Hard drive recently failed. Replaced hard drive and used Time Machine to recreate system. Everything seems ok, but I cannot install software. It prompts for a password, as it always has, but the system is rejecting my password as invalid. This is the same password I have had for years (yes..i know). I cannot figure out how to reset it since it doesn't recognize the original password.
View 8 RepliesI just did a clean install of Snow Leopard on my MacBook Pro and I'm at the part where it asks if I already own a Mac. I choose restore "From a Time Machine backup", I select the backup volume but then the system is asking me for the passoword to my Time Capsule. What? I don't remember giving it a password. I tried my system password from my Leopard installation along with a bunch of common passwords I've used and none of them work.
View 2 Replies View RelatedI would like to restore my OS to 10.7.2 after the upgrade to 10.7.3. I have time machine, and backups before and after the fatal update.But I worked between and created files so I do not want to completely restore my system but only the OS / system part.
Info:iMac, Mac OS X (10.7.3)
Something went wrong on my mac last week. I noticed that backup couldn't complete so I restarted. Then I could no longer login to my main account (admin), but could login to my daughter and wife's managed account and could create a new admin account. I assumed this was a key chain issue so gave up trying to access and decided to restore from time machine. 2 restores (72 hrs each) and the mac will not boot after the restore. I have the ever spinning pin wheel for 24 hrs already. What can I do to get all my docs back? I don't think it's a hard drive issue (1.5TB) installed almost 6 mths ago.
Info:
iMac, Mac OS X (10.7.3), 1'st Lost access to admin account
I have wiped my calendar data and cannot find how to restore it from Time Machine. Have looked at several posts but my problem is that I cannot find my Library/Calendar location or any iCal files. What should I look for and could the files be hidden?
Info:iMac, Mac OS X (10.7.3)
is it possible to undo a Time Machine restore on a new setup and start again? I had an iMac that I backed up to Time Machine and then bought a new iMac (May 2012). When setting up the new iMac I chose to install a copy of my old iMac from Time Machine. The new iMac is now a perfect copy of the old one..... only I really just wanted a totally fresh start. Can I undo this process so that I can set up the new iMac as if it is just a new computer and can this be done without damaging the backup of the old iMac that I have on my Time Capsule? Lastly, can I subsequently just take the photos that are part of the old iMac backup on the Time Capsule and save those to my new iMac.Â
Info:
iMac (21.5-inch Mid 2011)
I tried following the Pondini instructions for restoring individual files but I must be doing something wrong. To restore the address book, he says "open finder window". No problem. Then "enter time machine then navigate to the backup in question". When I open time machine, it only wants to back up. I can't access any files from there. I can only access the files from the backup folder but then there is no "restore" button. How do I restore the address book that I backed up in time machine?
View 4 Replies View RelatedI have somehow lost all my iTunes. When I go to play something - I get the grey exclamation mark comes up. In trying to restore from Timw Machine, I find my iTunes is now unlocked. I have gone through the process of unlocking every file I can find and changing all the permissions to read and write. However it is still locked.Â
a) how to unlock iTunes using a defferent technique to that which I have tried.Â
b) tell me EXACTLY (step by step - because I am a mac newbie!) how I restore from my Time machine preferably. I do have my full collection (about 15 000 pieces) on my ipod if I need that - but I am terrified of loosing everything?
Info:
iMac
I've had a new hard drive installed on my iMac, (and the place that did it for me also installed 10.6 OS). Now, when I plugged in an external hard drive I had been using with time machine (and OS 10.5), and clicked 'restore' in the time machine interface, it transferred 200+gigs of data onto the new hard drive. However, I can't see any files anywhere - only see that that much space is now taken on the new hard drive. I've since read elsewhere that I should have used 'migration assistant' to do the job, but before I do this, I what to get rid of the 200+gig of data taking up room. How do I do this without a fresh install of the OS? (I don't have disks for 10.6). Or will the time machine restore (with migration assistant) not work between 10.5 & 10.6?
Info:
iMac, Mac OS X (10.6.8)
Recently my hard drive crashed. All attempts to revive it failed. I have used Time Machine for years to save my backups on an external hard drive. Can I get Gmail emails I saved to my iMac saved to a flash drive for archiving on my Gmail account? If so, how would I go about extracting and saving the email messages from my Time Machine backups? I have a PC laptop and access to another iMac. I would also like to copy several audio books I had in iTunes. How could I access them?
View 1 Replies View RelatedRecently i bought and instal external hard drive for the pictures, movies and music, configured time capsule to back up this data, and I did it to speed up my Imac (the hdd was full, so I erase all content from it). Throug the time machine I can reache movies but I cant viwe particular picture in iphoto library and restore it. Imac have os x snow leopard and iphoto 11?
