Ok the computer stopped working while surfing the net. Now it powers up gives a chime followed by the globe and then the apple. That's it then I get the working spinning wheel and that's it.
View 3 RepliesI installed 10.5.7 yesterday. Immediately after the installation was complete, my Apple bluetooth keyboard stopped working. Went into Bluetooth system settings, and it said that there was no bluetooth hardware found... (it's built into the machine!!)...
Also, every time I start iTunes, it gives some weird error about Adobe Flash player. I'm not at home now so I don't have the exact wording of the error with me, sorry...
i have already tried going to system preferences, and the internal speakers are located, connected, and should work. the display that shows up when the volume switches looks the same as when they DID work, but no tone sounds when i switch the volume.
Info:
iMac
my sound has stopped working on my mac suddenly and i dnt know why
Info:
iMac, iOS 5.0.1
My keyboard has suddenly stopped working. at first the letter e was stcuk, now the i is gone... what can I do?
Info:
iMac, Mac OS X (10.6.8)
I noticed yesterday that when I opened mail, it kept trying to get mail off the sever even though everything downloaded. Today when I open I just get the colored wheel and I must force quit everytime.
Info:
iMac, Mac OS X (10.7.3)
My keyboard stopped working in Finder last week. I see a number of other discussions were going about this but either thier problem was not the same as mine or the solutions given were not available to me, such as rebooting from a disc.
Info:
iMac, Mac OS X (10.5.8)
Internet had been working fine until 4 weeks ago, when it cut out and has not worked since. After an excessive amount of time spent on the phone to Optus (so-called) techs, receiving a new cable modem, the internet still does not work. It is receiving all relevant info but when you open Safari it says there is no internet connection.
Info:
iMac, Mac OS X (10.5.6), Internet lost Optus can't help
My speakers suddenly stopped working. I've unplugged, rebooted ect & nothing works. I get lots of feedback but no sound & my Imac will not show them as an option in systen preferences.
Info:
iMac, iOS 5.1.1, I think thats my operating system?
The camera had been working fine with FaceTime, Photo Booth and Skype under 10.9.4 and then something happened. I run FaceTime and the camera screen comes up, but it's black with no sidebar. I had this happen once before when the serial number hadn't been put back after they replaced the motherboard. It's back in now and was working fine. I did have to install Google hangouts plug in, but FaceTime was working fine after that and I've since uninstalled it after FaceTime stopped working and it still doesn't work.
I did have AirParrot and SoundFlower installed which the camera worked with, but uninstalled them as I saw something about a possible problem. I've reset SMU and PRAM, nothing. he mac sees the camera as being there so it shouldn't be a camera problem, but the apps while seeing the camera aren't getting any input [and no it's not blocked. ]
Info:
iMac (24-inch Mid 2007), OS X Mavericks (10.9.4), 2.4GHz Core Duo/4Gb Ram/320 HD
Recently the ALT +2 and ALT +3 functions (to insert the euro and hashtag symbols, respectively) have stopped working on my keyboard. I have looked into various preferences and settings but have been unable to sort this out.I'm on an iMac running Lion 10.7.3 and a wired Euro keyboard with keypad.
Info:
iMac, Mac OS X (10.7.3), Time Capsule
It just stopped receiving, and now wont send either. It will not recognize the password when I put it in.
My ISP says its an issue with my mac mail program
Info:
imac, Mac OS X (10.5.7)
My iMac's built-in bluetooth suddenly stopped working. Can I troubleshoot or replace it? It is an early 2008 Intel iMac. Suddenly the Bluetooth logo changed to the one with the jagged line through it. Bluetooth no longer shows in System Prefs. In the hardware list under Bluetooth it now says, No information found.
Info:
iMac, Mac OS X (10.7.3)
My Wireless mac keypad has stopped properly working. The keys sometime do not correspond to the result, or a a simultaneous duel actio, for example when the delete button is pressed the. Ursor does go backwards, but it also turns the sound up. The keyboard is properly connected to the computer, and the battery life is up in the nineties.
View 2 Replies View Related2009 iMac running Snow Leopard.
NO issues until this morning. Put computer to sleep and it would not boot back up properly (stuck on Apple boot screen and it FINALLY came on after many tries). Now my wifi or ethernet won't actually "connect" to the internet. It says connected under network preferences and it's green, but I have no internet connection...
Info:
iMac, Mac OS X (10.6.8)
All of a sudden the copy and paste function just stopped working. I'm running a 2007 imac intel with Snow Leopard on it. Tried rebooting several times. I'm not even sure it's the paste, it will not copy. Not with key command, not with right click, not with drop menu. Tried different keyboard.
