On my iMac I need to have a Windows partition because NVivo is not running on Mac. 5 G is to small so I need to enhance the partition. How?
Info:
iMac, Mac OS X (10.7.3)
So I am trying to open up my bootcamp partition (running windows 7) in VMWare and I get this error message: Cannot open the disk '/Users/brandonquirarte/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. It was working just fine before the upgrade to Snow Leopard but I am not sure if that has anything to do with it. I had to reinstall Windows 7 after I tried installing the Bootcamp 3.0 drivers so that may be more of the issue. I didn't test to see if would work still when I upgraded to Snow Leopard.
View 3 Replies View RelatedI have installed Windows 7 using bootcamp with no problems. I now want to use parallel so I can do some things in windows without restarting. I don't want to get rid of the bootcamp install though since I do gaming through it. Now that I've installed Parallel it's asking if I want to use the bootcamp partition in the virtual machine? Do I? I don't really understand.
View 1 Replies View RelatedIs it possible to download Nvivo on my MacBook Pro?
View 2 Replies View Relatedhow can I install a windows based application on my mac and run the program without installing windows? I have tried a program called crossover which is supose to be an emulator but it doesn't seem to work.
Info:
iMac, Mac OS X (10.7.4)
How do I get my IMAC to talk to my laptop running Windows XP SP2
Info:
iMac, Mac OS X (10.7.3)
Speakers work but cannot get any sound output. Running windows 7 on Intel iMac. Speakers sound on booting and graphics in Control panel and on toolbar indicate sound is being recieved but nothing comes out of speakers or headphones.
Info:
iMac, Mac OS X (10.6.2)
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
So my iMac came with a 1TB hard drive and I installed Windows 7 x64 but only gave it some 93GB. I have a two-prong question:
Can I add a third partition to my drive after I partition for BootCamp? My main partition ("Macintosh HD" by default) is over 900GB large and I'd really like to cut that up into 2x450GB, for example, in addition to the 93GB BootCamp partition.
Second, once partitioned, is it possible to resize the BootCamp partition to make it bigger after it has been set up?
Got my first MacBook Pro about 2 months ago and I have been enjoying it to full effect, installing programs such as logic studio and photoshop cs5 on it. Recently, however, I decided that I would like to access some of my windows based programs when I am on the road and don't have my desktop pc with me. So I bought a fresh copy of 32-bit Windows 7 Ultimate and sat at my macbook, put the disc in and then loaded up Boot Camp. I went through the menu options, decided that I wanted a 50GB partition, leaving my Mac OS drive at 182 GB with 83GB to spare. However, when I started partitioning, after about a minute it stopped and this error message appeared: "The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.".
I tried cleaning all my temporary files and deleting some files in my downloads that were quite large and I restarted my machine. The problem persisted. Is there a solution to this problem that does not involve doing all this rubbish with a fresh install of Mac OS? I don't have any method of backup apart from a couple of 4GB flash drives..
I recently installed MacDrive on my Windows Vista X64 partition so that I could access my iTunes Library on my Mac partition. After installing iTunes on my Windows partition and pressing shift while it opened, iTunes asked me for an iTunes library file ending with the extension ".itl". Now, I do not have any files ending with this extension in my iTunes folder on my Mac partition. Is there anything I can do to make iTunes on Windows to read my music library on my Mac partition?
View 5 Replies View RelatedI am dual booting XP Pro and OS X on my NC10. I have XP Pro installed on the main partition with a FAT32 partition for files that can be read by both OSes (see attached image for two views of the partitions). I then installed OS X on an extended partition. Unfortunately, I had another 5GB partition also on that extended partition. I now want to delete the spare 5GB partition and non-destructively reallocate the space for the OS X partition - I want to expand it to be one big partition with my bootable OS X install still on it. Unfortunately, I can't find any way to do this in Partition Magic. Is it possible with GParted/BootItNG/iPartition or any similar software? If so, which and how? The NC10 has no CD drive so solutions that work from OS X or XP or a bootable USB stick would be preferred.
View 3 Replies View RelatedI have a 13" MBP with a 250 gb hd, I partitioned the HD 25gb for Windows XP shortly after I bought it. I was unable to install my copy of windows, contacted apple after exhaustive search as to why... Long story short, I now have Vista to install... When I went back to Boot Camp Assistant; partition was gone. Researched... ran disk utility, repaired and erased partition. Bootcamp HD now shows up in desktop, still not in bootcamp assistant. Since I am unable to locate in assistant; would there be any problems with just installing Vista off the install disk by restarting? Any ideas what to do if this is not a good idea (short of restoring)?
View 4 Replies View RelatedIs it possible to sync one's OS X iTunes library across Boot Camp into Windows? I would like to have the same library on both my Windows and OS X partition, and by library I mean having the same ratings and play counts across both partitions in addition to the actual music. If this is possible, how can it be done?
