I know the WD 1TB is bigger than the stock HDs in MBPs so was wondering if there was an external hard drive enclosure out there that was cheap and can fit either hard drive? Also what is everyone's thoughts regarding the WD Scorpio Blue 1TB? I bought one before but returned it because of strange sounds but my stock drive makes the same sounds so I guess it was a minor issue.
View 1 RepliesI'm looking to clone my 250gb HD over to a 1TB Western Digital 2.5 HD. I need to get an external USB harddrive enclosure, but most that I've seen say it has a 500GB capacity. Does anyone know of any cheap external enclosures that can get the job done? If so, can you provide a link?
View 6 Replies View RelatedCan anyone recommend a external box that can take 4-6 hard drives and do a Raid5 style setup? Preferably connected by firewire or esata to a Macpro.
View 2 Replies View RelatedI use stickies all the time, but there has to be something better out there! more features or better? Does anyone know a good alternative to the stock Stickies Mac app?
View 18 Replies View RelatedI'm looking to clone my 250gb HD over to a 1TB Western Digital 2.5 HD. I need to get an external USB harddrive enclosure, but most that I've seen say it has a 500GB capacity. Does anyone know of any cheap external enclosures that can get the job done? If so, can you provide a link?
View 3 Replies View RelatedDoes anyone know where/if i can get a 3.5" hard drive enclosure with firewire 800? I'm wanting it for backup for my macbook pro with time machine but i'm struggling to find one on the internet.
View 5 Replies View Relatedim looking for an external enclosure that provides a firewire option for my macbook pro. The reason i am doing this is because my macbook will randomly eject my usb powered one for no reason. I have been reading that firewire does not have this problem. Im only looking for an enclosure as I replaced my stock 320gb hardrive with a 64gb ssd for my main drive. Preferably something in the 30$ range because im a poor college student . Anybody know of a good enclosure to go with?
View 5 Replies View RelatedI just got a new hard drive for my Black macbook 2,1 and no i need a good external hard drive to put my old hard drive. Do you guys have any recommendations, I'd like to get something that has firewire and usb.
View 3 Replies View RelatedOkay so I'm thinking of putting a Intel SSD in my MacBook Pro 13" as soon the next generation is launched thus removing the SuperDrive in order to fit both drives. I haven't used it a lot of times but a few times I do need it and that's why I'm now asking this question.
What external DVD enclosure will work with the MBP SuperDrive if any and how will i eject the DVDs. I'm not going to shell out a 100 bucks plus shipping to Sweden for the MCE Optibay so that's out of question, however cheaper ebay alternative that ships to Sweden with reasonable shipping is okay.
Also while I'm here. I've been thinking about upgrading to 8GB ram kit however a friend of mine told me any ddr3 sodimm ram won't work which sounds weird but to be safe I'm asking if that's true? I'm thinking of buying a Corsair 8GB(2x4GB) 1333MHz kit.
I just bought a MBP 2010 with the i7, and I'm trying to figure out what to do for external storage and backup since this is my first Mac ever. I have an Icy Dock with a 1TB harddrive in it, but it only has eSATA and USB ports. USB would not be preferable for trying to back up stuff. I was reading these forums about eSATA ExpressCards, but they seem really suspect (kernel panics sound terrifying) and a lot of work to get going. I was thinking about just getting another enclosure with FireWire 800, but can't seem to find any advice on good ones. I was wondering if I should just get a new external harddrive. I would like to get out of this without having to buy too much new stuff. Can somebody give a recommendation regarding whether I should get an expresscard, new enclosure, or new external?
View 3 Replies View RelatedI am going on a gig for a company that has some systems that runs on Windows, I only have 128 GB on my computer, and with a few movies, pictures, Bento, MS Office, and a few utilities I only have 44 GBs available, I am afraid that if I install Parallels and Windows this computer will have almost no space for future files. Any idea of how much Parallels and Windows will occupy in terms of disk size? Any ideas of how to streamline OSX in order to leave more space available. I have used the search function, but I haven't found too many answers there.
View 16 Replies View RelatedI'm at a loss at the moment trying to find a 4-bay SATA enclosure that is compatible with the Highpoint RocketRAID 4322.
