wants a HDD that will work with both windows and mac, am I right thinking to format it in FAT32?Its a 500gb WD elements drive. I'm aware that files larger than 8gb cannot be used in this format but can you still transfer say 30gb of smaller files?
Is there any way to get the wireless mighty mouse to work in windows 7 running via bootcamp tried to pair it but no luck.
View 7 Replies View RelatedDoes anyone know or have the same problem where pressing the F7, F8, F9 keys (which are previous, stop/pause, and forward) doesn't work in iTunes unless iTunes is the "active" window? I know that in OS X that if i pressed those buttons, it would do it even if I was in another application, but in the Windows 7 version it won't do it if another application is "active." Also, the same applies to the Apple Remote.
View 2 Replies View Relatedi have searched a lot but haven't been able to solve my problem
i have a windows XP box on my network
i can connect to the C$/D$ admin shares via smb://.... only when the windows firewall is OFF - when i enable it, i can't connect
i have allowed ports 135-139,445 in the firewall, but still no luck
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
View 1 Replies View RelatedI was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
So I finally got Windows 7 64bit installed on my MBP 2.33 machine.
However, from the guides, I should just insert my leopard disc and it should run. This is the thing, I don't know where my leopard disc is (i've been moving a lot lately due to being unemployed) and its either lost or packed away somewhere. I have a backup copy on my time machine drive and haven't tried that yet. I downloaded a 2.1 extraction and burned it to CD though. I inserted the CD and I can see in windows 7 three applications. One is Windows XP, the others are Windows Vista 32 and Windows Vista 64. I click the Vista 64, but nothing happens at all, and no drivers are isntalled.
I just bought a new MacBook pro 1 week old. I partioned my hard drive and installed a clean copy of Windows Vista Ultimate on one side. I then downloaded skype, but my internal microphone will not work. I tried everything. Can someone help me out with this issue.
View 3 Replies View RelatedI've having trouble getting the "webcam" option on "live messenger" on my MAC. There is no option for starting a conversation with a cam and when people request a cam conversation it suggests that i get "window live v7" I've already got this. Do I need a separate webcam instead of the built-in one i have on my laptop?
View 2 Replies View RelatedI have been trying to install Windows 7 X86 RC1 on my brand new early 2009 iMac and have been having the same problem every time.
Initial installation goes very smoothly, but all the trouble begins when I load the Boot Camp setup.exe from the Leopard disc.
During Boot Camp installation I get a compatibility warning about some of the Apple Boot Camp drivers working correctly with this version of Windows.
If I go ahead with the installation then what happens is I get a BSOD and then Windows becomes un-bootable. This is repeatable as it happens every single time I do the installation.
Things initially seem to work up until I load boot camp assistant from the Leopard install disc, so I'm wondering if there are other drivers available that play well with Windows 7 for my iMac that I can try? I've followed several Boot Camp tutorials for iMac with Win7 and am pretty sure I am doing everything correctly, but things just aren't working.
I used Boot Camp to put XP on my iMac. If I get Parallels, will it be able to give me access to the files that are on the currently existing XP partition?
Or will I have to re-install XP onto the Mac partition and transfer all my files from the old Boot Camp XP to the new Parallels XP?
I have a Macbook Pro 15" , C2D 2.33ghz. I have the 7100 version of Windows 7 and everything worked perfectly except for the sound.
No matter which bootcamp driver I try or even Realtek's own vista one nothing works.
I downloaded the bootcamp 2.1 drivers and everything installed correctly , including the realtek ones. All the hardware looks fine in device manager but I dont hear anything out.
Should the default be speakers? It seems that it keeps the driver as microsofts own and it doesnt say anything about realtek. Could that be the problem?
I did not try the microphone jack yet but will in a few minutes.
Even if there is a hack , Im willing to try it. What is the exact audio chipset on this model of macbook pro?
I want to know if anyone can identify compatibility issues with this set-up, it's for architecture school and it is very important that it works.
17" Macbook Pro 2.8Ghz
8GB RAM
128GB Solid State Drive
Here's where it gets confusing:
through Boot Camp 3.0, run Windows 7 Home Premium
run AutoCAD 2010
run 3Ds Max 2010
run Revit Architecture 2010
(Each of these have well-documented problems running in Boot Camp regarding broken licenses, however, no information I can find since 2008 identifies issues. Autodesk's website does specifically say each of these products are supported on OSX through Boot Camp.)
