Mac Mini :: (Fall 2010) Optical DVD Drive Doesn't Work?
May 26, 2012
I purchased this spring of 2011 and only used the drive to install the software. I had lots of other problems with kernel issues and was in and out of the Genius Store like a hen on an egg, but now I am trying to use the DVD drive and it doesn't work. It doesn't recognize any applications to open it, not Toast, not Disk Utility, and it has a hard time recognizing music CDs also.Not only does it not recognize it on the desktop, it simply spits the disk out. I purchased new DVD-RW and tried to write an .iso image to the DVD, and it won't work. Sad fact is that this is now past the warranty and I am stuck with this. The Mac Mini 2010 version was expensive, and the only reason I bought it was because of the drive because I didn't have one.
Here's what happened. I bumped my Mini fairly hard, and the audio immediately cut out. I was watching some streaming video at the time, and the video kept playing. I tried to restart. Beach ball. I turned the comp off and back on. Folder with question mark. After messing around with that for a bit, I tried putting my 10.6 DVD in and starting from that. It didn't work, but that doesn't matter since that problem fixed itself after a few restarts. The problem is that the DVD is now stuck in the drive and the Mini doesn't recognize the drive any more. The drive momentarily spins up at startup, but that's it. If I have to take it apart to get the disc out, that's fine. I have the tools and have done it before when I upgraded the RAM. I just want to avoid that if possible.
I installed os x lion on my 2010 13"macbook,it worked fine until 2 days ago. It was in the process of updating and froze, after letting it sit for hours, I powered it down when it powered back up I got the apple logo and spinning gear. Since that time I have tried pressing C,D(with and without my osx disc in the drive) no luck. Upon learning to press C,P,R, and COMM. for PRAM I would get a screen with options to repair/verfiy dics, reinstall lion, etc.. I tried them all again nothing has worked. I believe my os x disc is damaged that's why its not working. Currently I get the gray creen with the spinning earth and exclamation point that times out. I fear at this point I'm out luck until I get back to the states.
I have a Macbook pro and I'm running windows 7 as the operating system. I just started using Autocad 2010 on this computer, and for some reason, the "delete" key doesn't delete anything when I press it. I tried to set "pickfirst" to 1 (checking the box of "noun/ verb"), but it doesn't help. Setting them both to <0> and <1> don't make a difference, both options don't "delete" the selected object.
I have Microsoft publisher 2010, it seems like Mac can not open the DVD to run? Can you use Microsoft publisher on a Mac, if not what can I use to work in files I have created with Publisher?
So I have a MacBook Pro, and my Dad has a MacBook Air. I was wandering if I needed Wi-Fi to access the optical drive on my MBP through the MBA using remote disk
My little brother bought an old iMac G4 off eBay about six months ago, against the recommendations of my parents and I who told him he should save until he could afford a slightly better machine. He's been improving it here and there when his savings from lawn mowing and birthday has allowed and his latest investment was the 10.5 operating system. When we went to install on the G4, my brother was shattered to find that the machine wouldn't support it. I investigated and found the problem was due to the G4's 800mHz processor. Not a component he could easily switch out. So after a quick flick around, I found another G4 that I considered could actually be a legitimate investment, given the parts we had. The seller claimed that it was perfectly fine, only lacking a working optical drive and hence, also an operating system. Both of which we had.
The second G4 arrived last week and I successfully switched the working optical drive from the old G4 with the "broken" one. Just to make sure I wouldn't lose the screws holding it all together, I installed the "broken" optical drive into the old G4 as well. Then I went to install Leopard. The new G4 has a 1GHz processor and it recognised the Leopard install DVD at boot. It presented the loading screen with the Apple sign and the rotating loading wheel, but wouldn't progress past this. Every time we tried to boot from the install DVD, it would present this screen for around a minute and then the Apple sign would be replaced by a prohibited sign. The booting process never got any further than this. I talked to a few people and ended up installing Leopard via target mode, assuming there was something a little sus with the harddrive which would be resolved once the OS was in place. But wherever the problem lies, it still remains. The G4 now boots successfully from the harddrive and operates fine, but refuses to recognise the optical drive. Here is my chain of reasoning:
- The optical drive in the G4 is not at fault. We know this because it operated fine in my brother's first machine.
