update, as it asked to do so.So I completely started over with a clean re-partitioned drive and had the same result. I tethered it to my macbook pro 2010 in FIREWIRE TARGET mode and tried installing it that way, same result. I have also just let the Software Updater utility run and allow it to install the downladed update. That activity returns a "cannot expan" error message...End result: It will not for any reason install this update. This is a problem I have never encountered (in 25 years of using macs).
Info:
Mac mini, Mac OS X (10.7)
View 1 Replies
View Related
Apr 10, 2009
I searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies
View Related
May 9, 2009
Short version: Paritioned Mar 09 Mini to have a 32 gig partition for Windows 7.Formatted Partition 3 BOOTCAMP to NTFS, now only have Windows 7, no option to boot OSX. Is it recoverable without reloading from the install discs?I believe this is user error on my part. Actually, I'm quite sure of it.
I have been trying to get Windows 7 installed on my EEE PC 901 on and off since it came out with RC1. Keep on running into troubles. So I think, why not boot camp it with my March 09 Mini? There's plenty of space, I'll give it a nice little 32 gig partition, install Steam on it, get some Left 4 Dead action..Well Boot Camp goes fine. I set up a 32 gig partition. I put int the Windows disc when prompted. Fine.
It goes to ask which partition to install to. I of course select Parition 3, BOOTCAMP. Cannot install to this partition... um... Hrm. Well there's a format button. It will format that partition to NTFS. Okay, I went ahead and did that.
Windows 7 installs, no problem aside from having to update the Realtek drivers for audio. Install Left 4 Dead. Works fine. Even resync the BT mouse and keyboard so I can be extra lazy. I've had my fun though, and then I go to get back on OSX. It goes to a white screen, then loads Windows 7.
I'm doing something wrong. I look it up online. Oh, hit the options key or hold it to choose an OS. No recognition, an off-white screen, then Windows 7. Oh, I'm using my BT keyboard, it must be that. I hook up a USB keyboard. Nothing. Hold X to boot directly to OSX. Fine. Oops, same thing.
Now I'm thinking back to choosing to format Partition 3 from whatever it was to NTFS. But unless I am missing something, OSX should still be recoverable without having to reload everything, unless I somehow flummoxed the MBR, right?Someone slightly more savvy want to chime in?
Correction: My friend was just over and is a big Mac guy. First question was, "you did put the OSX disc back in to complete the process once Windows loaded, right?"Problem solved? It just finished with the drivers, restarting, and now holding the Alt key will bring up the option.So that was it? Wow. Sorry about getting riled up for apparently nothing. Another question as an offshoot, since this does seem to be working rather well, can I expand that partition later on without screwing up OSX? I really don't have anything installed on the Mac side aside from iLife, Office08, and Boxee.
View 10 Replies
View Related
Jun 1, 2010
I have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
View 1 Replies
View Related
Oct 3, 2010
my parents iMac 20" Core Duo is having issues. After bootcamp restarts the system I get an error on start up, a folder with a question mark shows up aswell as that prohibition logo How can I install Windows 7 on that machine?
View 7 Replies
View Related
Feb 22, 2009
you cant use a windows xp sp1 disk to install windows xp onto your mac using bootcamp.What i wanted to know is if i partition my HD then format it to a recognizable format for windows installation disks, would i be able to install windows xp sp1 that way?or would the same principle apply as bootcamp and sp1 versions of xp are incapable of being installed on macs?
View 6 Replies
View Related
Sep 3, 2009
Is there a way to install Windows on Bootcamp without it requiring you to enter the serial manually?
View 6 Replies
View Related
Dec 14, 2007
I bought the family pack for Leopard. I installed Leopard on my G4 laptop fine.When I tried tried to install on my G5 I got a fail to install due to a source problem (?)In any event I restarted from the Tiger hard drive and it's totally screwed up my computer. It tries to start and I get initial Apple logo for about 2 seconds then it locks up and I get a bunch of computer code.
