Hardware :: Time Machine Backup (Stored On TC) Not Recognized?
May 2, 2009
I've been away from the Mac world for awhile (Got a Unibody Macbook 2.0 late last year but my girlfriend liked it so much I gave it to her. Been using a Windows Laptop ever since). I just got a Unibody Macbook 2.4 recently and wanted to restore it with my old Time Machine Backup (stored on my Time Capsule) that I made in December 08. Unfortunately, Migration Assistance on my new Unibody 2.4 can only see my GF's MB and Mac Mini backups.
I access the time capsule with Finder and see my time Capsule backup file, however. Is there some way to get it to "recognize" it? Or did it get "corrupted" somehow and I'm SOL? Not too big of a deal I suppose but definitely makes me a bit less trusting of Time Machine (I held it in high regards).
View 3 Replies
ADVERTISEMENT
Mar 18, 2009
I recently sold my mini and my ministack, but before i did i took the last 4 time machine backups. I stored this image on my gf's imac, in hopes that when i got my new macbook i could restore everything i had on the mini onto the macbook. So, on her computer, i have xxxxx.sparseimage, i enabled sharing on her computer through a local network, and shared it. When i get on the network, i can drag the file to the desktop, go in and see all my stuff. Ive tried everything through the network to try and migrate it, with migration tool, but it'll just start migrating her computer. i have another external HDD, am i going to have to format it and move the backup to it, then from it to my macbook? can i get a bridged usb-usb cable and just yank it off her computer? does anyone know what im talking about?
View 1 Replies
View Related
Mar 16, 2009
I'm trying to figure out someway to back up my music, stored on my ubuntu box, to my time machine drive. I can connect either as an afp share or a samba share.
View 1 Replies
View Related
Mar 27, 2012
I have TM backing up to my external usb drive. Just curious but where and what's the folder called while TM is backing up? Is it called Backups.backupdb?Â
View 3 Replies
View Related
Dec 7, 2014
I have an external hard drives with 3 partitions: 2 are TM backups of my two computers, and the other is just a file storage partition.Â
I am trying to migrate files onto a brand new hard drive from a TM backup. I formatted the new HD and installed OS 10.9 on it, but when I open Migration Assistant, it only recognizes the other computer's TM backup and the file storage partition, not the Macbook TM backup partition. Additionally, this partition (when I view it on my other computer) shows up with the orange USB icon rather than the green TM icon.Â
Does this mean my backup is corrupted? Is there a way to fix this without going back into my laptop and switching back to the old hard drive and wiping out the old backup and backing the whole thing up again?
View 5 Replies
View Related
Dec 8, 2014
After I upgraded to Yosemite, my MAC Time Machine backup drive is no longer recognized and the process freezes when I try to re-install the drive from the drive's software.Â
Info:
MacBook Pro, OS X Yosemite (10.10.1)
View 3 Replies
View Related
Feb 5, 2012
I have a 3rd Party NAS (Iomega Home Media Network Cloud Edition 2TB) and MacBook with OSX 10.6.8. I did run a first TM full backup over Ethernet (around 240GB) because of the extremely slow transfer speed over WiFi via the AirPort. It went Ok (after several tries and reading here in the forum). Then, I disconnected my MacBook from the wired network, so futures frequently backs-up happen wirelessly, however, it seems that it did not recognize the first full back-up, asked for re-doing it again from scratch and erased my first full-backup-over-Ethernet.
I've seen that the MAC address is used as part of the sparse bundle file name; obviously, there will be a conflict here because Ethernet and AiPort do not have the same MAC address (of course !).I will run a brand new full first backup over Ethernet, but I'd like to know what do I have to do for getting it recognizable for futures backups over AirPort?
Info:
MacBook, Mac OS X (10.6.8)
View 12 Replies
View Related
May 30, 2012
I have a MBP 13" 2009, and had a HDD fail yesterday. I have an external HDD for backups with timemachine (WD 1Tb), with daily backups.I bought a new internal hdd, plugged it in today, and when presented with the install options, I selected recover from backup. There, my drive appears (in yellow), but when pressing continue, I get a message: No system backups found.
I looked around on forums and people suggested that a normal installation should be done followed by migration assistant. When I try using migration assistant and select Time Machine backup, the next page just shows up empty with a rotating thing in the middle.
When I browse the Backups.backupdb folder, everything is there, including my last backup from Saturday. I see that I can recover my files, which obviously is the most important bit, but I would like to restore Applications, settings etc, as to not waste too much time.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Dec 11, 2009
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
View 7 Replies
View Related
Oct 26, 2008
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
View 3 Replies
View Related
May 3, 2012
A storm is brewing and I have no idea how to contain it. First, after April 26th, my Time Machine wasn't recognized... this was the date of my last backup, and I didn't notice it for a few days, and only confirmed it two days ago. I would plug it in, and the drive would get hot as though it were mid-backup, and stay that way. It doesn't appear in Disk Utility, it doesn't appear in the Finder, nowhere. I've taken EXCELLENT care of this Toshiba 640GB drive, and had it for two years. It was backing up just fine, and has been sitting on my desk for a few weeks.ÂMy first kernel panics began 4/30, and I've had three, with the last two both yesterday.
[code]...
