using iMac as an external display (url... ) in target mode when it has miniDisplay ports. But the 2006 model does not have these ports, it only have a mini DVI video output port, so i assume it cannot receive video input. Is tere a way to still use this imac screen as an external screen? I am trying to connect it to my Mac Pro workstation.
Info:
Mac Pro, Mac OS X (10.7.4)
i had the macbook Core 2 Duo for About 8 months and it was working great.
yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything i shut down the laptop and restarted , there was a chime and just white screen...i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!
I have a 2.93 GHz Intel Core 2 Duo (24" early 2009) iMac running OS 10.7.3 (Lion) to which I have connected an Apple Cinema Display as an external monitor using a Mini Display-to-DVI adapter. The iMac is set to 1920 x 1200 resolution and the Cinema Display is at 1680 x 1050, and everything looks great until I turn on mirroring. When I do this, the iMac screen loses its nice crisp screen resolution, but the Cinema Display still looks fine. Strangely, the pull down menu for displays in the menu bar still claims that the iMac is at 1920 x 1200 and the Cinema Display is at 1680 x 1050, but I don't think this is the case. Is there any way to keep the iMac at the higher resolution while mirroring?
View 1 Replies View RelatedMy iMac screen has developed multicoloured horizontal lines in random spots across the screen..Is there a fix for this?
Info:
Imac intel, Mac OS X (10.4.11)
New to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
Info:
iMac (27-inch Mid 2011)
Since a couple of days, my screen (iMac 27" mid 2011) turns off. Also, half of the screen looks darker. Is it a hardware problem or maybe can be solved by software?
Info:
iMac, Mac OS X (10.7.3)
How do I get the Screen for pages, numbers and quickbooks to become bigger on my screen. The Font is fine for pringing
Info:
iMac, iOS 5.1
I had the dreaded blue screen a week ago, thanks to a bit of research here I booted from disk, then disk utility, permisions and then finally a reinstall.but now unfortunatly I seem to have a shadow or some kind of screen burn for lack of better words on the bottom left side of my 27" LED imac Â
Info:
Mac OS X (10.6.8)
I'm trying to connect a LG W1953S screen as a second screen to my iMac running Lion and it won't let me set the resolution to 1360x768. The Display only has AVG inputs and works just fine with a windows machine.
Info:
iMac, Mac OS X (10.7.3)
I want to see the screen of a Tiger machine on my Leopard machine - the Tiger machine is not on a local network but is on the internet. I have Apple remote Desktop 3.2, maybe leopards ichat will do it?
Can someone run me through it step by step??
I have a 21" Samsung Monitor that displays at 1680x1050 which is attached to my 27" 2011 iMac. The iMac only has the display option of 1600x1200 60hz. This is not the right one clearly and the reason i wonder why it is not there is that my MacBook Pro which is 2009 unibody does have this option and both are running the same 10.7.3 OS.
Info:
iMac, Mac OS X (10.7.3), 27" QuadCore 3.4GHz i7
I've got a Samsung LCD HD TV with the resolution 1366x768 My TV (nej means no, and ja means yes), and a Macbook Pro 13" (2010 version, 2,4 GHz). I connect those two with a standard VGA cable, but I can't get the right resolution (1366x768). I've tried to make my Macbook sleep, so my TV id the primary screen, but I can't get the right resolution. 800x600 is the lowest, 1900x1080 is the highest, and the closest to 1366x768 is something like 1340x760 (not exactly that number, but it's pretty close). Can I get 1366x768 resolution my TV when I connect my Macbook?
View 2 Replies View RelatedI have bought an old Macbook mainly to try some iPhone development.However I love OS X and have used the Macbook quite a lot for other things, including watching DVDs. I would therefore like to show the picture on an external screen.
I have a "Mini DVI to DVI-D" cable and bought a "DVI-D to VGA" adaptor.But this doesnt seem to work with my Samsung VGA LCD PC Screen - the picture is always blank.I just found a note on Wikipedia stating that the analog signal isn't carried by the mini DVI cable that I have.Do I need another cable?I take it the external screen can be used at the same time as the internal screen? I don't want or need an external keyboard/mouse.
