My daughter has a 3 year old 13" MacBook. We are upgrading the HD and would like to get an exterior enclosure for the old HD from this laptop. Would any 2.5" SATA enclosure work for this or are there other specifications I should be aware of?
View 9 RepliesHas anyone recently purchased an exterior case protection for their new macbook pro after the updated magsafe, if so, where do I find such a case that fits that update? I would like some feedback before I buy an incase or a speck and then manually trim the side, I'd rather not do that.
View 4 Replies View Relatedstorage on their 2010 MBA yet. There seemed to be lots of you doing it to the old one, but since they took the flash storage out of the enclosure
View 1 Replies View RelatedI'm looking to clone my 250gb HD over to a 1TB Western Digital 2.5 HD. I need to get an external USB harddrive enclosure, but most that I've seen say it has a 500GB capacity. Does anyone know of any cheap external enclosures that can get the job done? If so, can you provide a link?
View 3 Replies View RelatedDoes anyone know where/if i can get a 3.5" hard drive enclosure with firewire 800? I'm wanting it for backup for my macbook pro with time machine but i'm struggling to find one on the internet.
View 5 Replies View RelatedI'm looking to clone my 250gb HD over to a 1TB Western Digital 2.5 HD. I need to get an external USB harddrive enclosure, but most that I've seen say it has a 500GB capacity. Does anyone know of any cheap external enclosures that can get the job done? If so, can you provide a link?
View 6 Replies View RelatedI went to the applestore and, after purchasing one to one, was turned down for a data transfer from my old macbook pro to my new macbook pro. The "genius" recommended that I buy an external hard drive from newegg and get some screwdrivers and do it myself. So I did, except (I think) he told me to get the wrong kind of external hard drive enclosure and now I'm just really upset because I went through the process and got the hard drive out of the old macbook pro perfectly. What do I need to (re)buy to make this data transfer work?
View 6 Replies View RelatedI just purchused a Hitachi 500GB Travelstar internal HD to replace the 250GB HD and I have a few questions about the directions on cloning. Do you need a FireWire or USB enclosure for the new drive? Do can you use disk utility or do you have to use a program like carbon copy cloner or super duper?
View 3 Replies View Relatedim looking for an external enclosure that provides a firewire option for my macbook pro. The reason i am doing this is because my macbook will randomly eject my usb powered one for no reason. I have been reading that firewire does not have this problem. Im only looking for an enclosure as I replaced my stock 320gb hardrive with a 64gb ssd for my main drive. Preferably something in the 30$ range because im a poor college student . Anybody know of a good enclosure to go with?
View 5 Replies View RelatedSo I took the advice of 9to5mac (might have been my first mistake) and ordered the Toshiba Canvio Plus 1tb portable external drive with the goal of removing the 2.5' 12.5mm 5400rpm hdd and transplanting it into my 13" Macbook Pro.
[URL]
Unfortunately, the case has a (sort of) "unibody" design to it - there are no screws! I don't want to void the warranty by cracking the damn thing open.
I couldn't find whether or not it would fit. Ultraslim cases are harder to come by and more expensive than slim ones but my SD is an ultraslim. Then would a 12.7mm slot loading bezel fit on the whole thing?
View 10 Replies View RelatedI have bought a caddy from ebay some time back to replace the optical drive with ssd. It worked great. Here is my current configuration: SSD is in optical driveStock hard drive stays same as it was Now I am planning to upgrade SSD and install the drive in the place of stock hard drive instead of in optical drive (to take advantage of higher speed). But the stock hard drive doesn't fit in to the caddy that i bought. It worked great for SSD, but not the internal hard drive.
1) Can someone recommend suitable caddy model, (hopefully cheaper one). Or if i take out the screws from hard drive, it may fit into the caddy that i have.
2) My admin user is configured in SSD, which should not have any problem after migration. But my regular user is in stock hard drive.
Info:
MacBook Pro, Mac OS X (10.6.8)
I just got a new hard drive for my Black macbook 2,1 and no i need a good external hard drive to put my old hard drive. Do you guys have any recommendations, I'd like to get something that has firewire and usb.
View 3 Replies View RelatedI didn't have a chance to take a picture, but I can take one when I get home if needed.I never noticed this before, until I recently compared it to another Macbook, but my glass trackpad has a different feel, and unlike the other unibody macbook, the trackpad is not flush with the enclosure, and there is a small space on the left side, and an even smaller space on the right side.I don't want to take it into the store, if this is something that is normal, or within spec. Aside from this issue, the trackpad works without issue and everything else is great.
View 4 Replies View RelatedOkay so I'm thinking of putting a Intel SSD in my MacBook Pro 13" as soon the next generation is launched thus removing the SuperDrive in order to fit both drives. I haven't used it a lot of times but a few times I do need it and that's why I'm now asking this question.