Info:iPhone 4, iOS 4.3.3
I located the time stamped backup, selected my hard drive, then did "RESTORE".The first thing that happened was a message that it was preparing to copy to 'volumes'It got to about 3823 items when I got the error code 8003. I wanted to restore my entire iMAC to that stamped date-time.
Info:iMac, Mac OS X (10.7.4), restore from time machine
How can I restore an individual photo or event from my Time Machine backup? When looking at my backup, I can see the picture file. When I try to open it, it calculates the size of the library. It does not open. Nothing happens when I select 'open in iphoto.'
Info:iMac (20-inch Early 2008), Mac OS X (10.7.4)
I got SMART warning about my hard disk, I got it replaced by a shop, but said I would do OS restore myself. (cant afford cost )Thought it would be simple - but it is anything but.  It appears my install DVD is damaged, so was not able to boot with Grey OS install disk - holding the C key.I managed to get iMac to boot up using the old disk - using firewire dock. However I was not able to restore old disk and OS to new disk, Due to IO read error.(this is why I had the SMART warning). So I am unable to get the OS on the new HD using the old disk or the DVD as these are both damaged.  The computer is running, so I thought I would try buying and downloading LION - then using the migration tool . The download is still running after 2 days.I went to apple store, and was told that they cannot replace DVD , so I should bring in the iMac = and pay for the restore. Dont wish to do this. As I have the computer and OS running, is there anything I can do to get a time machine restore from another backup disk (USB).
Info:
iMac, Mac OS X (10.5.6)
I have an early 2006 iMac with 10.5.8, and I am having hard drive problems. I want to reformat my drive, then install 10.6. Can I do that, then restore my files with Time Machine? Will it restore applications?
Info:
iMac 17" Intel Core 2 Duo 2.33 GHz 2Gb Mem, Mac OS X (10.4.8)
How long should I be stuck on the screen "calculating space required to restore data"? I've been on this screen for about 20, 30 minutes. The "hash mark wheel" is spinning, but just not seeing anything new. Is this normal? My backed up data is ~100 GB.
View 1 Replies View RelatedA storm is brewing and I have no idea how to contain it. First, after April 26th, my Time Machine wasn't recognized... this was the date of my last backup, and I didn't notice it for a few days, and only confirmed it two days ago. I would plug it in, and the drive would get hot as though it were mid-backup, and stay that way. It doesn't appear in Disk Utility, it doesn't appear in the Finder, nowhere. I've taken EXCELLENT care of this Toshiba 640GB drive, and had it for two years. It was backing up just fine, and has been sitting on my desk for a few weeks.ÂMy first kernel panics began 4/30, and I've had three, with the last two both yesterday.
[code]...
There's some stuff on my time machine drive I would really, REALLY like to get. I took it in to the Apple authorized service center here, and they had no idea.My drive does not work on other Mac computers, and does not even show up. Apparently just the fact it's plugged into one makes it boot down slower... the tech guy noticed this, anyway. When plugged into a Windows, the drive itself is recognized, but only some partitions... I'm not really clear on what the guy was implying, something along these lines though. He was pointing to various partitions which were different colors, using some Windows utility, but he couldn't make any significance or conclusions based on it.
Info:
MacBook
Pro, Mac OS X (10.6.8)
So I'm currently running Mac OS 10.6.1 on my MacBook, however my External HDD which was originally working with Snow Leopard is no longer working. It is not recognized by the computer as even being there. I have never dropped it or anything, and I don't know why this is happening. since having a back up is important to me.
View 2 Replies View RelatedI am running a Intel Imac 2008 clean install SL then Lion upgrade, followed by Lion Server install.I have multiple home macs, and intnded the server as a way to monitor and restrict kids internet use.In short, it has changes/screwed up multiple programs, and complicated home sharing issues considerably. Mail on the server machine has permission problems (cannot send mail, unable to sign), Spotlight in mail is non-functioning, finder spotlight searches are inconsistent, etc.I want to revert to plain old Lion.
I have done disk utility/verify disk and verified/repaired permissions, and have 'fiddled' (i'm not an expert) in the keychain/certificates areas, but I think the best solution is a clean install of Lion. When I backup to TIme Machine, is there a way to pull a 'Lion' version of my disk image back, and just not upgrade to Server? I understand I can disable Server and turn off applications in Server, but it doesn't fix my buggy machine. My options are to back up my 250GB of music, 100GB of photos, 100GB of movies, etc on to external drives, and clean install and then reimport everything, but even that will probably mean I cant reinstall my single user licesnse of MS office, VMware fusion, etc that I didn't buy on the App store.