- The hard drive is not at fault. We know this because the OS installed and now boots and operates without problem.
- The OS is not at fault. We know this because I performed an almost identical installation (minus target mode) using the same install DVD only days before on a G5.
- My installation work is not at fault. We know this because I performed an identical installation of the "broken" optical drive in the old G4. An interesting side note: the "broken" drive is working fine in the old machine. It is not as broken as the eBay seller thought.
I don't know a whole lot about computers. Most of what I learn is from trial and error problem solving like this. My question is: where does the problem lie?
I installed a Kingston SSD drive in my 2010 mac mini. If I put the OSX install DVD (grey disc 1), the SSD is not visible in either the installer or disk utility.
The SSD is a Kingston 64 GB SATA 2.5-inch SSDNow V Series Solid State Drive. Cheap drive.
The funny thing is that before i started all this I restored a SuperDuper image of 10.6.4 from my old mini to the SSD using a usb to SATA adapter. Installed and it worked! The SSD booted OS X but the ethernet jack was not working.
Does anyone know of a workaround for installing OSX onto a drive that is not being recognized in disk utility?
I'd like to find a way to reinstall OSX using the grey DVD without having to remove the SSD drive.
i just posted this but i don't think in the right place as i have been assigned a ticket number and rec'd an email telling me my ip is logged..i hope they don't charge for advice! I'm a desperate woman with a small wallet at the moment. i have a ibook g3 running osx 10.4.2 toast titanium 6 and suddenly she is indicating there is no disc in the drive when i go to use toast and i realize it is not appearing on the desktop nor elsewhere just in ATA. it is neither reading nor writing from the disk drive. the optical drive isn't seeing it. i have tried rebooting and different disks but it doesn't respond. i am not a seasoned veteran here, I'm a layman. I do know when i look under ABOUT THIS MAC: It lists the following:
SONY CD-RW CRX800E: Model: SONY CD-RW CRX800E Revision: 1.3g Detachable Drive: No Protocol: ATAPI Unit Number: 1 Socket Type: Internal
We have i-Mac 20" with built in i-sight Power PC, one of last ones I think before the intel. We have had a few problems before with it powering down and going to sleep. Used to hoover dust out and that seemed to fix it.
Now it won't start at all. I have tried all the PRAM and various commands to re set various things but none of these work. We had a wireless keyboard and I have just tried a wired one but I do not think either are connecting as the tab key light does not come on, which it does when I tested the wired on on my lap top.
When it died it crashed with a cd in drive. I have removed this and replaced it with the mac install disk to try and run the disk check but the optical drive is not starting at all either.
All that happens on start up is the sleep light comes on, then after a few moments fan starts to whirl. I can't hear the hard drive - have tried to rock hard drive to get it to spin but nothing.
Just wondering whether worth trying to replace optical drive or is this being controlled by hard drive - hence its not working nor hard drive. is there any way to recover data if it is the hard drive that is dead? anything else I can try and replace to fix it? could I use an external optical drive connected via USB to start? I have tried to firewire but not joy their either!
I have dvds from Region 1 but my daughter has sent me some work of hers from the Uk. I only have 5 times to change the region and therefore my question is should i buy a 2nd optical drive and use that for region 2 and the original for region 1.
Ok so i have an early 2008 Mac Pro, that has been reformatted couple days ago. So when i install my softwares again and i realized some of the DVDs can't be read anymore, the drive just makes a certain sound every 5 secs or so and eventually it just ejects by itself. Now the weird part and the thing i just don't get is why it's only like that for certain DVDs.
For example, i was installing Ableton Suite 8 again, and there are 4 discs. For some reason disc 2-4 work but the Disc 1 doesn't read at all. And i know it's not a problem with the DVDs cause they work on my macbook pro and even my PC. And i tried to burn a copy of that disc 1 into a blank DVD and tried to run that to install and it worked, so it can't be any data issues or whatever with the DVD.
Is this a firmware issue? if so how do i fix this? I thought at first it could just be because i reformatted my mac recently and then this all happened. But i've reformatted my mac several times before and never had this problem. Or this is optical drive just laming out and its time to buy a new one?