Info:
imac, Mac OS X (10.4.7)
I tried an SMC reset and all. It was working, system locked had to reboot, and then a looking for bluetooth keyboard dialouge came up on restart. I got out of that, worked with mouse for a while, then realized my usb keyboard was not working. I reset SMC, tried different USB ports, Everything.
Info:
Mac Pro, Mac OS X (10.6.8)
My bluetooth wirless keyboard suddenly stopped working. It started with the low battery alert, so I changed the batteries, however after replacing the batteries, it stopped working even though it says connected.
Info:
iMac, iOS 5.1.1
While working at a new projekt iMovie stopped working and shows the colored disc for processing. When I try to restart the Mac I get the information that a program named backup-helper prevents the restart. I can't find a program with this name.
Info:
iMovie (iOS), Mac OS X (10.7.3)
I've iMac OS X Lion 10.7.3 latest version desktop. For couple of months, I'm dealing with dropping wifi connection during working. Every a few minutes, even during surfing though internet pages, wifi connection drops. When you look at the signal level etc.. everything is seems to be fine, but it is not possible to connect internet after close-open wifi. For a while, connection drop happens again.
Info:
iMac, Mac OS X (10.7.3)
When I am on the internet, I am constantly losing connection.
Info:
iMac
my mouse has stopped working. How do I turn on mouse keys through my keyboard?
Info:
iPad, iOS 5.0.1
Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
during SW to my mini-mac wireless key board the keyboard stop responding. now i have left without an ability to work with my wireless keyboard. is there any why to reset the keyboard to default setting so it will come to live again..
My MacBook's USB that near the shift key suddenly stopped working. Other works fine. cause I need to have both ports work. HOW do I solve this?
View 14 Replies View RelatedI have been connecting wirelessly to the same router for about 4 months now, using DHCP, and having the settings on the automatic connection. I left the computer on, but closed, so sleeping, for about two days. When i opened it, the battery did not yet run out but the internet has not connected since.
I have full connection in internet connect to my network. Status says connected. If I have the IPv4 using DHCP, the status says that i am connected but my computer have a self-assigned IP adress. When I put in the IP manually, the Network setting give me a green light on airport and says that I am connected to the network thru airport. Needless to say, no browsers (Firefox, Safari, Netscape, or Internet Explorer) have been able to connect to the internet.
I have tried running Disk Utility for any errors, but there have been no changes.
Powerbook G4
1.67 GHz PowerPC
512 DDR SDRAM
v. 10.4.11
I was installing X-Plane 9 on my fairly new Mac Pro when it stopped working. I switched disks and nothing happened, the drive just won't spin up. I have tried a number of different CDs and DVDs and none will spin up. I can verify that by looking at the position of the disk when I put it in and take it out, it never moves.I have tried the usual reboot and resetting the PRAM. (I did the command option o r and un-plugged with power button for 5 seconds)I tried calling Apple care 2 times and the message I get is, the call center is closed. That's it, they don't even tell what hours they *ARE* open.
View 7 Replies View RelatedRecently my 2 month old (+/-) rev B MBA USB stopped working. When I plug in a thumb drive, DVD drive or anything, the power light on the usb peripheral comes on, but the drive does not mount. I am running SL, and until last week I had no issue.
View 1 Replies View Related a few days ago, (after reseting my computer with time machine) my Quick Look stoped working. all that hapens when i hit the space bar (or any other way of opinging quicklook) is the big grey box with nothing in it. I can still see the prevews of the items with coverflow.
When i checked console i got this message every time i trie to open a file " Finder[103]: [QL] Display bundle <QLGenericDisplayBundle: 0x11638e120> did not return a layer although it was required to because it did not return a view either."
My MBP's (October 2007) screen just stopped working. I don't know what's up. It's not the backlight, because I've turned my backlight off before and you can still see the screen faintly, but I can't see anything. I ran to Target to buy an external monitor - but they were out, so I bought a TV (Sylvania lc195slx) in hopes of that working. Well, it didn't work. I am currently using a newer MBP (September 2009) borrowed for a few minutes from a friend to write this and test the TV.
Her MBP was able to hook up to the TV just fine. So now I'm wondering if there is a video driver error or something. This is really bad timing, as I have to do a presentation on Tuesday for a final and I'm still working on finding the information. Anyway, if you can offer any advice to get the screen and/or tv working, that would be great! And I'm using my DVI to VGA adapter to plug my computer into the tv.
