I have recently purchased a USB Ethernet adapter so I can setup NAT on lion server that runs on a MacBook. I was shocked when it blew away my DHCP Config after I set up NAT, but I stuck with the scope it chose and added the correct DNS and gateway settings.Whenever I start DHCP now, the logs tell me the Config cannot be found, and it blows away all of my modifications to DHCP. On top of that, it won't hand out any addresses.If I stop DHCP, the system logs start telling me that "natpmpd" has started, and then it begins to hand out addresses. The problem with this is, I can't make any changes to the DHCP settings it uses, which means my clients are now getting the incorrect settings for the gateway and DNS.Also, when I modify the Scope with DHCP stopped, the logs tell me it cant update the subnet because it was not found.
I have setup OS X Lion server to act as the DHCP and DNS server for my local network. DHCP provides gateway address and the local DNS server address.  DNS is set to forward to my ISP DNS servers. 'A' records and 'PTR' records have been created for the various servers on the network and I am able to resolve the servers via dig by name and address. I can also access the internet without issue. DHCP is handing out IP addresses to Windows clients on the network but I am unable to locate the machines with DHCP addresses in DNS either by IP address or FQDN. The windows clients are able to access the internet without issue. Looking at the DNS log there does not appear to be anything recorded when the DHCP address is allocated. Is there something special that needs to be setup either in DHCP or DNS that will allow DHCP to record the host and address details in DNS?
I have a Mac OSX Server (10.4) connected to a switch with various Airport Express terminals around the place. Macs can connect to the network wirelessly (with 128 bit WEP) and WIRED totally fine... but when I try and connect a windows PC either using wireless or WIRED... an IP address isn't assigned. Windows just says "Limited or no connectivity"...
The service shows running but will not give an IP address to Mac or PC. As the leases are running out on the machines they are not being renewed. I restarted the service and then the server. Then I reset the DHCP Client list.I turned on a computer lab so that they would all grab a new address.... none of them did. I logged on to a computer and told it to renew its DHCP address and nadda. If i assign a static ip they are fine
I've recently purchased my first Mac (the new 13.3 inch air model). I seem to be having a bit of a problem with wireless networking, though. It seems that my Mac will reconnect to my wireless network perfectly after resuming from sleep mode just fine for a few days, but after those few days, it will mysteriously stop being able to get an IP address from the DHCP server (my wireless router). My PC is able to connect to the network just fine and always seems to be able to get a new address, but the Mac just loses the ability. I have found that the only way I can get the Mac to start grabbing an IP address from the router is by going into the router settings and changing the RIP mode to a value other than what it currently shows. I generally try to stay in RIP_2B mode, but I change it to some other random value whenever it stops connecting.
I own a MacMini Server in my home network with Lion Server installed. I configured the DNS Service with a primary zone, providing nameserver (MacMini) etc. Server Admin tool create also a reverse zone 0.0.0.10-in.addr.arpa (my IP Range is 10.0.0.I own also an Airport Extreme Base Station (4th Gen) acting as DSL Modem, DHCP and NAT and creating 2 Wireless networks (private and public network) and it's correctly set up for internet access... In AEBS settings the DNS Servers are 10.0.0.3 (MacMini) and 8.8.8.8...With these settings everyting works fine but all the devices (other Macs, windows PCs, etc.) cannot ping each other... The only machine they can ping is obviusly the MacMini because in the DNS settings i punt manually a machine (A) record...
My question is: is possible to setup Lion Server to dinamically update DNS records using AEBS DHCP entries and reservations ? If possibile i don't want to add all the record manually and I don't want use the AEBS only as an access point...
Info:Mac mini, Mac OS X (10.7.3), Media Center + TM Server
I am having several problems all started when I migrated from my old Mac Pro to my new one, I would like to re-install the OS so it is clean, but I don't waant to loose all my Apps.Â
If I use the re-install through the front button double press will this overwright everything?Â
I'm turning my old white imac into a bedroom plex viewer (it will eventually become a kitchen computer) and I want to do a clean install. This was my primary workstation for years before I got my Mac Pro and its just loaded with crap, all of which I've backed up to sort through later
It currently has Tiger and I want to upgrade to Leopard (I bought a family pack for it and my powerbook). I have a bootcamp XP partition which I would like to keep and not destroy. Can I do a clean install except for the windows partition? Or will doing a clean install destroy bootcamp.
