I have a xerox phaser 6110 wire connected to my router. My imac is also wire connected to my router. I have installed the latest printer driver on my imac but when trying to print it does not respond. I suspect it's something to do with telling the mac where to look for the printer but my mac skills are very low.
Info:
iMac (27-inch Mid 2011)
I thought I'd upgrade from 10.4.11 to 10.5.8, Leopard. All went well except now I can't load the print driver correctly to use all the printer facilities. Yes, I went to the Xerox site, downloaded the drivers then through System Preferences looked for the printer to add. Can't see anything that looks like a Xerox, nothing in Appletalk. Go to more printers and it gives me the option of HP IP Printing, two Epsons and a Canon under auto. So I look at Manual. I did get it to work manually by typing in the IP address, but that doesn't allow me to use any of the features of the printer, just the basic print. I did note that there is something under Windows in the System Preferences, but I'm loathe to fiddle with this until I know what I'm doing. I'm at my wits end. Otherwise it's back to Tiger on my backup which will cause other issues. G4 PowerPC, 1.5Ghz: 2GB DDR SDRAM
View 1 Replies View RelatedI've tried everything, and cannot get my 7400 Xerox Phaser to print any Adobe document. I'm using CS5. I've downloaded drivers, driver updates, driver patches. I've reinstalled the Adobe programs. I do get a "communications error" on some other programs, but they still print. I used to get this message with the Adobe programs, but they were still printing until yesterday. Xerox says it's a "Mac thing." Adobe's site is absolutely with no support?
Info:
Mac Pro, Mac OS X (10.7.3)
I have 2 Xerox 7345 copier/printers in our office and none of the macs will print to them. Xerox claioms they are compatible and I have downloaded the drivers they supply. When I go to print, the mac looks like it is printing, but nothing prints out. Other printers work fine from the same macs. The mac on my desk is a power PC G4 running OS X 10.4.11.
View 3 Replies View RelatedAfter a re-install. my duplex option is greyed out now.
View 1 Replies View RelatedMy office just received a xerox Workcentre 7345 and our iMac's can't print from Adobe CS3. They can print from every other program, just not Adobe. The computer I use is a PowerPC G5 and I don't have any issues with it. All of the Mac's are setup the same, have the same operating system and we are on a shared network. We also use the Accounting Feature where you enter a code into the print dialogue box. I am perplexed. I called Xerox tech support and they have no idea what it could be either.
View 1 Replies View RelatedAnyone have a Xerox with a Fiery X3e controller and 10.7 working?
View 1 Replies View RelatedWe have a Xerox WorkCentre M118 which used to print perfectly ok until we upgraded to Mac OS10.6 and now cannot see the printer on the network or print to it. Xerox do not support this printer for 10.6.
Info:
Mac OS X (10.6.8)
I should have posted in this forum first as its printer related. But does anyone know how to get the above printer scanner working with snow leopard?
View 3 Replies View RelatedI am desperate to find the correct driver for the p205b docuprint printer I know that the one on the fuji site is wrong and you need to install a driver for another model as I found this in a forum last year and successfully installed on another mac but now I don't know where I got the info from.
Info: iMac
yesterday asked if. should be running out of disk space if my 320 gb has 248 gb of used space. In the using your. Intel based i Mac secttion of this fourm It appears out of space on the HD .can upgrade the HD If so what steps i must take to do so and how much bigger external must buy if 1 tb HD verse a 3 TB and will to buy the external HD before reach over 500gb of used space on the back up I now have.
Info:
iMac, Mac OS X (10.7.4)
Has anyone tried to upgrade their old iMac G5 with a new Intel core Duo processor? If so how do I go about installing one?
View 6 Replies View Relatedjust purchased an intel imac (the latest) and wishes to transfer the data from the old non intel G5 to this new mac. During the procedure he has been asked for a passKEY not a passWORD and he has no idea what this is.
Info:
iMac, Mac OS X (10.6.8), Mac G5, imac intel, Macbook pro
OS X 10.4.3 IMAC Intel Core Duo. I backed up my HD on an external drive so I could upgrade to Snow Leopard. I wanted to test that I could boot from the external drive and selected it as my start up drive. When I did a restart I got the Apple and the turning gear and then suddenly a black screen with this on it:
"May 28 22:23:11 Launched:com.apple.nibindd:respawning too quickly throttling, exited system abnormally bad system call too many failures in succession I have no name!"
