I couldn't find whether or not it would fit. Ultraslim cases are harder to come by and more expensive than slim ones but my SD is an ultraslim. Then would a 12.7mm slot loading bezel fit on the whole thing?
View 10 RepliesI just installed a 160gb Gen2 Intel in my 15" macbook pro, and its flooring me with its speed. Amazing upgrade. All editors, designers, etc... should do this upgrade.
Optibay Alternative ----
Now I want to put another SSD in there for Raid0 or just the stock 500gb for now.. for storage.. but the cost of the Optibay is pretty high. I saw a link to an alternative, called USCaddy or something, I forgot. Can someone link that one in, and comment if its ok?
Slim Superdrive Enclosure -----
And what are people putting their old superdrives in? I want something slim lined, USB bus powered.. etc... Any comments on one that works really well and looks cool
I have just received a Firewire enclosure for a SuperDrive I bought months ago from the same company, Other World Computing. I was told that they would work together, but now that I'm assembling it, I find that the tiny holes on the drive (very near the edge of the drive, and only two on each side of the top, not the many more that the enclosure seems to indicate should be there. In addition, the holes in the drive and the ones in the enclosure don't match up. The enclosure also is very long for the drive, even allowing for room to attach the ribbon cable and other cables inside. I have now spoken with three different people at OWC, and nobody knows why this is or how to work out the problem, except to offer me another, less desirable enclosure that they assure me will fit the drive. (I didn't mention that the drive is an older model and that they no longer carry it.)
Well, I was assured that the one they have already sent me was just fine for my drive, so you can 't blame me for being a bit wary of the assurances for the other enclosure. The drive fits very snugly in the enclosure and doesn't seem to shift around. If I replaced a metal piece around the front of the drive that I took off to make it fit more flush with the front of the enclosure, it would be an even tighter fit. It wouldn't look as nice, but it could be done. My question is I whether I can dispense with putting in those screws, which are meant to secure the drive within the case and keep it from shifting around. (The screws meant to attach the back panel of the enclosure, the one with the internal cables, and the holes in the enclosure will fit together fine, because they are both part of the same thing.)
It look a LOT like the Macbook. It even has that glass screen cover. Edit: Look like it does not actually. Here's a better picture:
View 3 Replies View RelatedFrom the translated Engadget China article:
Model: X-Slim 320
Processor: Intel's Menlow platform, Z530, clock 1.6GHz, TDP for 3W
Size: 13.4-inch, LED backlight, 1366 � 768
Chipset: Intel Poulsbo US15W
Memory: 2GB DDR2
Hard Disk: 2.5-inch HDD, no SSD planned
Wireless: 802.11 a / b / g / n, Bluetooth and 3.5G
Ports: USB � 3, ExpressCard � 1
Battery: pre-loaded 4Cell, 8 Cell is said have 10 hours battery life
Weight: 1.3 kg
possible price: $800
I'm thinking of getting the new 13-inch MacBook Pro soon, but I'm wondering about cases and bags. I was looking around (not hard, and only online thus far), but I haven't stumbled upon and sleeves with handles. The Incase Sleeve Plus is still too big and bulky (strictly speaking, I mean appearance, not actual size and weight; one without a flap going over it, just a zipper).
I have a 15" MacBook Pro 2.5GHz (Penryn) model. I pulled a super drive from a 17" (A1229) MBP but it's the larger version. Never the less, it still kinda fits in my 15" MBP.
View 3 Replies View RelatedCurrently i own an xbox 360 Slim 4G model. I also own a copy of a game that needs about 16g of memoery so i cant store it on the xbox. Wondering if its possible to connect my xbox to my macbook pro and store the game on the computers hd and have the xbox 360 recognize it and still function through my xbox and tv. In essence as an external drive while still having full function.
