Mac :: MacBook And FireWire Audio Options?
Jun 14, 2007
I've been having a lot of problems with heat in relation to my firewire audio interface on my MacBook.Initially I thought it was my external monitor that was the main problem. Well, it does add some heat. The temperature raises about 5-6 degrees celcius and the fan speeds up to 2400rpm when idling. This I can live with.However, when connecting my firewire audio interface the heat and fan speed becomes unacceptable. The heat raises about 10 degrees, and the fan speeds up to about 5500rpm. After about half an hour of regular use, like browsing, the temperature goes up even more (as expected) and the fan starts blowing at full speed. And this by just browsing the web.
View 17 Replies
ADVERTISEMENT
Dec 13, 2006
I successfully installed XP via Bootcamp and my XP audio software Sampitude. I did also install the MOTU traveler using newest drivers. However, it does not comply perfectly. I was installed alright, but when using it, it doesn't work properly. MME seems to work, but doesn't. ASIO doesn't work at all.
Basically it crashes the program, but if you just unplug it, everything works fine again, using the internal audio.
View 5 Replies
View Related
Jul 19, 2008
The volume controls aren't working well. I'm using a M-Audio Firewire Audiophile external sound device. There seems to be a headphone level control on the left which sort of works (its continuous so you never know where you are in its range) and a "Level Controller" on the right which doesn't do anything to the sound yet it controls the sound bar in Sys Prefs/Sound. I downloaded the 10.4.11 driver from M-Audio.
View 2 Replies
View Related
Apr 13, 2008
There's a thread in the macbook pro forum about this (that I bumped) but I didn't realize it was the wrong forum so I'll post here too.Whenever I plug Firewire audio interface into my macbook , even with no programs running and the computer essentially at idle, the CPU temperature quickly rises several degrees and then the fan quickly ramps up to maximum. Nothing appears to be placing the CPU under load at this time (measuring temps and fans with iStat nano). Of course, if I do put the CPU under load, the temps get very hot, 80C
View 17 Replies
View Related
Jan 31, 2012
I'm looking for a hardware solution for my mid-2010 MBP w/ 2-4 audio outputs via USB or Firewire. On the software side, I want to have multiple media players open and playing simultaniously, but each output separately. I was told m-audio makes devices that allow this, but I am curious which may be the cheapest with this capability - or alternate manufacturers.
Info:
MacBook
Pro, Mac OS X (10.7.2)
View 3 Replies
View Related
Dec 28, 2010
I'm wondering if I somehow have a bad firewire chip in my MBP. It hasn't been able to work with firewire audio interfaces.
- I tried a Metric Halo ULN 2 which loses sync with it's audio. It will be fine for a few minutes with itunes but then becomes distorted and ringy as if it's lost it's audio sync.
- Random kernel panics while using Logic 9, Garageband 11 with an Apogee Duet - all software fully updated. One time it froze while not doing anything - logic was simply open and sitting there. Using iTunes through the Duet seems fine.
- Pops and crackles using Presonus Firestudio.
I've tried wiping my software and reinstalling everything. I'm using a MBP 5,3 2.8Ghz Core 2 Duo 4GB RAM, Snow Leopard (10.6.5) with the latest updates. I'm going to try an Apogee One which is USB, but I'd really like to use a firewire interface. If there's something wrong with my firewire port, I'd like it taken care of. My machine is under applecare 3 year warranty. I don't think this is an easy thing to prove though.
View 1 Replies
View Related
Jun 10, 2009
That just makes me laugh, no body owning a 13" Apple laptop can have it all ehh.
I am now glad that i bought my unibody before the upgrade because I don't want to go out and spend $150+ on an audio device just to record a few tunes from my guitar.
Wow, I do love the new MBP, but can't apple just give it all to the 13" customers?
View 14 Replies
View Related
Jun 9, 2009
The new 13" MacBook Pro unveiled at WWDC makes room for its new SD card slot and FireWire 800 port in part by giving up a digital audio input port. Instead, the new model uses the same integrated mic and headphone port as the iPhone.Most MacBook users are unlikely to ever employ the combination digital and analog audio input port, which has appeared on all Mac notebooks for years. Podcasters are likely to use a USB mic like the Blue Snowball instead.However, lots of users are likely to want to use their iPhone or iPod touch combination headset/mic with their MacBook for video conferencing, and recent notebooks have added the additional pin required to support recording audio in addition to stereo headphone analog outputs and digital audio output.