View 3 Replies View Relatedi have a macbook pro on which i've installed windows xp, i made the mac and windows partition equal which was a mistake thinking will use them as much as one another, but it turned out to be that I'm barely or never using my windows on my mac, and I'm running out of space very quickly. I need to know how to make the windows partition smaller and the mac partition larger. I need an answer quickly because i've only got 4 Gb's left on my mac partition and 40 Gb's left on the windows one.
View 3 Replies View RelatedI'm using 10.6.5 and recently I found a hard drive that has an exFAT partition on it. I suspect that partition contains the TrueCrypt container that I've been looking for, but I can't seem to be able to mount it on OSX to get to the files within that partition. Is there any way I can mount this exFAT partition? I'm running the hard drive on an external dock.
View 5 Replies View RelatedI've had an iMac for just about a year and over time I guess I just didn't notice but the machine always ran very quietly. At the same time the back of the computer would heat up so bad that it would nearly burn my hand if I left it there. Well last week I decided to upgrade to Lion from Snow Leopard and when I did the install failed and froze up the hard drive. I took the computer in to the apple store and they determined that it had to have a new hard drive installed because the old one (only a year old) had a physical malfunction (was broke). So anyway I have my iMac back and get it started up, backed up from time machine, and then finally get Lion istalled - and now all of the sudden I notice that the fans in the computer are CONSTANTLY blowing - I can hear them spinning and can hear the air venting out of the back of the computer - and the computer is STILL really hot on the backside of the screen.
So now I am wondering if the originial problem was the computer heating up and if that may have broken the otherwise good hard drive? Also now that I have a new hard drive - should I be concerned about the fans being on ALL the time? I mean they never go off. Even when I leave the computer for hours and come back to it and the screen is asleep the fans are STILL buzzing away at top speed. Here is the stats on the computer at the time that I'm typing this note - there are no other programs running than Firefox and Mail. Also - I don't know what the optical drive is exaclty - but if it's the DVD drive (superdrive) - there is nothing in the DVD disc drive
Info:
iMac, Mac OS X (10.7.3)
my 4 year old IMac 2.4ghz intel core 2 duo with 2gb running 10.7.3 has been running really slow since I installed photoshop CS4 and upgraded to lion ( I have 137gb of free space on hard drive) I mean it wont quit out of photoshop I always have to do a force quit and most applications run really slow. Do I need a new computer , what should I go for to have a smooth running mac?Was thinking of a new IMac 27-inch: 2.7GHz with 4gb memory.
Info:
iMac (20-inch Mid 2007), Mac OS X (10.7.3)
just trying to get back into Windows 7 after installing it via Boot Camp. Only thing is that holding down the option key during restart does nothing, and although the partition in which Windows 7 is installed under shows up in finder, I am unable to view it in system preferences so that I can boot from it. Any advice?
View 3 Replies View RelatedI just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies View RelatedDoes anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
Basically, I created a BC partition for my W7, however, I only gave it 32gigs of space (I only wanted to use it for gaming).However, now I want to install Autodesk 3D Studio Max 2010 on W7, however I don't have enough space on my BC partition to do that...I've researched enough to know that I will need to use one of the following programs:I've read up on all the programs and done some research on them.
Ive noticed most people are having problems with all of these programs when trying to backup a W7 image whilst on Snow Leapord (Mac OS x 10.6, which I am running)I know that is the function of the 3 applications above... But to my knowledge... In theory - I should be able to just backup my W7 using a reliable backup program (Can someone recommend any?) and then delete the existing BootCamp partition, create a new one of 100gig and then just load up the backed up image for Windows 7...
I've been able to find ways to reallocate space on my hard drive but what if i want to take windows completely off and restore my hard drive to purely OS X? Is there a way to do that also?
View 6 Replies View RelatedSo I had a 32gb Windows XP partition that I want to upgrade to Windows 7.
I removed the partition via Boot Camp assistant, and when I tried to make a new partition, it's telling me that I have to "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try again."
What does that mean? Do I have to reformat (and subsequently erase) everything on my harddrive? If I have Time Machine set up, will I be able to bring everything back to how it was originally?
I went to install XP on boot camp and I accidentily installed it on the wrong partition, so the drive that had leopard on it is now formatted to NTFS and I cannot format it back. I beleive all my data is still on because there is a lot of used disc space. I want to convert it back to HFS without the loss of data, as I have important information on the hard drive that I do not want to lose. I know this is my own fault because I wasn't paying close enough attention to where I was installing Windows
View 3 Replies View Relatedyou cant use a windows xp sp1 disk to install windows xp onto your mac using bootcamp.What i wanted to know is if i partition my HD then format it to a recognizable format for windows installation disks, would i be able to install windows xp sp1 that way?or would the same principle apply as bootcamp and sp1 versions of xp are incapable of being installed on macs?
View 6 Replies View RelatedI used Boot Camp to put XP on my iMac. If I get Parallels, will it be able to give me access to the files that are on the currently existing XP partition?
Or will I have to re-install XP onto the Mac partition and transfer all my files from the old Boot Camp XP to the new Parallels XP?
