I have 1 tb data drive on server for student files but only using 40gb and says out of space. I cannot figure out where the space is located.
Info:
Mac Pro, Mac OS X (10.7.3)
I don't understand how it happened, but a school I work with has had the SUS rip through 80Gig in a few days (Snow Leopard Server 10.6.8). Same as with my home server (Lion Server 10.7.3).
View 3 Replies View RelatediTunes sees calendars we have set up in the office (those being shared, coming from iCal Server - Lion), but it will not sync that data to our iphones. I tried this at home where I have my personal computer's client iCal app get calendar data from our work server. It won't sync that either, though iTunes does see (in the sync list) the calendars.
View 4 Replies View RelatedAfter deleting windows 7, I went back into boot camp to merge partitions and after that operation completed, the 32gb of space that was used for the partition was gone. I tried using the disk utility to find second partition but can't, it only recognizes the partition that mac osx is on and says it is 120gb capacity when hard drive is 150 gb. I would like to format the entire hard drive and have it as one partition again
View 10 Replies View RelatedAs you know, there are several Office versions. The Professional and Special Media boast Exchange server support, whereas Home and Student does not have it. I wonder, what is it all about? Are there any special files that one can copy and enable this support? I could not find anything specific to this issue on my computer. Moreover, no direct reply from Google searches.
View 2 Replies View RelatedI had a goodworking SUS (10.6.8) working but the drive is getting full so i change the location of the files to another disk (in the xserve)and follow instructions from Apple (page 84 from the manual System Imaging) sudo cp -p /private/var/db/swupd/html /Volumes/My_Volume/My_Software_Updates_Folder/This works and i copy the files to a new drive. I also change the SUS so that theu host files for Lion clients url..works also, start SUS in Server Admin but when clients wants to connect i get an error that there is no SUS available and when i use the browser for an check i get een Forbidden error url...ForbiddenYou don't have permission to access /index.sucatalog on this server.Apache/2.2.21 (Unix) Server at 127.0.0.1 Port 80.
View 1 Replies View RelatedWhenever I make a window full screen, it always moves to the end of the spaces. I have 4 spaces, so my full screen windows always move next to the 4th space without me doing anything.
Info:
MacBook Pro, Mac OS X (10.7.3)
My system is MacPro 2009 with 10.6.8 server and Apple RAID card. Last week, RAID util just notified me of one drive is not viable, so i decided to replace the drive today. The configuration of my system is... There is an Apple Raid Card for HW Raid system Bay 1 = 640 TB drive with Mac OS X 10.6.8 server installed Bay 2, 3, 4 = 1.5 TB drives set up as RAID 5 below is what I did to replace the degraded Bay 4...Â
1. I shut down the system
2. replaced the corrupted drive with the new hard drive
3. tried start the machine again.Now my machine refuses to start up with the blinking question mark... I guess that the system fails to recognize the new drive or cannot find the system files...Â
4. So I put back the degraded drive...
5. The machine still won't start...
6. I tried to use the 10.6 server installation disk to boot up the machine to check if I can fix the system via disk util; but, everytime I do this, I got kernel panic... Â
7. resetting PR Ram didn't help, cannot boot up via safe mode as well (since the system file is not accessible now, I guess...).
8. booting via 10.6.2 server installation DVD still gives me kernel panic... Â
Why would my system corrupt by just replacing one degrade drive? The Mac OS X is not even the part of the Raid system... How am I supposed to fix this issue with out the installation disk?
Info:
Mac Pro, Mac OS X (10.6.8)
I recently attained a new client for IT support, and they have a xserve running Mac 10.4.11, for which the previous IT company supporting it did not give them the admin password. Also they don't have any restore discs of any kind. What I would like to do is wipe the server and upgrade to the newest version, because currently there are only two people touching the server, so now would be an optimal time to do the upgrade before it increases to more. But my main concern is getting access to the files of other users on the server so that I can copy them to an external hard drive, (i'm from the PC environment so essentially taking ownership of the files). What is the best way for me to do this in the Mac world?
