I'm running Lion 10.7.3.
shift + control + cmd + 3 used to work, as did + 4 to capture sections, but as of today these featuers no longer work. I hear the camera noise as if its working, yet nothing shows up on the desktop. I've tried restarting and I've tried changing the location of where the shots go. No dice.
Info:
MacBook Pro, Mac OS X (10.7.3)
For some reason my screenshots are no longer showing up on my desktop, or anywhere on my computer that I can find. When I press Command + Shift + 3 or 4 I can hear the snap sound but it doesn't appear on my desktop. I've tried Spotlight search for "Picture" but found nothing. It was working fine a few days ago, I don't know what happened.
View 5 Replies View RelatedTwo days ago i installed Mavericks on my MacBook Pro and since i did it, my mac runs very slowly. The pointer goes slowly and it takes a lot of time to load the programs (safari, word, etc.). It takes also longer time to start up my mac. I've checked on the activity monitor and the system activity amount is so high, around 80%. But what i've discovered is that when i plug in the charger, my mac suddenly runs faster and i've checked again the system activity is only around 1-2%. How can i make my mac runs faster even when i don't plug in the charger?
MacBook Specification:
MacBook Pro 13-inch, Late 2011
Processor 2.4 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software OS X 10.9.2
It takes really longer time to boot up. Eventually it gets boot, but i am unable to access Mail app. Sometimes the booting is faster. In this case, i can use the Mail app. I tried to shut down, restart many times, but the boot up takes longer time or even lesser.
Info:
MacBook Air, OS X Mavericks (10.9.4)
My new macbook pro of late 2011 was working perfectly! But i know i shouldnt complain but iv only had it for 5months! Nyways, all of a sudden instead of an instant shut down which it was doing it now takes 5-10 seconds to shut down! And my preference is to shut it down! I dnt like just letting it sleep constantly!?!
Info:MacBookPro, Mac OS X (10.7.3)
why my MS Office takes longer time to start up after I have upgreaded my MacBook Air to OS Lion ? Why my MacBook Air takes much longer time to shut down after upgraded to OS Lion ?
Info:
MacBook Air, Mac OS X (10.7.4)
My MBP late 2013 version takes longer to boot Yosemite and safari keeps crashing frequently. The system also takes longer time to switch applications. Ive never had this problem with my system while running on Mavericks.
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
My screen shots are no longer appearing on my desktop as preferred but instead are going to ' all files' in Finder.
I must have changed a setting but can't figure out what I did to cause it.
Info:
iMac, iOS 6.1.4
My 2011 iMac 21.5 inch is taking too long to startup.Once I pressed power button it make start up chime sound and start normally exactly after 20 min.After booting up every thing was fine.And I am getting crancking hiss sound continuosly from backside of my iMac.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
My iMac starting very slowly takes about 10 min.
Info:
iMac, Mac OS X (10.6.6)
My imac has slowed down overnight - it takes ne 2 mins just to open safari.Ive run a virus check and all that.
View 9 Replies View RelatedAs above. Takes forever to boot, Painfully slow, low HD message despite showing over 600 GB available. .
Info:iMac (27-inch Mid 2010)
I turned of my mac the other day, it took 5 minutes to turn on. Bluetooth wouldn't work and the keyboard and mouse can't connect without it how can I turn it on? I have a small USB mouse to scroll around but how can I turn it on without a keybord. I looked on the bluetooth menu it just said bluetooth no available.
View 4 Replies View RelatedHours before the iMac was fine but the next time took too long to startup and when it worked there was not Bluetooth available. I did already repair permissions and disk, everything seems to be fine, the status of the volumen is "verified", but still taking too long to start up and no news from bluetooth. In /Library/Preference Panes/ there is a Bluetooth pane.
Info:
iMac, Mac OS X (10.6.4)
my imac is running slow & takes a long time logging on, anyone knows why this happens?
Info:
iMac, Mac OS X (10.7.3)
Since I've update to Mac OS X Lion 10.7.4 my imac takes 20-30 mins to boot.
Info:
iMac, Mac OS X (10.7.4)
OS X 10.9.4 - iMac 2.7 i5, 8GB was rapid when i first had it, e.g. Top Sites in Safari but now Top Sites takes it time loading.
Info:
iMac (21.5-inch, Late 2012)
Just happening within the last couple weeks... 2.9GHz i5 iMac running 10.9.3..Energy Saver settings set to default from day 1..Display is set to turn off after 10 minutes, put hard disks to sleep when possible, and wake for network access.The screen used to pop right back on after hitting the keyboard or moving the bluetooth mouse... Now it still sometimes comes right back and other times take up to 15 seconds. Just happening the last 2-3 weeks.
