I am trying to better understand the security aspect of the 802.1x protocol. I have a 2006 iMac 20" running OS X Lion 10.7.4 with an Apple Airport Extreme Base Station. Is there any benefit in running a 802.1x network in a home environment?
Info:
iMac, Mac OS X (10.7.4)
Not sure even where to start. I have the Apple extreme router, WD network drive and 2 express units throughout the house. Looking to access the netwrk drive from MAcbook and TV that has internet connect through BLuRay disk.Router is behaving ok and the network drive is set up.Not sure where to from here. Any manuals available to take one through step by step?
Info:
iMac, Mac OS X (10.7)
I would like to know if there is a link to information on how to join pc to a mac network.
Info:
iMac, Mac OS X (10.7.2)
Until now I have been connecting to a wifi network that I use at home. It is fairly slow so for large system updates I connect to a wifi dongle. When this wasn't working last week for the new system update, I came onto the forum and was advised to change the DNS settings for the wifi dongle. It all worked. Since the system update however, my existing network will not connect to the internet at all. It appears in the wifi list but won't connect to the internet. Also, when I started to look for a solution I realize that I do not have Airport as a choice in the wifi list in preferences.
Info:
iMac, Mac OS X (10.7.2)
my iMac 'sees' my PC on the local network and can access all files etc, my PC cannot 'see' m.
Info:
iMac, Mac OS X (10.7.3), PC has XP operating system
I work wireless and I my IMac disconnects from the network several times in the day. It is pretty frustrating. My internet provider did every thing even changing the wires out side my house. The rather is located two matters from my computer. It is new as it is my IMac. I took my IMac to Futureshop and they said every thing is fine.
Info:
iMac, Mac OS X (10.7.3)
This is a new iMac with Lion. The network is ok because all my other devices work fine with it. The network is in the list and when I select it my mac joins without problem, but won't join it automatically. I've also tried to move my network up in the list but that doesn't seem to work either.
Info:iMac, Mac OS X (10.7.3)
I have recently switched my internet service to Knology. I have an iMac (running OS 10.6.8), it has a 2 GHz Intel Core 2 Duo processor and 4 GB of SDRAM. Both I and my wife have noticed that at times (more than it should be happening) when we try to load a webpage, it freezes and will not load or takes a long time to load. I am using Safari 5.1.2. Our modem is a Arris - 76DA cable modem wireless router combo. Is there a setting in the System Preferences or in the modem that needs to be reset? It seems to work without a problem on my wife's Dell laptop.Â
View 1 Replies View RelatedIn recently reconfiguring my network, my IMac appears to have two listings of the same network within Show Networks. The iMac keeps of trying to join to the wrong one. Where will I find these do that i can delete it.
View 2 Replies View RelatedI changed my network name and now it won't connect to the internet.How do I put in the new password (that goes with the new name)?
Info:
Aluminum MacBook, Mac OS X (10.5.7)
I recently purchased an Apple for the first time after years on PC's. I'd like all my pictures, music & other files currently on my PC on my Mac as well but I am having trouble getting them to communicate.
Info:
iMac
How do I change my network password?
Info:
iMac, Mac OS X (10.7.3)
We have an issue with adding a network icon to the dock. Some machines display it fine and others don't.Â
I remember him telling me that using workgroup manager doesn't work so he used to do it another way using a plist file or something along those lines. I've found the file he means but it's a .app file which contains a unix exe?Â
I've googled this problem and there seems to be people doing this with profile manager but we don't have this software. I assumed this could be done with workgroup manager but for some reason it doesn't.Â
The shortcut needs to simply go to \servernameshareÂ
The other complication i'm going to have is that the \servernameshare is being moved to a different location as it's grown so big we have run out of space. The shortcut will need to be edited with the new sharename.Â
Info:
iMac, Mac OS X (10.6.8)
on my desktop my login window has a red radio button and a tag that says 'network accounts not available'Â
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.2), Lap MacBook Pro
I have installed my HP designJet 500+ printer on to my iMac g5, which opperates OS 10.3.9 and I have no problems printing directly. However, I am trying to print to the same printer using my intel based iMac opperating OS 10.6.8 but I can't seem to 'see' the printer on the network.Â
I have made sure that the share printers button is checked on both computers and I have no problem establishing a netwok between the two computers (via ethernet).Â
Although the designjet is market as both shared and default printer on the G5, it doesn't actually appear in the shared printers list on the computer.