The other thing I wanted to know is this server with the following specs, is even sufficient to support the newest version: [code]
Info:
Mac Server, Mac OS X (10.4.11), Mac Server
I'm running Mac OS X Lion Server 10.7.4 on a Mac Mini Server with a Promise Pegasus disk array attached. I'm using one of the logical drive of disk array to store the service data of Mac OS X. I had a power failure last night, and I had a problem with the automatic reboot after a power loss. It takes about a minute for the pegasus to start so the mac can't see the service data volume at boot time. Most services weren't able to start or lost their data. Is there a way to make the system/mac waits until the disk array is ready before booting?Â
Info:
Mac mini Server (Mid 2011), Mac OS X (10.7.4), Promise Pegasus R6
I admin a network of Macs that use a 10.3.9 based OS X Server machine as a backup server. There is an iDisk account the server uses for iDisk backups and once a month I run a manual full back to CD. Tonight, the CD backup failed to run since the boot volume was basically full. Upon further inspection, I learned the boot volume is 6GB on a 20GB drive. So, I'm looking to possibly replace the hard drive. I'm also considering replacing the entire server with more modern hardware but that's another discussion.If I were to replace the 20GB hard drive in the server now with say a 60GB (we're talking PATA/IDE here) what would be the best way of doing it? We're talking about the boot volume now so I would need to move the OS and MBR and everything to the new drive.
View 7 Replies View RelatedI have a server in our DMZ that connects to Active Directory LDAP server (non-ssl over 389) but no objects actually show up in the directory editor. I get a green light in my Network Account Server, but queries against LDAP return no results. My end goal is to be able to dictate to Profile Manager what LDAP groups are allowed to enroll devices. I tested on our internal network on a test server and get the same results. Anyone have any luck connecting a Lion Server to LDAP and actually being able to view and utilize users and groups?
Info:
Mac mini, Mac OS X (10.7.3), Server
I have installed Lion Server with Web and Profile Manager services. When I log into the profile manager web page I receive the message "Not Found The requested URL /wiki was not found on this server."Â
Info:
Mac mini, Mac OS X (10.7.3)
I would like to move my service data to the newly acquired Promise Pegasus.
Server.app -> Server Name: Settings: "Edit" button next to "Service Data" is greyed out.
Info:
Mac OS X (10.7.4), 8GB, 2,93 GHz Intel Core 2 Duo
I recently updated my Server running 10.7.0 to version 10.7.3 and single-sign-on no longer works for my users. The 10.7.3 Lion Server System is bound to our Active Directory Server running on Win2003 R2 Server. I tried un-binding and rebinding the system but.. no luck. When a user now tries to login to our shares via AFP with SSO credentials they recieve the message Â
I can run the id command from terminal on the OS X server and it is seeing AD users. Unfortunately, no one can log into the server shares via AFP with an AD user.Â
Info:
Xserve, Mac OS X (10.6.6)
I am desperate for help because whatever I do I cannot get my own certificates to work. When I first set up Lion Server a so-called Intermediate CA and a corresponding SSL server certificate was automatically installed and that works fine. Now, I wanted to create my own Certificate Authority (CA) and a leaf SSL server certificate.[URL]First I created my own CA, and then I created a new certificate with the Server App (ID type "leaf", certificate type "SSL server". (see screenshots below), and I had it signed by my own CA. When I checked the certificate it said "valid".Next, I exported the certificate from the keychain (as .p12) and then I went to Server App's "Import a certificate identity" to drag and drop the certificate onto the window. So far so good.