Info:
iMac, OS X Mavericks (10.9.3)
I have a very long delay in opening pages on my desktop. I have all the internet wireless bars lit up. I don't know if it is a connection issue or wireless issue.
Info:
iMac, iOS 5.1.1
On my 27 inch, late 2012 iMac i have one terabyte on my hard drive. I am running out of space because the Other is so big? What does 'Other' contain and how do I reduce the amount of space it takes up
View 4 Replies View Relatedmy work computer (Windows), but my 2012 iMac that I've had for 2 years has worked flawlessly up until recently. A few days ago it started taking forever to display files in finder. I had to keep relaunching, and it would freeze. I tried the workaround that was posted here but that didn't work either. It went away for a few days, but last night it really came back with a vengeance. The relaunch finder trick only showed the current folder, while navigating to other folders would simply show the loading icon forever.
Also, my iMac was shutdown for over an entire day yesterday, and when I turned it on the " Your computer restarted because of a problem". came up. I've never experienced this problem before, but after 3-4 tries it finally logged in to the Home screen. This is when I noticed the above (finder problems) returning from a few days ago after being absent. The finder issues continued, so I restarted the mac, and it just kept cycling over and over (reboot, try to load, auto-reboot, etc.).
Is this an issue with the HDD? I did a disk utility check the other day and it said everything was in great shape.
I have an iMac model identifier 9.1, with Mac OS X v10.5.8 and safari version 5.0.6. All programs are running normally (fast) except safari. When I try to load webpages it takes about 11 seconds to fully load. All other computers in my house are connected to the same internet and running fine. What do I do to make the loading faster?
Info:
iMac (24-inch Early 2009), Mac OS X (10.5.8)
spinning ball with movement and clicking cursor. spins forever. temporary fix running disc utilities, clean my mac and roboot. Same error found in safari preferences but recurs frequently and requires repeating fix for brief correction.
Info:
iMac, OS X Mavericks (10.9.4), 2.66 Ghz processor
I'm around 2-3 days away from my MacBook Pro arriving, and I was just wondering what is the best way to take screenshots on a Mac? I need something that can be made to take a screenshot of a particular window (automatically scale to the size of the window).
View 4 Replies View RelatedI've noticed that using Apple's Grab, or any other screen capture application I've tried, I always end up with slightly blurred text.
It doesn't matter if the capture is saved as TIFF or PNG or other lossless format, or as 100% JPG. Here's an example from Grab. The text doesn't look the same as it does on the screen originally - I've put an example there using Photoshop to show how the text actually looks to me on screen. You can see that the text in the screenshot is blurred.
Is there any way to get around this? Any screen capture software that can get me sharp text?
I'm currently running Mac OS X 10.6.2 on my mid-2007 white macbook. I recently reinstalled Snow Leopard, so I'm not positive if screen shots have been working before on this current installation. My problem is that whenever I attempt to take a screen shot, using cmd-shift-cntrl-[3 or 4], the snapshot noise is made, but no image file appears anywhere on my desktop. I have tried searching the computer for files containing "screen shot" in the name, and none come up, so apparently the file is not being saved anywhere on the computer. Neither restarting Finder, nor restarting the computer solved the problem, so I'm stuck.
View 4 Replies View RelatedEvery time I take a screenshot (regardless of method: via preview, screenshot, selection or screen mode shortcuts), it always comes out all black! Luckily I have Snapz Pro X for video capture so I can show you what I mean, but it's much more of a pain to use on a regular basis. This has been going on for about a week and a half now.
OS Version: 10.6.4
15-in 2.8 GHz/4GB MacBook Pro
I have a MBP with Snow Leopard and I cant figure out how to take screenshots in a game (Starcraft 2). I've tried both command+shift+3 and 4 but they don't seem to work, normally it saves a picture on my desktop but when I do this in a game nothing happens.
View 1 Replies View RelatedI've been trying to figure this one out for quite some time now. I'm using the command+control+shift+4 option to take a quick screen shot like I always have, but they haven't been posting to my desktop. I've searched all of my files for .png as the should be saving, but they aren't showing up. A tool I used that was recommended to me was to download OnyX and I could control where the files were not only being sent to, but also what type of file they were (.png, .jpeg, etc...)Regardless of where I would choose for them to go they are still showing up.
Info:
MacBook, Mac OS X (10.7.3)
Why can I no longer use Java?
Info:
iMac, Mac OS X (10.5.8)