What external DVD enclosure will work with the MBP SuperDrive if any and how will i eject the DVDs. I'm not going to shell out a 100 bucks plus shipping to Sweden for the MCE Optibay so that's out of question, however cheaper ebay alternative that ships to Sweden with reasonable shipping is okay.
Also while I'm here. I've been thinking about upgrading to 8GB ram kit however a friend of mine told me any ddr3 sodimm ram won't work which sounds weird but to be safe I'm asking if that's true? I'm thinking of buying a Corsair 8GB(2x4GB) 1333MHz kit.
I know the WD 1TB is bigger than the stock HDs in MBPs so was wondering if there was an external hard drive enclosure out there that was cheap and can fit either hard drive? Also what is everyone's thoughts regarding the WD Scorpio Blue 1TB? I bought one before but returned it because of strange sounds but my stock drive makes the same sounds so I guess it was a minor issue.
View 1 Replies View RelatedI just bought a MBP 2010 with the i7, and I'm trying to figure out what to do for external storage and backup since this is my first Mac ever. I have an Icy Dock with a 1TB harddrive in it, but it only has eSATA and USB ports. USB would not be preferable for trying to back up stuff. I was reading these forums about eSATA ExpressCards, but they seem really suspect (kernel panics sound terrifying) and a lot of work to get going. I was thinking about just getting another enclosure with FireWire 800, but can't seem to find any advice on good ones. I was wondering if I should just get a new external harddrive. I would like to get out of this without having to buy too much new stuff. Can somebody give a recommendation regarding whether I should get an expresscard, new enclosure, or new external?
View 3 Replies View RelatedI'm going to do my first HDD swap with my unibody macbook. I was all set to use Time machine, but I'm hearing that CCCloner or SuperDuper are a better idea. So, could someone link me a good deal on an enclosure I can stick my new drive into? OR, would I be ok just cloning to a partition on my 1TB external WD drive, then installing the fresh HDD, then cloning from external WD to new internal?
View 2 Replies View RelatedI have an old laptop hd which i have in an enclosure. The problem is the enclosure uses a Y-usb cable (think thats what its called - the cable that plugs into 2 usb ports on your comp) - you see where i'm going?!
Anyone know of an enclosure for a 2.5" sata drive which will work from just one usb port so i can use it with my soon to be macbook air?
Right now I have an i5 MacBook Pro with a 320 GB hard drive. I want to move that hard drive to my Time Capsule via a USB enclosure and use a 60 GB OCZ SSD hard drive in my MacBook. Do you think this is a good idea speed-wise? Also, does anyone have any experience with using iTunes or viewing videos with a hard drive plugged into a Time Capsule that's a few rooms away? I'm probably only going to use the wireless hard drive to listen to music and maybe move files to it once in a while. Would that be too slow? I would unplug it from the Time Capsule and plug it into my Mac to transfer big files or install software that's on the external drive.
View 8 Replies View RelatedI have a mid-2009 13" MacBook Pro that's having a strange problem. It crashed hard last night while I was typing something- just froze solid, couldn't force quit, then the mouse pointer stopped. Shut it down with the power button, started it again, got the "not permitted" symbol (circle with a line through it). Restarted with my Tiger emergency USB boot drive and the hard drive didn't show up in Disk Utility. Whoa! Restarted with a Cmd - Opt - P - R, no change.
I pulled the hard drive and put it in an external enclosure that I have. It mounted just fine on my iMac so I backed up all of my data, then plugged the drive in to the MacBook to see what would happen-and behold the MacBook booted just fine with the drive attached in the external enclosure! It worked perfectly! At this point, I had no drive installed in the MacBook, the MacBook's hard drive was attached via an external USB enclosure, and I booted the machine via the Lion USB rescue utility. I ran Disk Utility thinking that it would have all sorts of errors to report, but the partition showed no problems. I repaired permissions for good measures, then put the drive back in to the MacBook. Again, I got the "not permitted" symbol.
I tried booting from the USB rescue drive- when I went to Disk Utility the drive showed up but the system hanged when I selected it. I restarted with the Snow Leopard DVD inserted but it froze before loading the setup process (I assume when it was trying to mount a file system from the HD).
I run Windows 7 in a Boot Camp config on this machine as well, so just for fun I tried to start from the Windows partition. To my surprise, it booted just fine from Windows. On top of that, once in Windows I had no trouble accessing the Mac partition.
I decided at that point that maybe something had gone awry that I couldn't see and that I should repartition the drive. I put it back in the external enclosure, booted the MacBook from the Snow Leopard DVD, used Disk Utility to repartition the drive, put it BACK in the MacBook and tried to boot from the Snow Leopard disc again- and it crashed in the same place. I rebooted from the Lion rescue drive and tried to use Disk Utility to check the drive- DU crashed when I selected the hard drive.