Could I get some recommendations?
Here's the RAID card:[URL]
I'm trying to find a hard drive enclosure that can take multiple hard drives, not in raid that has a firewire 800 interface.
I've not had any luck finding such a beast so far.
Does anyone know if one exists?
I'm going to do my first HDD swap with my unibody macbook. I was all set to use Time machine, but I'm hearing that CCCloner or SuperDuper are a better idea. So, could someone link me a good deal on an enclosure I can stick my new drive into? OR, would I be ok just cloning to a partition on my 1TB external WD drive, then installing the fresh HDD, then cloning from external WD to new internal?
View 2 Replies View RelatedI have a mid-2009 13" MacBook Pro that's having a strange problem. It crashed hard last night while I was typing something- just froze solid, couldn't force quit, then the mouse pointer stopped. Shut it down with the power button, started it again, got the "not permitted" symbol (circle with a line through it). Restarted with my Tiger emergency USB boot drive and the hard drive didn't show up in Disk Utility. Whoa! Restarted with a Cmd - Opt - P - R, no change.
I pulled the hard drive and put it in an external enclosure that I have. It mounted just fine on my iMac so I backed up all of my data, then plugged the drive in to the MacBook to see what would happen-and behold the MacBook booted just fine with the drive attached in the external enclosure! It worked perfectly! At this point, I had no drive installed in the MacBook, the MacBook's hard drive was attached via an external USB enclosure, and I booted the machine via the Lion USB rescue utility. I ran Disk Utility thinking that it would have all sorts of errors to report, but the partition showed no problems. I repaired permissions for good measures, then put the drive back in to the MacBook. Again, I got the "not permitted" symbol.
I tried booting from the USB rescue drive- when I went to Disk Utility the drive showed up but the system hanged when I selected it. I restarted with the Snow Leopard DVD inserted but it froze before loading the setup process (I assume when it was trying to mount a file system from the HD).
I run Windows 7 in a Boot Camp config on this machine as well, so just for fun I tried to start from the Windows partition. To my surprise, it booted just fine from Windows. On top of that, once in Windows I had no trouble accessing the Mac partition.
I decided at that point that maybe something had gone awry that I couldn't see and that I should repartition the drive. I put it back in the external enclosure, booted the MacBook from the Snow Leopard DVD, used Disk Utility to repartition the drive, put it BACK in the MacBook and tried to boot from the Snow Leopard disc again- and it crashed in the same place. I rebooted from the Lion rescue drive and tried to use Disk Utility to check the drive- DU crashed when I selected the hard drive.
As a last-ditch effort, I swapped out the RAM and tried again. No go. At this point, I'm really hoping it's a problem with the hard drive, but seeing as though it works great from an external enclosure, I don't know what to think. I don't have any other 2.5" SATA drives to test in the machine so I have to assume that other than a failed SATA controller, firmware, or other logic board problem, it must be the drive, right?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3), 4 GB RAM, 160 GB Hitachi HD
My dear baby, a 3 year old macbook pro died last week (way to young). Fried logicboard. Apple wants 1.550 dollars to fix it, so I guess it is gone for good.
My question is, is it possible to take out the harddisk, put it in an external enclosure and plug it in to another mac to get the files?? If so, what enclosure should I buy?It is a summer 2007 macbook pro.
After a frustrating morning spent discovering that the Incase Hardshell case does not fit my new MBP (despite what the guy at the Apple store told me), I ned to ask; Does anyone out there have a hard shell case that definitely does fit the new Magsafe connector?
View 24 Replies View RelatedI currently have windows XP installed by VMware Fusion on an internal hard drive. Is it possible to move the hard drive to an external firewire hard drive enclosure and still be able to run windows XP from my Mac Pro?
View 6 Replies View RelatedI want to clone my hard drive to use on my new one. i dont have an external hd enclosure, though, and would be happy if i didnt have to buy one. i was hoping i could make a clone onto my networked time capsule, then replace the hard drives and somehow boot from the clone from my time capsule.
View 1 Replies View RelatedI'm replacing my 320GB HD from my late '08 MBP with a new Hitachi 500GB unit.