I tried several dozen times with no luck. I think when I made the copy of my HD on the external HD I may have neglected to make it "bootable" (moving too quickly). My internal CDROM is busted so I use an external CDROM. I can't boot from it at all with the proper start up buttons pushed. It keeps trying to boot from the external drive. If I turn the external drive off and try to boot from the external CD I just get the grey file with the ? in the middle of it.
I tried using another external HD I have with OS 10.4 on it, but it won't recognize it either with fan, alt, shift, delete pressed at start up. My internal drive (a Seagate 2 tarabite drive) works great, but how do I reset it as the start up drive when I'm stuck with this black screen. One more thing, when I try to reset PRAM I don't get a second gong.
Info:
iMac Intel Core Duo 2GHz 17", 2006 model
Shut down computer last night because after restarting it would not open. A little gear-looking circle just spins round and round. Started up computer this morning and it's the same situation . .gear circle just spins around. I know the battery is fully charged.
I'm using a different computer to write this.
After connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode, were unsuccessful. I could not switch to another user. Restart is only possible at all from installation disc but thereafter problem remains the same.
View 6 Replies View RelatedI need to install Lion to move from mobile.me to icloud, but my imac has an Intel Core Duo processor. Can I upgrade to Intel Core 2 Duo?
Info:iMac, Mac OS X (10.6.8), Lion Upgrade
I am trying to find how much hard drive space is available on my Intel based 2007 iMac.
Info:
iMac, Mac OS X (10.6.8), intel iMac
Will Lion OS run on a 2GHz Intel Core Duo?
Info:
iMac, Mac OS X (10.6.8)
My 5 year old iMac has a 2.16 GHz Intel Duo Core 2 Processor with 1 GB of Ram. I'm running OS X 6.8 and am told that I can't upgrade to OS X 7.My only connection to the internet is through a MobileMe AirPort. I have not ethernet or firewire connection.Without OS X 7, I can't access iCloud. How do I stay connected to the internet after June 30, 2012 when MobileMe is discontinued?
Info:
iMac, Mac OS X (10.6.8)
My iMac was working perfectly till two days ago, I shut it down normally, but haven't been able to start it since then. When I press the start button I can hear the HD and fans working, and also the USB ports are powered, but screen keeps black and no boot tone.
Since I have a bluetooth keyboard, I am not able to start in safe mode..
Info:
iMac, Mac OS X (10.6.1)
all of my apps are very erratic, ex; windows opening and closing by themselves, blue tooth keyboard very buggy, unable to change personal preferences, etc.
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.4)
I have an iMac 2.8 GHZ intel core i5 that, without any warning or strange sounds, shuts completely off. It is 27-inch, Mid 2010 model. I have 16gb ram running Lion 10.7.3.
Info:
iMac, Mac OS X (10.7.3)
I have a 2007 20 inch Intel core 2 duo iMac and an LG 46" LCD tv. I bought an HDMI cable and a Mini DVI to HDMI adapter but cannot get them to work together. Nothing happens when I click on detect displays in the system preferences.
Do I possibly have the wrong version on Mini DVI, for instance DVI-D instead of DVI-I?
Info:
iMac, Mac OS X (10.6.8)
This has been happening a lot lately. I've tried the Apple hardware test and it passed successfully. I reloaded Lion OS X but I still see an occasional problem with program freeze that I never saw before.
Info:
iMac, Mac OS X (10.7.3)
I have an 17" iMac intel that had 10.4.11 installed on it. I am trying to install 10.5.4. I got to the Language screen , selected English.
Hit continue. A window popped up stating, "This software cannot be installed on this computer." With OK and Restart Buttons. Using Disk Utility, I Erace the hard drive ran Verfy and Repair on the Hard drive. Tried again. Same Message.
Info:
iMac 17-inch intel, Mac OS X (10.5.8)
How can I tell if my iMac is intel based?
View 1 Replies View RelatedMy one week old iMac 2.7GHz Quad-Core Intel Core i5. first started problems by not goping to sleep even when I forced it.
I shut it down using the shut off button and unplugging it from power for more than 5 munites.
I turned it back on, it does the usual startup chime and then gray screen. I have restarted twice from the shot off button and still getting the same result.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
I'm sure this has been asked before so please forgive me. I have found arguments that say just use Migration assistant to some saying I need to cherry-pick certain items.
Info:PowerMac, Mac OS X (10.4.11), 4 GB Ram
Do the new iMacs come with 3rd Gen Intel chips?
View 2 Replies View Related