Info:
iMac, Mac OS X (10.6.8)
got new i mac and want to connect to a homegroup printer, how?
Info:
iMac (21.5-inch Mid 2011), iOS 5.1.1
How do you change your connected Network name
Info:
iMac, Mac OS X (10.7.4)
My son called and said his wi-fi stopped working. His internet connection is good and he can connect directly to the router and get a connection, however, he needs the wi-fi. He has powered down the IMAC,router, modem with no luck. Under network preferences it says not connected, with yellow light. No network IP address for the router as I assume it cannot find it. He is running OS X 10.6
Info:
iMac, Mac OS X (10.6)
What equipment do I need to migrate my Imac to my network at my office wirelessly?
Info:iMac (27-inch Mid 2010), Mac OS X (10.6.8)
For some reason, my network appears twice in the list of available networks. How has this happened? Is it possible to delete one?
Info:
iMac, Mac OS X (10.7.1)
I have a new imac but for some reason the ical feature won't turn on because it says "a secure connection could not be established". Yet the mail/notes and chat functions both work. ical works between my iphone and ipad, just not the mac. Â
Info:
iMac
I am teaching in a school and would like to know how to create a shared folder on the network that students can access from any computer on the network.
Info:
iMac, Mac OS X (10.5.8)
Does anyone have a clue about this. I've tried all the basics.
Info:iMac, Mac OS X (10.7.3)
I just got a new Intel Mac Pro (10.7.4) and cannot access my network. My older G5's (10.5.8) used afp to log in but now I get this message.There was a problem connecting to the server. The version of the server you are trying to connect to is not supported.Is there something I'm missing? My networked is wired and runs to Windows based server. All my other Mac G5's can still access the server the way I always have before.
View 3 Replies View RelatedPeriodically the wireless network has to be manually reselected in airport even after several attempts to save the preferences. It appears as the preffered network but simply won't stay connected. It is an existing network that has worked just fine with an older PC, and a macbook. The only issue is with keeping the iMac online. Is there a way to correct this so that the "network not selected" nonesense ceases and it remains connected?
Info:
iMac (21.5-inch Mid 2011)
I've bought a powermac G5 (april, 2005) without an airport card. If I want I connect it wireless, what is the best and cheapest way to do it? Is it:
(A to buy an airport card with antenna
(B to buy an airport express station and connect it via Ethernet Or (C to buy an third party antenna to connect to the router So again: is it possible, what works the best, and what is the cheapest. NB. My wireless network is going via a time capsule. The router is on the first floor and my Mac is on the third. Powermac G5, dual core 2,3 MHz, 2.5 gb ram, 230 gb hard drive?
Info:
PowerMac, Mac OS X (10.4.11)
How to add Mac27" to existing home network? and read files on other PC computers (Window7).type of connection:All computer (PC & Mac) connect to router (ethernet or wireless), then connect to internet.Â
condition:internet works fine on all computer (PC & Mac).existing 4 PC communicate well (share files & printers), my problem: can NOT add Mac into existing home network. I tried SYSTEM PREFERENCES, then NETWORK, then ...... several times could not make it work.Â
Info:
iMac, Mac OS X (10.6)
I lock the network preferences panel in the System Preferences, and the 10.7.4 Lion OS unlocks them when the computer restarts or when it is shut down and turned back on. I want to keep them locked. Is there a way to stop Lion from changing your preferences without asking?
Info:
iMac, Mac OS X (10.7.4)
For a program I have to access a local disk as network drive. The path has to be the network path and not the local path (with the disk name) how can I do this?
Info:
iMac, Mac OS X (10.7)
How do I change the password on my guest network? We are having a new housesitter next week and I don't want him using my home network. I have a guest network, but the passwords are the same. (I know what you're thinking). How can I change the guest one? Am using Airport btw.
Info:
Mac OS X (10.7.3)