View 1 Replies View RelatedI recently purchased a 17" MBP and need a case for it. I want more protection than a neoprene sleeve, but don't need a full-fledged work bag (I already have one). I really like the style and protection of the Booq Vyper XL2, but it has no shoulder strap. I am really afraid I would end up dropping it, as I usually have my hands full on the way to/from work.
I have just purchased a Toshiba Stor.E Slim hard drive, which I do not require for Time Machine back ups. Should I use the Tuxera NTFS driver, or should I format the hard drive for Mac? Is any benefit over formatting vs using the driver? I pretty much use Macs all the time, but there may be rare occasions when it would be useful to hook up to a PC.
View 2 Replies View RelatedI was thinking, for the next generation MacBook Air, would you want a slightly thicker (thickest part is 0.9in, tinnest is ~0.35in) laptop with a built in Superdrive, more ports, etc, or would you perfer that Apple moves away from this with a thinner computer (0.1in thinnest, 0.6in thickest), but with same limited ports.
I would actually perfer thicker with a superdrive, since I want an air but I want it to be like a MacBook but thinner. What do you think? Btw, this is assuming the regular MacBook does not change in size, since that would sway peoples opinions.
Hey guys, thought I'd like to share something that I received today. Been anticipating this product for a while now. If you are looking for a minimalist, stylish, customizable and professional-looking bag, look no further.Have a look at their URL I am specifically reviewing their Skinny Slim Bag; I have not seen other reviews online about this bag so hopefully this review is helpful.
View 2 Replies View RelatedI just got my PS3 slim few hours back and dont have extra money for a tv. Can I play the PS3 on my mac for games Is it have to do with HDMI out.
View 3 Replies View RelatedI am hoping that when they refresh the new Mac Pro that they refresh the apple keyboard to have black keys. I would love to pick one of these up,and maybe an all alum mouse ,i really don't know about the mouse but do you like to see black keys or keep the white?
View 17 Replies View RelatedI have the Wired Apple Keyboard and I'm wondering why it wont work with my PS3? People say it works with it but its a no go for me.
View 5 Replies View RelatedI am using a Kensington Slim Blade mouse with my MacBook and recently the track ball has stopped working (in any application). I tested the batteries and they are ok. The left and right buttons work ok, just not the track ball (it is similar to the one on the Mighty Mouse). I recently upgraded to 10.5.8, but it started just before that.
I'm having issues getting my new XBOX 360 Slim to connect to my dual-band Airport Extreme when using wireless n. I can get it to connect with n but my connection speed on the 360 drops to 1 or 2 mbps, even though the signal remains strong. I can see the speed drop of the 360 using Airport Utility on my laptop. All other devices on the network are fine. When I switch the 2.4 GHz band on the AE to b/g only, then the connection speed on the 360 shoots up to 54 mbps. That of course neuters the rest of my wireless n devices to g speed since most connect to the 2.4 GHz band due to the limited distance of the 5 GHz band.
Short of finding a solution, my next step is to try a different router brand. I'd rather stick with Apple, but have had more issues with 2 AE models than all of my other Apple hardware combined.
My daughter has a 3 year old 13" MacBook. We are upgrading the HD and would like to get an exterior enclosure for the old HD from this laptop. Would any 2.5" SATA enclosure work for this or are there other specifications I should be aware of?
View 9 Replies View Relatedstorage on their 2010 MBA yet. There seemed to be lots of you doing it to the old one, but since they took the flash storage out of the enclosure
View 1 Replies View RelatedI'm looking to clone my 250gb HD over to a 1TB Western Digital 2.5 HD. I need to get an external USB harddrive enclosure, but most that I've seen say it has a 500GB capacity. Does anyone know of any cheap external enclosures that can get the job done? If so, can you provide a link?
View 3 Replies View RelatedDoes anyone know where/if i can get a 3.5" hard drive enclosure with firewire 800? I'm wanting it for backup for my macbook pro with time machine but i'm struggling to find one on the internet.