As a last-ditch effort, I swapped out the RAM and tried again. No go. At this point, I'm really hoping it's a problem with the hard drive, but seeing as though it works great from an external enclosure, I don't know what to think. I don't have any other 2.5" SATA drives to test in the machine so I have to assume that other than a failed SATA controller, firmware, or other logic board problem, it must be the drive, right?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3), 4 GB RAM, 160 GB Hitachi HD
I have a SATA hard drive that works perfectly when connected through an external USB enclosure but whenever it's plugged into the internal SATA connector on my MacBook Pro I receive the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." any time I attempt to move or copy a file to it.
This doesn't happen with any other hard drive I connect internally, so I don't believe it's an issue with the internal cable.
I have made sure all permissions are set to allow reading and writing to the drive as well as selecting the "Ignore ownership on this volume" option in the Get Info panel.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
My dear baby, a 3 year old macbook pro died last week (way to young). Fried logicboard. Apple wants 1.550 dollars to fix it, so I guess it is gone for good.
My question is, is it possible to take out the harddisk, put it in an external enclosure and plug it in to another mac to get the files?? If so, what enclosure should I buy?It is a summer 2007 macbook pro.
i have just started my phd and am looking for a portable laptop. my requirements are pretty basic - lots of word processing, music, movies, and of course internet. maybe some photo editing. now first, i am a little mixed up if i should go for the macbook pro (basic 13 inch) or the newly launched macbook air (13 inch basic). pro is more powerful and cheaper than air. but then air is lighter and also has the faster flash memory! on the other hand, i am tempted to go for an SSD option with the pro. the price goes up of course by 315 $ or so. but in a way then the system could last me for a very long time given that the new polymer batteries last 3 times than normal ones. and its really the batteries/HDD that get worn out first.
on the other hand i am a little wary of SSD technology. it seems that the old HDD's are not that bad, and have some advantages over the SSD's. an internet search reveals that the 1st generation SSD's had a lot of problems. so does apple now use 1st generation ones or newer ones? moreover, is the SSD option more reliable or the flash drive one (with air)? basically am ready to invest a big amount provided i am assured that the system will last me for a long time to come.
for all running out of space,I have replaced the Harddrive on my macbook air Prozessortyp:Intel Core 2 Du Prozessorgeschwindigkeit:1.8 GH Anzahl der Prozessoren:1Gesamtzahl der Kerne:2L2-Cache:4 MBSpeicher:2 GBBusgeschwindigkeit:800 MHzthe sparepart Hard Drive i used
View 1 Replies View RelatedI have a MacBook Pro that is approximately 2 years old. It has always worked fine without any issues at all. Tonight I was installing some scanner software for a Fujitsu S300M scanner. After installing the software it asked me to reboot so I had reboot. At that time I came back a minute later to see just a black screen. I then after a couple more minutes decided to hold down the power button and turn off the power since nothing was happening.
I then pressed the button again and I saw the light turn on on the button that opens the screen but that is all. There was no startup chime, nothing. All I could hear is at the same time the light came on the optical drive makes it's noise that it makes at bootup. I have tried repeatly to start the computer. I have pulled both the AC Power and Battery for several minutes with still no luck. As I said just the light comes on and the optical drive makes noise and that's it, no startup chime, nothing. I don't think this should be related to scanner software and I'm assuming it was a coincidence that it happened then but any idea what could be causing this and can I fix it without a trip to the genius bar?
I have an aging mac. (macbook pro 15.4" core duo (2006)) I would like ot breath life into the machine by upgrading the ram. I am thinking of upgrading to 2 gigs from 1. What kind of a performance upgrade am I going to see?
View 3 Replies View RelatedI have so far had a few instances of this phenomenon w/ my 15 mo. old Mac. First, when charging my Mac at night in off-mode, it will occasionally turn itself on at some point evidenced by the power-on when it's opened. Then,I have had one instance of a shut-down by itself during use. It restarted w/ no problem. Next, the computer turned itself on with the cover closed and the computer had been off all night. I heard it start up, so I am sure. I do have AppleCare if I need to take it in.
View 3 Replies View RelatedWhich Enclosure and HD for my iBook G4? I need to find a good enclosure and HD to use with my iBook G4. I'm running Tiger, OSX 10.4. I need to use the external HD to boot the computer, and also need two Firewire and one USB connections, so I can connect other external drives.
I've been using this enclosure: Rosewill RX30-U2FA Aluminum 3.5" USB 2.0 (USB1.1) 1 port (4pin) FireWire 400 (1394a) 2 ports (6pin) External Enclosure
with this HD: HDD 300GB MAXTOR 16M ATA133 7L300R0 for over four years.
I need a new external HD, because our neighbor was messing around with the circuit breakers and flipped the switches, which cut our power and damaged my external HD!
I would like to know if it's possible to disassemble both this: http://www.bestbuy.com/site/olspage....=1185267958970 and this: http://www.bestbuy.com/site/olspage....=1185271084002 drive to remove from the casing and put in a Mac Pro. I've seen pictures here: http://www.carltonbale.com/2008/01/w...ing-the-drive/ on how to disassemble the case, but am wondering if it will work in a Mac Pro.
View 9 Replies View Related