View 39 Replies
View Related
May 12, 2010
Today I connected my Mackie Onyx Satellite Firewire audio interface to my 2.4 Ghz 13" Macbook Pro for the first time. After it had been running for a while, I looked at iStat Pro, and it reported a CPU temperature of 67C, which is about 15 to 25 degrees hotter than this machine usually idles. Now I've looked around a little bit and found that it's a known issue and associated with the Agere Firewire chipsets. Is there any solution for this? Does it make a difference if you use a daisy chain setup with an external hard drive in between the computer and the audio interface, or a repeater cable, or anything of that nature?
View 24 Replies
View Related
Jan 6, 2011
I've got the old Macbook model, circa 2006. My audio port's been broken for awhile now, and I recently got a 5.1 surround sound system. I've been playing music through my iPod, of course not getting the full surround effect, but would love to be able to hook the Macbook up to this system, be it in full surround or not. I've got the runaround from people at Radioshack, Best Buy, and was even led to buy this silly part which has done me no good: [URL]. Is there any way I can hook up my speaker system to the laptop via USB?
View 4 Replies
View Related
Nov 6, 2010
I have a 2010 macbook pro with snowleopard on it & have a 7 port ac powered usb hub hooked up to it. If I plug in 1 or more external hard drives into the hub & have them working together/transferring files, will there be a big slowdown?right now my hard drives are in just usb 2.0 enclosures. Would it be worth upgrading their enclosures to firew wire - esata? would I feel a performance difference?
View 4 Replies
View Related
Aug 11, 2009
did anyone ever got a chance to work with Saffire LE on XP using bootcamp? I searched all over the place, found some patches and solutions, but nothing works Just ridiculous.
View 4 Replies
View Related
Mar 14, 2012
I just got a 21.5 in. iMac and it's not recognizing my firewire audio interface. I have a 400 to 800 cable from the interface to the iMac and it's simply not picking it up.
Info:
iMac
View 3 Replies
View Related
Jun 7, 2012
I have, since a couple of years ago, used a nice little gadget called Kanex XD. It is simply an HDMI to Mini Display port, which allows me to play Xbox 360 on my iMac 27 ". It has always been clear as a bell!
When I decided to buy the thing, I was not sure if it would work with my current sound system. But it did! I run all the audio from my mac through a firewire audio interface called Focusrite LS 56 (from the audio interface I have Yamaha HS80M, info for geeks like me).
The audio has functioned really well through my Focusrite. But when I updated to the latest OSX (10.7.4), the audio from my Xbox only plays through my internal speakers. Otherwise, the sound works as usual. It's only when I play my Xbox through my Kanex XD, the audio goes through the internal speakers.
I guess it's something that happened in the new update that makes it impossible to play the sound from my Xbox through my audio interface. I contacted the Kanex XD support. They said that there's nothing they can do and that it probably have something to do with the update.
Info:
iMac, Mac OS X (10.7.4)
View 6 Replies
View Related
Feb 14, 2010
I am using an Apogee Duet with a late 09 Mac Mini, and have suffered through crappy graphics/general performance for some time. I really kinda shrugged this off until getting quite tired of it and did some searching around. After looking around I have discovered that I am not the only one who experiences this problem, and it has been pegged to core audio drivers. Which is odd.Disabling core audio through plists does indeed alleviate the issue it seems. Unplugging the Duet also alleviates this issue. When it is plugged in I see higher temperatures, slower overall performance and very choppy graphics performance, especially in expose and spaces. However this also affects the standard graphics in OSX.
View 3 Replies
View Related
Jun 25, 2009
Yesterday I took delivery of the following kit- http://www.dolphinmusic.co.uk/produc...firewire-.html
As you can see, it comes with the FCA202 Audio interface - http://www.dolphinmusic.co.uk/produc...io-fca202.html
I opted for the FireWire package as it has the most better quality mics. I got it all hooked up, but for some reason, my Mac is not recognising my new sound device at all. I was looking under the Sound part of the Control Panel, but nothing new would register. I checked the FireWire part of the Device Manager (appologies I forget the actual name of the application). The Firewire device was listed as "Unknown", if I was to remove the device and refresh, it would show nothing. So i've got the feeling that its been seen, just not recognised correctly.