When I opened the list of certificates (Server App -> Hardware -> SSL -> Edit ) the new certificate showed up once, and after the Server App had tried to install the certificate it simply did not show up any more. I have copied the important parts of the certificate below (private parts have been cropped).The common name and the DNS name are "myserver.domain.private", and yes, DNS is working fine.(I stopped started services and re-booted in between creating and importing the new certificate.)Â
Info:
Mac mini (Mid 2010), Mac OS X (10.7.3)
Since installing Filemaker Server 12 on our Lion Server 10.7.3, the Webmail is no longer working. I know with previous installations of Filemaker Server I have been asked whether I wanted to keep the system version of PHP or install PHP which comes with Filemaker Server, but I don't recall being prompted about it on this occasion. Previously I had always opted to retain the system PHP.
[code]...
And from the WAN I get just a screen saying webmail is turned off and that I can turn it on by using the Server app on the server (It is already checked in the server app).Â
Info:
Mac mini Server (Mid 2011), Mac OS X (10.7.3)
With any Unix machine, one can run at the command line:- apachectl -S This will show all virtual servers configured in Apache, and will break if there are any obvious problems in the httpd .conf files. It's very handy for testing a new configuration before restarting the server. With Mac OS X Server though, this doesn't work properly. Sure, I can run that command and see a virtual server or two, but with the introduction of the server Apache wrappers, the command line tools read a very different configuration than the `serveradmin` tool does.
e.g. Wrappers like:-<IfDefine MACOSXSERVER>
....
</IfDefine>
or <IfDefine WEBSERVICE_ON>
[code]....
ps. Running `sudo serveradmin stop web && sudo serveradmin start web` really compared to `apachectl graceful`; it's painfully slow and doesn't provide a way to test a custom configuration before attempting to restart.
Info:
Mac Pro mid-2010, Mac OS X (10.6.4)
not quite so dire if you clicked this wondering ??? And why is this bing posted on Server forum? Well it happens to be on a server and I am trying to iron out what happens when you completely trash the system and start over. This problem occured in a subdirectory on one folder. It (the triangles ->) are there for all the other folders. However, there is one folder I had on a backup (backup, meaning still being a previous version of Lion) that at one point that any group of folders I place into it. there is no browsing triangle that lets you go down furthur. Yes you can open the folder and go further in, so its not prefs that I am aware of. Â
At this level...Triangles Here Still? Triangles still here. (Must say in Cookie Monster voice if you've watched the "Cookies done yet" bit you might giggle or at least be mildly annoyed.)
If you browse from this part of the hierarchy you get the expected behavior...Triangles Here Still? Triangles still here. however if you open the folder here is what you get...Triangles Here Still? (uh oh).
[Code]...
Anyway, sorry for the "less professional" candor of this post, but I have kids and a wife, and they think I am boring at times, and I love them - and while I am struggling with this, I am thinking of them, and obviously not with them. Ok Universe, this is where I need you the most: I'm counting on you do to something or say something to make it all better. Ok...Go
Info:
Mac mini, Mac OS X (10.7.4), Lion Server
I know this issue is kind of old, but there are so many flavors of it, that it is hard to find exact match. I've been having problems with single account, and it happens that this account has admin rights. Emails get pulled/deleted from user's mailbox within 10 secs after arrival. There are no other devices that may be pulling those emails, however, I've noticed something strange in the logs:
Jun 4 13:47:43 osxserver dovecot[173]: imap-login: Login: user=<xxxx>, method=CRAM-MD5, rip=192.168.0.123, lip=192.168.0.123, mpid=406, securedÂ
I don't know if this event is normal to run on server itself, but seems it runs only for this one account that I'm having problems with. There is no imap client setup on that server, and based on my time stamps observations I'm pretty much convinced that's what's deleting my emails.
The girlfriend and I are consolidating machines and want to try a software based approach instead of a plug and swap approach. My goal is to have only a Desktop + iPad and she have her MacBook. The issue is that we also want to keep it limited to one monitor, etc. on the desk but she is in grad school and will have need for the larger screen and keyboard. My question is can I set up her laptop to use a Mobile Account and assuming she logs off on that before going onto the Server, can she then log in to the Server desktop and use that Mobile Account locally there? So sometimes use the Mobile Account on the laptop, Sometimes on the Desktop. From my days managing a small network, this seems plausible but could also be fraught with problems.