It would be a shame to let the old HD go to waste, so I was wondering what SATA enclosures you guys and girls are using? Preferably something that will connect to my MBP using either Firewire 800 or USB 2.0. There are so many out there, I don't want to buy the wrong one and be disappointed with the quality. Thanks in advance.
I currently have windows XP installed by VMware Fusion on an internal hard drive. Is it possible to move the hard drive to an external firewire hard drive enclosure and still be able to run windows XP from my Mac Pro?
i bought a mini and a external hdd enclosure hopping that i can get my old hd back just for the pics when i when plug it in it doesnt mount to the desktop
View 2 Replies View RelatedI am looking to build my own external RAID setup and have it function as another set of internal ones. Is it possible to buy a computer case and put in a raid card and a power source and just run SATA cables to my mac pro?
View 4 Replies View RelatedThe subject pretty much says it. Which PCI card to add a External Serial ATA Enclosure to a Dual G5 2.0 GHz? Looking at Sonnet there are PCI and PCI-X SATA/ATA cards.I'm looking to expand my storage and this was a recommendation.
Information:
G5 Dual 2.0 GHz
Mac OS X (10.4.6)
I have just received a Firewire enclosure for a SuperDrive I bought months ago from the same company, Other World Computing. I was told that they would work together, but now that I'm assembling it, I find that the tiny holes on the drive (very near the edge of the drive, and only two on each side of the top, not the many more that the enclosure seems to indicate should be there. In addition, the holes in the drive and the ones in the enclosure don't match up. The enclosure also is very long for the drive, even allowing for room to attach the ribbon cable and other cables inside. I have now spoken with three different people at OWC, and nobody knows why this is or how to work out the problem, except to offer me another, less desirable enclosure that they assure me will fit the drive. (I didn't mention that the drive is an older model and that they no longer carry it.)
Well, I was assured that the one they have already sent me was just fine for my drive, so you can 't blame me for being a bit wary of the assurances for the other enclosure. The drive fits very snugly in the enclosure and doesn't seem to shift around. If I replaced a metal piece around the front of the drive that I took off to make it fit more flush with the front of the enclosure, it would be an even tighter fit. It wouldn't look as nice, but it could be done. My question is I whether I can dispense with putting in those screws, which are meant to secure the drive within the case and keep it from shifting around. (The screws meant to attach the back panel of the enclosure, the one with the internal cables, and the holes in the enclosure will fit together fine, because they are both part of the same thing.)
I'm looking into getting an external exclosure...should I stick with good old USB 2.0, or look into getting USB 3? Is it too new to get it? Anyone have one they are currently using?
View 5 Replies View RelatedThis is strange. I have a SATA drive that works when it's in an external USB enclosure but when I put the same SATA drive in one of the bays in my Mac Pro, the Mac Pro won't start up.Specifics:-I've reformatted the drive (with GUID and with Mac Partition Map), with no change in behavior-A different drive in the same Mac Pro drive bay works fine, so it's not the drive bay-the suspect drive in any of drive bay keeps the computer from booting (grey screen, no apple)
View 5 Replies View RelatedMy iMac G5 logic board has died. I am going to get a new iMac 27" core i5 when they become available and want to take my internal hard drive from my G5 and convert it to an external for use as a secondary back up device. I found the ultra ULTA40273 model at tigerdirect.com. Is this a good enclosure?
View 6 Replies View RelatedI'm looking to set up a 4+ drive external eSATA raid system (likely raid5). My biggest need is quiet. I've tried 2 boxes thus far including the 4big quadra that was supposed to be engineered for noise, but it had an annoying fan speed fluctuation and was actually much louder than my mac pro. I have a drobo and that is also too noisy. I'm wondering of anyone knows of a box or other option that is either fanless (ideally) or has one large super quiet fan.
View 24 Replies View RelatedI just purchased a new 3tb Seagate drive to replace a 2tb drive in an external USB enclosure, I can access, partition and format it using Parallels but can't even see it in Disk Utilities on Mac OS X 10.6.8...?
Info:
iMac (27-inch Late 2009), Mac OS X (10.6.8)