I tried a few things to try and help my situation.
1) Disconnecting any other attached device
2) Rebooting several times
3) Leaving system off and unplugged for 10-15 mins
4) Updating all software
5) Resetting my xxxx (I forget the term, but it involved rebooting holding CMD, Option, R and P) - can someone confirm how I know if this was actually reset?
6) Going into Activity Manager and confirming the Audio driver is loaded
From what I've read, Firewire config issues can be common with Macs. I am running an 18 month olf iMac 20" with 4 gig ram. I've not used my FireWire port for a while, about 6 months ago I used a FW external HD which didn't have any problems with. Alas I don't have any other FW devices to plug in and test the port. The final thing I'm going for is to leave the system unplugged for 10 hours, which will be ready to check after work.
One thing I was thinking about though - would getting a powered FW hub be of use at all?
View 1 Replies
View Related
Dec 2, 2007
I am running an M-Audio Keystation Pro 88 MIDI controller via USB into Logic Express 7. I use Mac OSX. I'm going straight from the Keystation Pro 88 into the MIDI port of my MacBook Pro. I use a Pre Sonus Firepod as my audio interface (not sure if that's even relevantWhen I begin playing too many notes (especially after pressing the sustain), the piano (Garage Band grand piano .exs) starts to cut out. It sounds like BAD static, as if the MIDI were overloading Logic. I've tried changing the buffer size in audio preferences - it gets no better, only worse when I lower the size (32 being nothing but static).
View 1 Replies
View Related
Feb 24, 2009
I purchased a Mac Pro last Thursday after running a G4 350 MHZ machine for far too many years. But it had been such a good machine I focused on it and took my eyes off of technological progress. I thought the PCI buses in the Mac pro were just faster versions of the kind of PCI in the G4. The G4 was outfitted with a Revolution 7.1 sound card from M Audio and that fed into a Creative 6.1 speaker system (with internal amp). The sound was amazing. It was my hope that I'd be able to transfer this card to the Mac Pro and discover even higher quality sound. But before I even tried plugging it in I did some checking and found that PCI Express is an entirely different technology than PCI.
M-Audio has stopped making the Revolution even though they still have drivers for OS X 10.5 (for folks who put this OS onto machines with the original PCI slots, I suppose). So now that this dream has shattered I am wondering what are my options for being able to hear great sound from my new computer. The internal speaker is OK for the beeps and buzzes produced by an OS that wants to get your attention but it sounds horrible when you're trying to watch a surround sound DVD. I'd like to hear from any Mac Pro owners who have found a way to make their computers deliver high quality sound. I know the Mac Pro has optical in and out but have no idea how I could make use of this other than to plug into a rather high priced surround amp.
View 7 Replies
View Related
Jan 13, 2010
this will sound more complicated a setup than it really is..I have the following all connected together:iMac 21.5" (Late-2009 spec Denon AVR-3806 Amp Panasonic TH42PZ80 full-HD Plasma TVNow, for audio I have a simple optical to coaxial convertor which feeds directly into the input on my amp. With this I get full 5.1 surround
View 3 Replies
View Related
Aug 20, 2010
a Cable that DEF transfers audio over to the tv? Also here is my macbook pro model. Does it do Audio? Build 10FS69. Someone said there is a belkin one, is that right? Also, I just bought one from Monoprice and that f'in cable doesn't work
View 17 Replies
View Related
Apr 14, 2004
I hope I'm not double posting. Have any of the other new iMac owners experienced weird frequencies coming from external speakers that are connected to their iMacs?
For example: I have a set of studio monitors that are hooked up to my iMac using a firewire audio interface. Whenever I'm copying data I get an extremely high-pitched frequency coming from my speakers that sounds like my hard drive spinning. Also, whenever I'm scrolling or moving the magic mouse I get a loud buzzing coming from the speakers (especially when scrolling). None of this stuff happened with my previous 20" iMac C2D. I have experienced this issue with all three of the 27" iMacs that I have gone through thus far (due to the yellow tint issue). Does this sound like something I'm just going to have to live with. All of these high pitched frequencies are driving me batty!