Info:
Mac OS X (10.7.4)
Running a Lion Server I have decided to move /Users and /Groups to another partition but now when I create a user or group no user or group share is created. Groups aren't that much of a problem since I can create those manually, but user homes.Â
I have in server.app pointed the new location out as sharepoint both users and groups point to the right place, but there's probaaby a terminal command to run somewhere here....
Info:
Mac mini, Mac OS X (10.7.2), Lion Server
how to to reset or delete preferences of wiki server
Info:
Mac mini, Mac OS X (10.7.2)
Keep getting this error message when I open my Mail:Â The server returned the error: The server [URL]cannot be contacted on port 993.
Info:
MacBook Pro, Mac OS X (10.7.3)
Not able to find the lion software update service in server app
View 1 Replies View RelatedI have an OS X Server 10.6 setup with iChat and it works perfectly.This Mac is connected directly to the WWW, no firewall. I have an OS X Server 10.7 setup with iChat and it works perfectly EXCEPT for File Transfers This Mac is connected directly to the WWW, with a Netgear FVS336Gv2.I have opened all the correct ports for TCP & UDP and mapped them to my OSX Server 10.7 at 192.168.2.100Â
why should JUST file transfers do not work?This iChat OSX Server 10.7 is setup for people on the same server, using the same domain. File Transfer in iChat WORKS on the internal network OK?File Transfer in iChat DOESN'T WORK on external network?
Info:
Mac Pro, Mac OS X (10.7.2), Server
[code]...
This is the error log im getting back from the addressbook server error log. I noticed that the push notification is not working for the addressbook server.
Info:Mac mini, Mac OS X (10.7.3)
Reguarding Lion Server upgrade strategies: I have a macmini running 10.6.8 client serving Filemaker files, acting as File Server, and running a development web server. It runs as a normal non-admin user (nomad) utilizing a seprate admin account with admin privilages (guardua),for security.  I run multiple shell scripts, apple scripts and Filemaker scripts. Many of which which use hardcoded file locations. Some bash scripts run under the non priv user other under the admin account.  I also have a thrid user account which acts as rsync destination. Considering most files and programs are under the non-privileged user, I'm wondering how this user / admin account set- up will work when transitioning to Lion Server. (?) Will ther server app and scripts work with this set up?  Do I need to upgrade the non-admin user (nomad) to admin privilages? I'm user sure how users and admin users work under Lion Server.Should I upgrade to Lion then to Lion Server? --Or-- perhaps do a clean install of Lion/server then reload from timemachine? Start from scratch?
View 3 Replies View RelatedI can't seem to get the App Store to sell me Lion Server for my Snow Leopard Server.I'm trying to remain positive about this but I'm getting really that money isn't enough to make this happen.My experiencewith the App Store and Apple policies in general is its almost time to dump OS X and head back to Open Source.I put money in my iTunes account.I've done the 15 logins it takes to satisfy AppleID my account is complete and up-to-date in the store and the Support Communities.How do I buy the software and actually download and install it?
Info:
Mac mini, Mac OS X (10.6.8), upgrade to Lion
We are a small business with 2 mac mini's, 2 macbook laptops and another macbook pro laptop who is remote. (the remote laptop is not a deal breaker) We are beginning to have a nightmare with file storage, everyone is saving their own work to their own workstation and it's becoming difficult to share files etc. Basically, our requirements for a solution are:Â
- Sensible file server, allowing all on-site computers to use the server as a main file storage
- Something I can back all computers up with from time machine
- Useful to restrict certain users to certain files
- Useful to have external access to files when off site and via the likes of iPad etc. Â
I've looked in a NAS Raid drive and the OsX Lion Server and also the Time capsule and am just so confused at what to buy. Although the calendar sharing options etc. on the server would be useful, we can also do this via icloud. It's mainly the file access that is such a problem. Â I wonder whether a time capsule would be good enough as a file server - which we then back up to the cloud to secure the data.