Information:
G5
Mac OS X (10.4.9)
View 4 Replies
View Related
Oct 16, 2010
Well basically I tried to install Windows on Bootcamp, and long story short I have to completely reinstall OSX. When I put the Snow Leopard disc in, I try holding either Command-Option-Shift-Delete or just c, and neither methods work. It always tries to boot from the HD, in which case I just get the spinning circle for ever. Why wont it boot from the disc?!?!? I also tried plugging in an external dvd drive, and it still wont work....
View 15 Replies
View Related
May 6, 2009
I was trying to install Windows 7 via Bootcamp last night - all went well until Win7 started up - it wanted me to type a Username for the default user. However, I have a wireless keyboard & mouse, and these didn't appear to be recognised (I think I might have to pair them later??). I had to abort the installation by hard resetting. Any way around this, without buying a wired keyboard & mouse?!
View 3 Replies
View Related
Aug 30, 2009
do I have to install a 64 bit windows on my bootcamp mac pro partition? Will regular xp be unstable? Which windows 64 should I get? Xp or vista?
View 2 Replies
View Related
Sep 17, 2009
I've installed Windows 7 64x on my Macbook, now when I insert the Mac OS X disc that came with my Macbook I can install the Bootcamp64 file but when I insert the Snow Leopard disk to install Bootcamp 3.0 I can't install the Bootcamp64 or the 32 bit Bootcamp file. I really want the 3.0 version so that I can have the read capability for the Mac partition in Windows. When I try to install the Bootcamp64 it comes up saying "This installation requires elevated privilages. Launch the installer through setup.exe" When I run it through setup.exe however it comes up with the message saying that it Bootcamp64 is unsupported on this model. The same message would come up when I use the Leopard disks but I was able to bypass this by instaling it through the Bootcamp64 file found in the Apple drivers folder.
Can someone help me out here I need to get Bootcamp 3.0 installed, I think there are some 3rd party apps that can give you HTFS read capability but I don't want use those, I've looked at some they are horrible so don't suggest it!! Also I'm not a 64x fanatic, I'm using Windows64x because you need it to use 4GB ram.
View 4 Replies
View Related
Feb 4, 2010
I am trying to install windows XP via bootcamp. But I am getting disk error right after first installation stage of windows XP. I was installing on Fat32 partition. Before this I was running windows 7 but I need to reinstall windows XP as I needed to use a software that only installs on windows XP.
View 1 Replies
View Related
Dec 12, 2009
Okay this i7 iMac is barely a few weeks old and I went today to setup bootcamp and during the partition creation, I get this error:
The disk cannot be partitioned because some files cannot be moved.
Er...WHAT? I don't even know what to do about that one, but it sounds suspiciously like I have to completely redo my Mac which is not going to make for a good Saturday.
Any hints on what in the world would cause this? I haven't even barely used this machine to begin with.
View 8 Replies
View Related
May 28, 2010
I have a 27" iMac with an i7 CPU, 16GB RAM, 2TB HDD. It is running Windows 7 Ultimate x64 under bootcamp.
When I try to install bootcamp services it states "to install bootcamp services you need to running Windows XP SP2 or Windows Vista"
I then downloaded bootcamp services 3.1 from here:
[URL]
It clearly states Windows 7 support, and is for X64.
Yet when I run it, it gives the same error stating I need to using Windows Vista or XP SP2.
does one install bootcamp services on a 27" iMac under Windows 7?
View 3 Replies
View Related
Aug 12, 2009
its a mac mini, 160gb(148gb really) 53gb free, i want to make a 25gb partition for windows 7
View 20 Replies
View Related
Feb 26, 2012
I ve been trying to create a Windows Seven bootable USB drive using the Bootcamp Assistant. I tried to create it using an ISO of my Windows DVD in order to install it on my new Mac Mini. My problem is that I get an error: Your bootable USB drive could not be created, an error occurred while copying the windows installation files. My USB drive is 8G, and I‘ve tried with a 100G external HDD too... So its not a size problem. I also tried to format the drive different ways without any success...