I have heard that your firewire port can get fried by using certain faulty pieces of gear. It hasn't happened to me, but the thought kind of scares me. Does anyone know if there is a way of preventing this from happening? If it did, would AppleCare cover it?
I have a server in our DMZ that connects to Active Directory LDAP server (non-ssl over 389) but no objects actually show up in the directory editor. I get a green light in my Network Account Server, but queries against LDAP return no results. My end goal is to be able to dictate to Profile Manager what LDAP groups are allowed to enroll devices. I tested on our internal network on a test server and get the same results. Anyone have any luck connecting a Lion Server to LDAP and actually being able to view and utilize users and groups?
When we share internet connection through ad-hoc wireless network, each individual connecting to our network will be assigned with an unique IP Address and other required fields will be filled with proper data(Gateway and ..).
I used this feature to access my iPad through wifi, and had no intention of sharing an internet connection. Now that I don't have an internet connection to share, my computer doesn't give any IP to my device, therefore my computer is unable to see my iPad on the network.
I also tried "Create network" feature of mac, but again, since IP addresses have been assigned by self, I'm not able to see my iPad on the network.
Having trouble on my mac while trying to connect to the internet using the built in Ethernet.
It says under network: Built in Ethernet is currently active. Built in ethernet has a self assigned IP address and may not be able to connect to the internet.
I hit the IPv6 and/or DHCP and it locates a IP just not a router number. Is this what is stopping it from connecting? Please help as I have an AP test I would like to study for....
When I make connection with my router I do not have internet, but I go to my network options and I click TCP/IP and then "renew DHCP-lease". The "Router" number change from 192.168.2.1 to 192.168.3.1, and then my internet works. But if I have to restart my mac for some reason, it jumps right back to 192.168.2.1, and i have to click "renew DHCP-lease" again. I have this on my both Macs (MacBook unibody allu, and MacBook white and also on my iPhone).
I have installed Lion Server with Web and Profile Manager services. When I log into the profile manager web page I receive the message "Not Found The requested URL /wiki was not found on this server."Â
I recently updated my Server running 10.7.0 to version 10.7.3 and single-sign-on no longer works for my users. The 10.7.3 Lion Server System is bound to our Active Directory Server running on Win2003 R2 Server. I tried un-binding and rebinding the system but.. no luck. When a user now tries to login to our shares via AFP with SSO credentials they recieve the message Â
I can run the id command from terminal on the OS X server and it is seeing AD users. Unfortunately, no one can log into the server shares via AFP with an AD user.Â
I am desperate for help because whatever I do I cannot get my own certificates to work. When I first set up Lion Server a so-called Intermediate CA and a corresponding SSL server certificate was automatically installed and that works fine. Now, I wanted to create my own Certificate Authority (CA) and a leaf SSL server certificate.[URL]First I created my own CA, and then I created a new certificate with the Server App (ID type "leaf", certificate type "SSL server". (see screenshots below), and I had it signed by my own CA. When I checked the certificate it said "valid".Next, I exported the certificate from the keychain (as .p12) and then I went to Server App's "Import a certificate identity" to drag and drop the certificate onto the window. So far so good.
When I opened the list of certificates (Server App -> Hardware -> SSL -> Edit ) the new certificate showed up once, and after the Server App had tried to install the certificate it simply did not show up any more. I have copied the important parts of the certificate below (private parts have been cropped).The common name and the DNS name are "myserver.domain.private", and yes, DNS is working fine.(I stopped started services and re-booted in between creating and importing the new certificate.)Â
I don't understand how it happened, but a school I work with has had the SUS rip through 80Gig in a few days (Snow Leopard Server 10.6.8). Same as with my home server (Lion Server 10.7.3).
Since installing Filemaker Server 12 on our Lion Server 10.7.3, the Webmail is no longer working. I know with previous installations of Filemaker Server I have been asked whether I wanted to keep the system version of PHP or install PHP which comes with Filemaker Server, but I don't recall being prompted about it on this occasion. Previously I had always opted to retain the system PHP.
[code]...