Info:
iMac, Mac OS X (10.7.3)
I've been away from the Mac world for awhile (Got a Unibody Macbook 2.0 late last year but my girlfriend liked it so much I gave it to her. Been using a Windows Laptop ever since). I just got a Unibody Macbook 2.4 recently and wanted to restore it with my old Time Machine Backup (stored on my Time Capsule) that I made in December 08. Unfortunately, Migration Assistance on my new Unibody 2.4 can only see my GF's MB and Mac Mini backups.
I access the time capsule with Finder and see my time Capsule backup file, however. Is there some way to get it to "recognize" it? Or did it get "corrupted" somehow and I'm SOL? Not too big of a deal I suppose but definitely makes me a bit less trusting of Time Machine (I held it in high regards).
My '08 Mac Pro got it's logic board replaced last week because it wasn't seeing all the RAM I had installed, and now it's not recognizing my Time Machine drive as a Time Machine drive. The drive mounts fine (internal bay 4), all the stuff is still on it, I can still read/write to other folders on the drive. When I go into Time Machine it just shows that there're no back ups. When it tries to do a backup it just says "Backup failed". I ran disc utility and repaired permissions, still no dice.
View 5 Replies View RelatedI needed to change my backup volume's name. Now it's not recognized by TimeMachine any more. It seems I can only choose this volume again AND delete older backups, which I do NOT want.Â
How can I just continue on this volume with its new name?
I have an external hard drives with 3 partitions: 2 are TM backups of my two computers, and the other is just a file storage partition.Â
I am trying to migrate files onto a brand new hard drive from a TM backup. I formatted the new HD and installed OS 10.9 on it, but when I open Migration Assistant, it only recognizes the other computer's TM backup and the file storage partition, not the Macbook TM backup partition. Additionally, this partition (when I view it on my other computer) shows up with the orange USB icon rather than the green TM icon.Â
Does this mean my backup is corrupted? Is there a way to fix this without going back into my laptop and switching back to the old hard drive and wiping out the old backup and backing the whole thing up again?
I have an external hard drive which shows all time machine backups but I cannot restore to an earlier time, restore button blanked out.
Info:
iMac (21.5-inch Mid 2011)
After I upgraded to Yosemite, my MAC Time Machine backup drive is no longer recognized and the process freezes when I try to re-install the drive from the drive's software.Â
Info:
MacBook Pro, OS X Yosemite (10.10.1)
I have a desktop G5 that I'm in the process of selling. I have been using Time Machine for my backups and am picking up a MacBook Pro to replace it as my requirements are now much more mobile.
My question is simply this; can I restore my system, backed up from my G5, to my new MacBook?
i've got a niggling problem that i'd like to get sorted. I've searched the forums, but can't find anything that relates exactly to my problem.
I restored my pro from a time machine machine backup and now it displays the time incorrectly (-1hr). 'Set date & time automatically' is checked in system prefs which makes the problem even weirder. I'm using the Apple Europe sever too.
I've read somewhere about deleting a hidden file to solve the problem, but there isn't enough information to execute.
I have a 3rd Party NAS (Iomega Home Media Network Cloud Edition 2TB) and MacBook with OSX 10.6.8. I did run a first TM full backup over Ethernet (around 240GB) because of the extremely slow transfer speed over WiFi via the AirPort. It went Ok (after several tries and reading here in the forum). Then, I disconnected my MacBook from the wired network, so futures frequently backs-up happen wirelessly, however, it seems that it did not recognize the first full back-up, asked for re-doing it again from scratch and erased my first full-backup-over-Ethernet.
I've seen that the MAC address is used as part of the sparse bundle file name; obviously, there will be a conflict here because Ethernet and AiPort do not have the same MAC address (of course !).I will run a brand new full first backup over Ethernet, but I'd like to know what do I have to do for getting it recognizable for futures backups over AirPort?
Info:
MacBook, Mac OS X (10.6.8)
I have a MBP 13" 2009, and had a HDD fail yesterday. I have an external HDD for backups with timemachine (WD 1Tb), with daily backups.I bought a new internal hdd, plugged it in today, and when presented with the install options, I selected recover from backup. There, my drive appears (in yellow), but when pressing continue, I get a message: No system backups found.
I looked around on forums and people suggested that a normal installation should be done followed by migration assistant. When I try using migration assistant and select Time Machine backup, the next page just shows up empty with a rotating thing in the middle.
When I browse the Backups.backupdb folder, everything is there, including my last backup from Saturday. I see that I can recover my files, which obviously is the most important bit, but I would like to restore Applications, settings etc, as to not waste too much time.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
My MacBook (Early 2006) is faulty and is soon to be replaced by Apple. They are replacing it with a MacBook (Early 2008).
I have 10.5.2 on my MacBook, and back up regularly using Time Machine.
My question is, when I receive the replacement MacBook, how can I restore my data from my faulty MacBook to the new?