Model Name:MacBook
Model Identifier:MacBook3,1
Processor Name:Intel Core 2 Duo
Processor Speed:2.2 GHz
Number Of Processors:1
Total Number Of Cores:2
L2 Cache:4 MB
Memory:4 GB
Bus Speed:800 MHz
Boot ROM Version:MB31.008E.B02
SMC Version (system):1.24f2
I have my MBP hooked up to my TV. I was trying to get Front Row to run on my external monitor without having to move the Menu Bar over, but I quickly realized that was not going to be possible. My next idea was to play the videos straight from iTunes and just make them Full Screen. Having the videos playing over there works okay (my MBP screen is still normal), but as soon as I press Full Screen my MBP goes black. Is there any way to run full screen iTunes on my TV without losing functionality from my MBP?
View 21 Replies View RelatedI'm thinking of buying a 15" NEC AccuSync Touchscreen LCD Monitor from [URL]
Who was a touch screen monitor?
I got a penryn MBP with up to date drivers and I just picked up a Samsung T220 1680x1050 that works fine in OS X but I can't seem to get this resolution to work right under XP. It does not show the whole screen and when the cursor moves to the edge of the screen it scrolls/pans from side to side like it doesn't fit.
View 1 Replies View Relatedtoday, i was testing the new mlb.tv player on my computer (played well once i ran it on firefox 3, safari still has issues here) and it had an option to go fullscreen on my screen and put it on my external monitor. the problem is that every time i expanded it to full screen on the external, if i were to click anything on the internal screen, the screen on the external reverts to a small screen. is there anything in the settings that i'm missing so that i can keep the full screen up even while i'm surfing the net on my internal?
View 2 Replies View RelatedSo I've been helping this guy do stuff with his mac (MBP 3,1, 2.4GHz dual-core, 2GB DDR2 RAM w/667 bus) and lately he's had a problem where his computer freezes totally and you have to reboot. I was working with him today and it froze while I had address book (which had stopped responding) and finder open. He always has a second screen (one of the big apple monitors that uses the video port, a USB, and a firewire 400) and an external Firewire 800 harddrive, with external power-source, for backup always plugged in.
The machine is only like 2 years old and he has over 70 GB left on his harddrive. Is it possible that always having the external monitor and external disk is draining resources and making the computer run slower? If this is the case, will this model MBP hold more than 2GB, and if it does, does it come with two 1GB modules, or one 2GB module? The next time I see him I'm gonna install MenuMeters to see if his resources are being used a lot with the stuff plugged in.
On my 2008 24inch iMac the screen has a problem ( dead pixels ) and I will get it replaced in the future , in the mean time I have a very nice large external monitor connected to the iMac which I use ok, what I am looking for is a way at first when booting up , to be able to see both the iMac's screen and the external monitors screen , then some how shut off / make blank the iMacs screen only leaving the external monitor on ?
View 4 Replies View RelatedHi I'm connecting an external monitor to my macbook pro and am experiencing regular vertical lines throughout the external screen. I've tried DVI-D and VGA. I've tried changing resolutions. I have taken a screen shot of the monitor but this screen shot shows a clear image. Attached is a picture of what it looks like. Hard to spot as taken with my isight. (Ignore the cable hanging down).
View 17 Replies View RelatedMy Dell u2711 is my primary display. Sometimes I wake up the macbook out of sleep mode and forget to have the lid shut. Consequently the Macbook screen comes on as well. Everything is working as it should but I am curious is there a quick way to switch the Macbook display on and off with the setup I have described?
View 11 Replies View RelatedI have screens from 2 dead ibooks is it possible to turn then into external monitors?