And from the WAN I get just a screen saying webmail is turned off and that I can turn it on by using the Server app on the server (It is already checked in the server app).Â
Info: Mac mini Server (Mid 2011), Mac OS X (10.7.3)
With any Unix machine, one can run at the command line:- apachectl -S This will show all virtual servers configured in Apache, and will break if there are any obvious problems in the httpd .conf files. It's very handy for testing a new configuration before restarting the server. With Mac OS X Server though, this doesn't work properly. Sure, I can run that command and see a virtual server or two, but with the introduction of the server Apache wrappers, the command line tools read a very different configuration than the `serveradmin` tool does.
e.g. Wrappers like:-<IfDefine MACOSXSERVER> .... </IfDefine> or <IfDefine WEBSERVICE_ON>
[code]....
ps. Running `sudo serveradmin stop web && sudo serveradmin start web` really compared to `apachectl graceful`; it's painfully slow and doesn't provide a way to test a custom configuration before attempting to restart.
not quite so dire if you clicked this wondering ??? And why is this bing posted on Server forum? Well it happens to be on a server and I am trying to iron out what happens when you completely trash the system and start over. This problem occured in a subdirectory on one folder. It (the triangles ->) are there for all the other folders. However, there is one folder I had on a backup (backup, meaning still being a previous version of Lion) that at one point that any group of folders I place into it. there is no browsing triangle that lets you go down furthur. Yes you can open the folder and go further in, so its not prefs that I am aware of. Â
At this level...Triangles Here Still? Triangles still here. (Must say in Cookie Monster voice if you've watched the "Cookies done yet" bit you might giggle or at least be mildly annoyed.)
If you browse from this part of the hierarchy you get the expected behavior...Triangles Here Still? Triangles still here. however if you open the folder here is what you get...Triangles Here Still? (uh oh).
[Code]...
Anyway, sorry for the "less professional" candor of this post, but I have kids and a wife, and they think I am boring at times, and I love them - and while I am struggling with this, I am thinking of them, and obviously not with them. Ok Universe, this is where I need you the most: I'm counting on you do to something or say something to make it all better. Ok...Go
I know this issue is kind of old, but there are so many flavors of it, that it is hard to find exact match. I've been having problems with single account, and it happens that this account has admin rights. Emails get pulled/deleted from user's mailbox within 10 secs after arrival. There are no other devices that may be pulling those emails, however, I've noticed something strange in the logs:
I don't know if this event is normal to run on server itself, but seems it runs only for this one account that I'm having problems with. There is no imap client setup on that server, and based on my time stamps observations I'm pretty much convinced that's what's deleting my emails.
The girlfriend and I are consolidating machines and want to try a software based approach instead of a plug and swap approach. My goal is to have only a Desktop + iPad and she have her MacBook. The issue is that we also want to keep it limited to one monitor, etc. on the desk but she is in grad school and will have need for the larger screen and keyboard. My question is can I set up her laptop to use a Mobile Account and assuming she logs off on that before going onto the Server, can she then log in to the Server desktop and use that Mobile Account locally there? So sometimes use the Mobile Account on the laptop, Sometimes on the Desktop. From my days managing a small network, this seems plausible but could also be fraught with problems.
We have some Education iMacs that I am having some problems with. XP can be fully up to date (except SP3) without any problems, they are connected to the domain, get an IP address, correctly sync time and process group policy settings at a computer level prior to the logon screen. All this is using the ethernet port (not wireless). As soon as SP3 is applied, they don't get a DHCP address until after login, therefore they don't sync time, process policies etc. If I uninstall SP3, back to working. I have reproduced this several times on different Macs (we have about 90 that are exhibiting this). Tried different version of bootcamp drivers.
If I reserve the address in DHCP, it doesn't make a difference. I seem to only have 2 options: 1. Manually enter an IP address in Windows (this is too time consuming) 2. Leave SP3 off (this means WSUS 3.0 SP2 won't work) Is there a newer ethernet driver outside the bootcamp package?
I am trying to get an older Macbook Pro running 10.5.1 online and it is not working. I'm currently using 3 other Macs on the WiFi network all running Snow Leopard, so I know that network works. I tried renewing the dhcp lease and I have it set to using dhcp and to configure ipv6 automatically, and there are 2 ip addresses under dns servers (I typed these in because they showed on my other MBP). I can't even upgrade the MBP because I have no ethernet cable and can't plug it in to update it. I can do to get it to work?Â
Running a Lion Server I have decided to move /Users and /Groups to another partition but now when I create a user or group no user or group share is created. Groups aren't that much of a problem since I can create those manually, but user homes.Â
I have in server.app pointed the new location out as sharepoint both users and groups point to the right place, but there's probaaby a terminal command to run somewhere here....
iTunes sees calendars we have set up in the office (those being shared, coming from iCal Server - Lion), but it will not sync that data to our iphones. I tried this at home where I have my personal computer's client iCal app get calendar data from our work server. It won't sync that either, though iTunes does see (in the sync list) the calendars.