Info:Mac mini, Mac OS X (10.7.3)
View 11 Replies
View Related
Apr 21, 2012
I have a Mac mini which has a bootcamp section of the HD for Windows 7 Home Premium. Everything works there, except I can't get on the internet. Internet is ok on the Mac OS side, but not the Windows side. How can I make the Windows side find the internet? The Windows network troubleshooting dialog tells me there is no network adapter.
Info:Mac Mini, Mac OS X (10.6.4)
View 1 Replies
View Related
Sep 16, 2010
Is it possible to install Boot Camp 3.0 or higher on Windows 7 64-bit when dual booting with Leopard? What I've been reading suggests I need the Snow Leopard disc for Boot Camp 3.0+ and Windows 7 compatibility, but I only have the Leopard OEM disc.
View 8 Replies
View Related
Dec 11, 2010
1. New 11" macbook air. Set up partition for Windows XP SP2 using bootcamp. Prior to the Windows install I made the bootcamp driver install DVD per the instructions.
2. Windows installed fine. In Windows, went to install the bootcamp drivers from DVD I made and get this message: "bootcamp requires that your computer is running windows 7" And then I can't install the drivers.
Is there a limitation to running Windows 7 only?
View 1 Replies
View Related
Mar 17, 2009
Just wondering which one will be best for me to install on my MBP for gaming in Bootcamp. Pros & cons of each?
View 5 Replies
View Related
Mar 31, 2009
im having problems getting the hardware drivers for the new MBP 15' 2.4ghz to install on windows. I've followed the instructions on the site.but when i put in the isntall cd it gives me two options. one being to install bootcamp/OSX (which i didn't want it to delete windows on that partition.)or it gives me the option to allow a macbook air to use my cd drive as it's own ( or something to that extent
i've tried searching the apple site and on these forums on help to this issue but no soloution yet.
View 4 Replies
View Related
May 6, 2009
I have an imac with Vista installed both on a Bootcamp partition and in Parallels.
Sorry if this sounds ridiculous but could anyone advise instructions on installing Window 7 on my imac?
I don't want to mess it up- ?
View 3 Replies
View Related
May 11, 2009
I have currently XP installed in Boot Camp and I have Vmware fusion installed in OSX. I can boot my XP partition via vmware fusion. Now the question is, when I boot the XP via vmware, I can boot from a Win 7 DVD and the installation starts. Can I just go on an install it in this way? The thing is that I'm not at home and only have a VNC session to my mac, so I can't install it in the classic way which requires a reboot
View 2 Replies
View Related
May 31, 2009
Is it possible to install Windows on its own hard drive or with Boot Camp are we forced to install it on a partition on the startup OS X disk? I tried to install it on an empty 250GB HD with Boot Camp, but when the system restarted to install Windows, it asked me to choose a CD ROM and gave me the option of 1 or 2. When I pressed either 1 or 2 nothing happens. It remains stuck on that prompt. By the way, I only have 1 CD/DVD ROM drive in my MacPro.
View 5 Replies
View Related
Jun 24, 2009
I just bought the high end macbook pro 13" (2.53 GHz) today and I have a question about which version of windows to install on the boot camp partition. I saw a couple of videos on youtube showing pretty smooth performance of GTA IV on a MacBook Alu 13" 2.4 ghz model using BootCamp Windows Vista SP1. I dont want to install Windows Vista SP1 just because of that video and I want to know which version could give me even better performance. Both official and unofficial windows versions of XP, 7 and vista are under consideration. I dont need windows for anything else, just for playing a couple of games.
View 4 Replies
View Related
Aug 23, 2009
I recently received My Macbook I bought without The Mac Restore disc. I plan on getting Snow leopard, but in the meantime I wanted to know If I can use bootcamp to install windows xp sp2 oem Cd that I purchased 2007 without the Mac disc? When I tried it displayed Mac os X cd as required.
View 7 Replies
View Related
Aug 23, 2009
I've installed XP SP3 for school use on my new uMBP but for some reason I cant the bootcamp drivers to install, I click setup.exe and it opens and says "The installer encountered errors before Bootcamp could be configured"
View 1 Replies
View Related