But then again why does it work for some DVDs and not for others? It's just BUGGING me ALL DAY.
Are there any specifics I should know about the second drive bay? I'm planning on buying just a really fast CD-ROM drive to put in there - can I get any ole' one? I noticed that the Apple drive does not have a faceplate - does this mean I have to remove the faceplate from whatever drive I get? Are there drives available that already have no faceplate?
I never used Mac OS X with more than one optical drive - how does opening a drive work? Does the eject button open both drives? One at a time?
My next Mac will be a laptop, and I will NEVER need the Macbook pro's power. I just web-surf and listen to music mostly. I only use the optical drive to watch dvds. But I have a separate player for my much larger TV now. So for say 99 percent of the time, an optical drive would be unnecessary. But I would buy apple's separate optical drive; which I think is a good idea. On my present computer, a first generation Mac Mini, the DVD drive is obviously obsolete now, especially when it comes to Blu-Ray. But what if a like in 2 years a new optical format comes out, or at least a much faster version? If I had a Macbook I would be stuck, never being able to upgrade the internal drive. If the Macbook's optical drive was easily upgradable, then this would be a no brainer.
Anyone know of a way to satisfy the SecuROM DRM when your Mac doesn't have an optical drive? I've tried using Remote Disc, but SecuROM's too dumb to work with it. This is in regards to GTA: San Andreas installed from the GTA: Trilogy DVD. First person to tell me to fork out for an external optical drive gets an abusive reply (actually, anyone who suggests this will get an abusive reply).
My optical drive seems to reject everything i put into it. It shoes up in system profiler and about this mac, but when i try to put a dvd or cd in they will spin and make noises and then the computer will just eject em.
I have created a image of my macbook pro (2006), on a DL-R disk. (This was so that I can restore my mac without having to do any updates or having to download and install programs) However, the person who made the image for me is no longer available and as such I have no way to use the DL-R disk. Apparently the macbook pro 2006 cannot read DL-R disks. I know that apple has a networked optical drive feature for the macbook Air. Would I be able to use this feature on my macbook pro?
I'm not a total newbie with mac and computers in general, but I cannot get the one and only super drive to eject... yes, I have hit the eject button, it shows the eject icon in the screen and nothing... how can I get the thing to eject?
I have a Samsung external DVD writer model SE-S084 that I am really struggling to find the drivers for in order to use it with my macs mini. I know it is compataible but the Samsung website is next to useless in trying to find the right download
I don't know why, but just now, I tried to burn a few .mov files onto a dvd and it won't work, I get the following error. , and yes, the drive reads, but won't write.
I have a 3 year old 24" iMac (see sig). I recently discovered the optical drive is not working any more. It won't accept any discs and just spits them out. Two questions:
-I assume the drive can be replaced somewhere like the Apple Store. Does anyone know about how much that would cost?
-Are there any alternatives to replacing the internal drive, like buying an external desktop optical drive? If so, what's a good one to get?
When ripping CD's with my new iMac 20", occasionally a CD will start to initialize then it will disappear from the desktop. I can eject the CD using Disk Utility or even using the hard-button on the Mac keyboard but other than that it is as though the CD is not there. Then, when I put the CD back in again all is well and it comes right up. I have never had this problem with the same CD twice in a row.
Also the drive seems really picky - iTunes will hang when trying to rip a CD that is at all "well used" (OK I don't take care of my CD's as well as I should but they work fine in my Windows machines).
The internal optical drive (MATSHITA DVD-R UJ-846) for my Intel iMac (late 2006) stop working after listening to a music CD. I inserted another music CD and the drive will try to read the CD, but after awhile, it would eject the CD. I inserted the last music CD I listened to and it did the same thing. Then I inserted several other data cds into the drive resulting in the same problem.
Info: iMac, Mac OS X (10.6.7), 2.16 GHz Intel Core 2 Duo
First I wanted to upgrade my new mac mini with a Momentus XT but now I'm thinking about getting a "real" ssd + a FW800 drive for storage to have the huge speed boost of the ssd drive. Does anybody have this combination in his mini? What I want to know: How is the performance like of the external drive connected to FW800? Is it comparable to a standard internal hard drive?