View 1 Replies View RelatedI work on the macbook between 90min-2 hours throughout the day. At home, I hook up to a twenty-four inch monitor that I had calibrated through a Windows based system and complete my work. Now the files that I am working on are being processed through the macbook but viewed on the external monitor. I don't really care about the calibration of the macbook because the work that I am doing on it without the external monitor is really not color related i.e. removing scabs off of children, removing hair off of the face ect, but I need the final image to be accurate before it is sent off to the lab.
So, what do I need to do? Calibrate the macbook and the monitor or just the monitor and if just the monitor can anyone walk me through this? I know I could "search" but switching over from windows has been an experience and honestly, I am tired of "searching". Speaking of searching, I am still trying to figure out a way to sync my Dell x50v to the macbook, anyone? I know the x50v is old but it is the most solid piece of windows hardware I have ever owned and it still "just works".
I have a white MB (early 2008). I'm going to be getting an external monitor soon with a native resolution of 1920x1200 - the highest that the MB's Intel GMA X3100 will support. I know that I can open System Preferences > Display and then click the little menubar and drag it to the other monitor to make it the primary. Here is the thing: I want to just use my 24" monitor and not use the MB's screen with it (I have an external keyboard and mouse).
Should I...
1. Use the two displays as an extended desktop and then (leave the MacBook lid open) just turn the brightness on the MB all the way off so the screen is black (no back light)?
or...
2. Just close the MacBook and use it in clam shell mode? I watch Hulu and YouTube a lot which causes the CPU load to increase and fans to spin up.... do I have to worry about over heating? I would be using the 24" monitor exclusively all the time and then take the MB when I go to class. Will this just ruin my MB pre-maturely?
I have the new macbook unibody, and use it from time to time to dsiplay things to an external montior, plasma, projector, etc. Using a mini-display adapter to a converter to get s-video was a challenge, but I figured it out. I have used this many times, as I am a DJ and need s-video out to connect to most devices.I was at an event saturday night, and the display on the external device (projector) kept displaying my desktop, NOT the external feed.
It was NOT set up for mirroring, as it seems like the displays were 'switched'. I had my desktop on the projector, and my external on my macbook pro monitor. I tried to fool around with arrangement and resolution, but to no avail. I understand that sometimes you have to drag your source to the right (of left) to get it to display on the external, and this was done, but it was still reversed.I know it was something simple to get the 2 switched back to the way it should be, but I could not figure it out. Any advice? None of my apple buds can figure this out.
How can I watch a movie on my external monitor in full screen and still work on my Macbook Pro? Every time I go back to work on my Macbook I lose the full screen viewing on my external monitor.
View 3 Replies View RelatedMy 2006 mMcBook is dead and parted out. I still have the case and screen, but no HD, RAM, battery, or working logic board. How can I take the screen and make myself an external monitor out of it? I am presuming it's possible. I can solder a little and I love messing with parts from radio shack. So, has anyone heard of this? I tried googling it but couldn't find any search terms that brought me what I wanted.
Basically, I want to convert the video cable to DVI or even better, Display Port, and then figure out how to solder in a power source to just plug into a wall (since I'm assuming it'd be too big of a job to have it powered off of the FW800 or USB from the macbook pro). Is this possible? Since the computer is dead and gone, it won't hurt to experiment. Anyone have any links or guides to this?
I just recently (a month ago) bought my first MBP 13" unibody. When I connect it to my TV (Panasonic VIERA G10 Series TC-P46G10 46-Inch 1080p Plasma HDTV), the image is bigger than the screen, tried to switch resolutions with no success. The connection is minidisplay port to HDMI.
View 5 Replies View RelatedAppleScript perhaps - to allow either auto-switching of the main display, or enabling 'Mirror Displays', when Front Row starts?
Normally I have my MBP setup in extended desktop for when I connect my external monitor or connect to my TV (DVI->HDMI adaptor) for watching BBC iPlayer etc., however I want FR to run on the external monitor/TV if one is detected.
I posted yesterday about my 1.83 17 inch first generation intel iMacs screen dying. If we get an external display, is there a way to make that the main screen?
View 5 Replies View Related