View 10 Replies
View Related
Feb 16, 2009
I currently have my second MBP that I got from Macmall and both in a matter of two weeks have had similar issues. The first I managed to get returned and replaced, that is a seperate and complicated story in and of itself. This particular issue started with a boot up sequence that was taking about 5-6 mins. After going through the drill with Applecare thought I could restore using Time Machine. That's when I found out that the FW400 port no longer worked to power my Oyen Digital 250G FW drive. Any thoughts as to what might be the problem? This is my second MBP and Oyen Digital FW drive. I had them both replaced!
View 10 Replies
View Related
Jun 19, 2010
I have found that by plugging in my Apogee Duet firewire audio interface and ONLY WHEN AppleFWAudio was loaded there was a 10c CPU raise that was making my MBP (late 2008) hot!I wanted to monitor the power that was required for Duet to run and to see if the temperature rise was due to that, so:With Apogee drivers uninstalled (just to be sure its not their drivers related, which is notMBP on battery power with System Profiler opened (to monitor the mA required by the computer from System Profiler -> Power)
View 5 Replies
View Related
Feb 8, 2012
I just got the external harddrive "Seagate FreeAgent GoFlex USB 3.0 1TB" with a Seagate FreeAgent GoFlex Upgrade Kabel FireWire 800. I have neither a USB 3.0, nor a Firewire 800 on my white macbook (2008). I already know, that it's possible to use USB 3.0 with an USB 2.0 port, but I would like to use it with the firewire to spare the USB port for other devices. My question: Is there an adapter or cable to use the Seagate Firewire 800 with my Firewire 400 port? I don't know, where and what to look for.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 27, 2010
I have a somewhat old Seagate FreeAgent external drive (like this).
It has a switchable port controller, one has a USB2 and eSATA and the other has two FireWire 400 ports [URL].
Now, on the FW controller it says "Dual FireWire 400".
What is Dual FireWire 400? And does it implicate that I can use both ports together somehow and get FW800 by that?
View 5 Replies
View Related
Oct 12, 2009
I just got a Mac Mini (March 2009 model) and want to connect it via Firewire to my Sony TRV-22 camcoder. The camcorder has a Mini DV Firewire jack on it (I think this is called a 4-pin connector sometimes too). But on the Mac Mini, I can't tell if I need a 6-pin or a 9-pin. Can someone point me to a good cable so I can dump some MiniDV tapes into iMovie?
View 5 Replies
View Related
Jan 21, 2010
I googled it and it didn't help out as much. I have this Shure Mic and it has MIDI input and would like to have some kind of adapter to firewire. I know there is an USB adapter, but i would like to use firewire. It can be firewire 400 or 800. I like to record some songs for GarageBand.
View 3 Replies
View Related
Jun 22, 2012
can I put firewire connector 400 in the firewire port 800?
Info:
iMac, Mac OS X (10.7.4)
View 9 Replies
View Related
Mar 4, 2010
I have seen a few videos about mastering and gave it a try myself. It can be done by clicking the master tab, then going to the Input 1-2 column setting and then clicking setting - mastering, etc.When I first did this a few weeks ago, there were many options such as hip hop mastering, electronic mastering, etc.Now, when I do so, I have different - much less enticing options and have no idea where the good ones went.
View 1 Replies
View Related
Jan 13, 2011
I want to hook my Macbook Pro up to a Sony Bravia (not sure of the exact model). I went to the Apple Store, and was given these two items to hook it up. Moshi Mini DP to HDMI Adapter with Audio Support. Belkin High Speed HDMI Cable - 6 feet
We successfully hooked it up last night, and the video worked. I was told in the store that this setup would not transfer audio, so I already knew there would not be sound coming from the TV, rather from the Macbook instead. My Q is: What's the easiest way to get audio to come from the TV? I'd rather not buy external speakers to plug in, if I can help it.
View 20 Replies
View Related