View 5 Replies View RelatedI'm looking to clone my 250gb HD over to a 1TB Western Digital 2.5 HD. I need to get an external USB harddrive enclosure, but most that I've seen say it has a 500GB capacity. Does anyone know of any cheap external enclosures that can get the job done? If so, can you provide a link?
View 6 Replies View RelatedI went to the applestore and, after purchasing one to one, was turned down for a data transfer from my old macbook pro to my new macbook pro. The "genius" recommended that I buy an external hard drive from newegg and get some screwdrivers and do it myself. So I did, except (I think) he told me to get the wrong kind of external hard drive enclosure and now I'm just really upset because I went through the process and got the hard drive out of the old macbook pro perfectly. What do I need to (re)buy to make this data transfer work?
View 6 Replies View RelatedI just purchused a Hitachi 500GB Travelstar internal HD to replace the 250GB HD and I have a few questions about the directions on cloning. Do you need a FireWire or USB enclosure for the new drive? Do can you use disk utility or do you have to use a program like carbon copy cloner or super duper?
View 3 Replies View Relatedim looking for an external enclosure that provides a firewire option for my macbook pro. The reason i am doing this is because my macbook will randomly eject my usb powered one for no reason. I have been reading that firewire does not have this problem. Im only looking for an enclosure as I replaced my stock 320gb hardrive with a 64gb ssd for my main drive. Preferably something in the 30$ range because im a poor college student . Anybody know of a good enclosure to go with?
View 5 Replies View RelatedSo I took the advice of 9to5mac (might have been my first mistake) and ordered the Toshiba Canvio Plus 1tb portable external drive with the goal of removing the 2.5' 12.5mm 5400rpm hdd and transplanting it into my 13" Macbook Pro.
[URL]
Unfortunately, the case has a (sort of) "unibody" design to it - there are no screws! I don't want to void the warranty by cracking the damn thing open.
I have bought a caddy from ebay some time back to replace the optical drive with ssd. It worked great. Here is my current configuration: SSD is in optical driveStock hard drive stays same as it was Now I am planning to upgrade SSD and install the drive in the place of stock hard drive instead of in optical drive (to take advantage of higher speed). But the stock hard drive doesn't fit in to the caddy that i bought. It worked great for SSD, but not the internal hard drive.
1) Can someone recommend suitable caddy model, (hopefully cheaper one). Or if i take out the screws from hard drive, it may fit into the caddy that i have.
2) My admin user is configured in SSD, which should not have any problem after migration. But my regular user is in stock hard drive.
Info:
MacBook Pro, Mac OS X (10.6.8)
I just got a new hard drive for my Black macbook 2,1 and no i need a good external hard drive to put my old hard drive. Do you guys have any recommendations, I'd like to get something that has firewire and usb.
View 3 Replies View RelatedI didn't have a chance to take a picture, but I can take one when I get home if needed.I never noticed this before, until I recently compared it to another Macbook, but my glass trackpad has a different feel, and unlike the other unibody macbook, the trackpad is not flush with the enclosure, and there is a small space on the left side, and an even smaller space on the right side.I don't want to take it into the store, if this is something that is normal, or within spec. Aside from this issue, the trackpad works without issue and everything else is great.
View 4 Replies View RelatedOkay so I'm thinking of putting a Intel SSD in my MacBook Pro 13" as soon the next generation is launched thus removing the SuperDrive in order to fit both drives. I haven't used it a lot of times but a few times I do need it and that's why I'm now asking this question.
What external DVD enclosure will work with the MBP SuperDrive if any and how will i eject the DVDs. I'm not going to shell out a 100 bucks plus shipping to Sweden for the MCE Optibay so that's out of question, however cheaper ebay alternative that ships to Sweden with reasonable shipping is okay.
Also while I'm here. I've been thinking about upgrading to 8GB ram kit however a friend of mine told me any ddr3 sodimm ram won't work which sounds weird but to be safe I'm asking if that's true? I'm thinking of buying a Corsair 8GB(2x4GB) 1333MHz kit.