There's some stuff on my time machine drive I would really, REALLY like to get. I took it in to the Apple authorized service center here, and they had no idea.My drive does not work on other Mac computers, and does not even show up. Apparently just the fact it's plugged into one makes it boot down slower... the tech guy noticed this, anyway. When plugged into a Windows, the drive itself is recognized, but only some partitions... I'm not really clear on what the guy was implying, something along these lines though. He was pointing to various partitions which were different colors, using some Windows utility, but he couldn't make any significance or conclusions based on it.
Info:
MacBook
Pro, Mac OS X (10.6.8)
View 7 Replies
View Related
Oct 13, 2009
So I'm currently running Mac OS 10.6.1 on my MacBook, however my External HDD which was originally working with Snow Leopard is no longer working. It is not recognized by the computer as even being there. I have never dropped it or anything, and I don't know why this is happening. since having a back up is important to me.
View 2 Replies
View Related
May 1, 2008
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
View 1 Replies
View Related
Mar 20, 2012
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files. Â
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup. Â
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.Â
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Apr 30, 2012
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
View 1 Replies
View Related
Jan 9, 2010
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
View 3 Replies
View Related
Mar 9, 2012
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
Info:
iMac, Mac OS X (10.7.3)
View 6 Replies
View Related
Feb 3, 2010
My '08 Mac Pro got it's logic board replaced last week because it wasn't seeing all the RAM I had installed, and now it's not recognizing my Time Machine drive as a Time Machine drive. The drive mounts fine (internal bay 4), all the stuff is still on it, I can still read/write to other folders on the drive. When I go into Time Machine it just shows that there're no back ups. When it tries to do a backup it just says "Backup failed". I ran disc utility and repaired permissions, still no dice.
View 5 Replies
View Related
Mar 20, 2012
Hard drive recently failed. Replaced hard drive and used Time Machine to recreate system. Everything seems ok, but I cannot install software. It prompts for a password, as it always has, but the system is rejecting my password as invalid. This is the same password I have had for years (yes..i know). I cannot figure out how to reset it since it doesn't recognize the original password.
View 8 Replies
View Related
Aug 20, 2014
I needed to change my backup volume's name. Now it's not recognized by TimeMachine any more. It seems I can only choose this volume again AND delete older backups, which I do NOT want.Â
How can I just continue on this volume with its new name?
View 3 Replies
View Related
Nov 19, 2008
I just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.
Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.
View 2 Replies
View Related
Jan 11, 2011
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
View 9 Replies
View Related
May 3, 2009
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
anyone have this problem? how can i fix it?
View 1 Replies
View Related
May 23, 2009
Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
Some quick screenshots:
View 4 Replies
View Related
Feb 10, 2012
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.Â
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
Info:
Mac OS X (10.7.3), time cap or Time Machine
View 3 Replies
View Related
Jun 30, 2014
There are 3 macs:
A: an old macbook (the white one)
B: a modern macbook pro (retina)
C: another modern macbook pro (TBD)Â
I am giving away B now; I expect to get C in 2 months time; I keep A with me all the time.
The goal is to migrate all of the data from B to C. I have Time Machine backups of B.
Since the transition is a long time (2 months), I need to keep working on my data during this period. For this I will use A. This will generate new files, modify old ones, ...
Since A's HDD is much smaller than B's backup, I can move only part of them.
By the way, I have totally erased A and used migration assistant to restore part of my old data from B. So, when I use A now, I do it with my same account as in B (and the same I will use in C).
How do I manage my backups in such a way that, when I will get C, I can safely move all of the data I had in B plus all of the changes and modifications that I have done during the 2 month transition?
Can I just continue to use Time Machine (on A) to update the old backups? I am afraid that some mess could be created because the computers are different (before the backups were taken on B, while now on A), even the present data are different (because now A only contains a subset of the original B data, which I do NOT want to lose), the good point is that the user is the same.
View 3 Replies
View Related
Mar 11, 2009
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
View 7 Replies
View Related
Mar 11, 2012
I have a MacBook Air and a Time Capsule - both from november 2011.Using Time Machine is givning me som problems.It works fine for some days, an is backing up as planned.But at least 5 times since I got the Time Capsule, Time Machine is asking to make a full Backup, and when I look in Time Machine, it says that there is no "old backup". It has been runing since november 2011.When I start a new backup, as it ask for, it takes at least 24 hours to finish - some times even longer.Is this normal? If not, what do I do?
Info:
Time Machine, Mac OS X (10.7.3)
View 6 Replies
View Related
Jun 19, 2014
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation homeÂ
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.Â
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).Â
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
View 5 Replies
View Related
Dec 6, 2010
So I bought a brand new WD 1TB Elements (USB) to use with Time Machine. I've never used a Time Machine before. I have a MBP13 with a 250GB disk, using the latest Snow Leopard, all updates installed. Formatted the drive to Mac OS Journaled (extended) and set it to use with Time Machine. Works until about 15-17GBs is copied over, than it fails:
1. If I start over it fails very soon after, no matter how many times I retry
2. No matter how many times I reformat it, it always fails
3. I tried one trick I googled - deleting the "inprogress" file - does NOT help
4. SMART status is verified
5. There are no problems if I verify/repair the disk.
View 2 Replies
View Related