I will be saving all files to either an external HDD (these also have been documented to cause problems concerning the license in Boot Camp, I am presuming that since Autodesk now supports Boot Camp, this issue has been/will be resolved through Autodesk) or a networked storage system at the university.
OSX will be used primarily for using Adobe CS4 Design, OpenOffice, and internet browsing. Basically, pleasure use with a minimum of curriculum-related applications (except for CS4).
I'm running Build 7000, and I can't get my Mighty Mouse to pair with my computer. Can anyone give me advice as to how things can wind up working?
View 4 Replies View RelatedI just installed Windows 7 RC and I installed all the bootcamp drivers that were in the Disc 1 that came with my mac. It installed everything else like the sound fine but I can't get the Aero feature to work.
Also, I tried installing Flash and it said it installed but when I open up Firefox, it tells me Flash is not installed.
ive been using my clean win7homepremium install for about 4 weeks now. i have the video card working nicely and all seems to be well, i play modernwarfare2 on it and it is all good... however (there is always one..)
the mic doesnt work... it seems to be recording but at a super low volume. i check win7 sound control and the recording is set to 'microphone' but no dice. i turn up the boost and volume to full and tap the mic on top of the display and i get 3 green bars...
i was hoping the 3.1 updates would fix it, however i cant get anything to install... its like its an update for vista, not an update for people already running windows 7.
I have an iMac with a 230gb hard drive, and I've just used boot camp to create a 50gb partition for windows, all seems to be going smoothly enough.
Now, I'd like to be able to take a good chunk of the remaining hard disk space and create a partition that will work between mac osx and windows.
At the moment:
Mac OSX partition = 180gb
Windows = 50gb
I'd like to make a partition (about 120gb) from the mac osx side, and label it "audio drive" (i use audio software and i'd like to run the data on a separate location to the software).
How can I do this in such a way that both OSX and Windows XP will recognise the "drive" or partition? Im assuming I'll have to use Fat32, however Disk Utility won't give me that option (not that I can see anyway)
Edit: The OS's are Leopard and XP Service Pack 3
Im just curious if Bootcamp for Windows XP with 1 GB of Ram will work. I know it reccomends 2GB of RAM but I want to know if I can still do it. If not then I have nothing to worry since Im getting a RAM upgrade in a few weeks.
View 3 Replies View RelatedThis is a problem I've noticed on two Macs I currently own. First I had my 20" iMac with Vista installed, and currently I have a 24" iMac with XP installed. In both cases, when I'm in Windows and need to restart (for whatever reason) and want to go back into Windows instead of OS X, the Option key does not function correctly to bring up the OS select screen, and instead will go straight to OS X, as that is the default OS I have set up to boot into.
So basically, if I restart from OS X, the Option key works fine and I can choose to go into Windows, but restart from Windows and I have no choice in the matter, it makes me go into OS X. Any idea why?
My first thought is that it has to do with the fact that I'm using Apple's bluetooth keyboard (and mouse), but once the computer has actually restarted, why would it matter? Does the computer remember the BIOS from Windows when it restarts, and therefore fails to recognize my bluetooth? For the record I have to turn my keyboard off then on again when entering windows to get it to be recognized and work, but not the mouse, which works fine.
im going to use bootcamp, for completely non-internet related purposes(I dont feel like getting a virus on my 27 in mac) and I need some help here. So I got this thing that will work to be a converter with me ps3(absolutely unrelated and I was just wanting to know that if I use Window's XP in bootcamp, will it be able to detect usb's(HID i guess) and work with usb's like a Window's XP would on a PC?
View 2 Replies View Related I just recently purchased a Macbook Pro for my college major this year. I had a PC before it, but it crashed and I dont want to have to buy another one since I already payed $2000+ for the Macbook Pro. I have a few PC games that I would still like to play.
So I used Boot Camp to put Windows Vista on my Mac then installed the games to it. The three games I put on Vista were Half-Life, The Longest Journey and Grim Fandango. So after installing each of them I tried to play them to make sure they worked. Both Grim Fandango and The Longest Journey started to load the game but were interrupted with an error message, not allowing me to play. Half-Life on the other hand loads and plays perfectly.
So my question is, is there some way for me to play the two games that didnt work? If so how can I get them to work. The only reason I put Vista on was so I could play those games. And if I cant get them to work I'm probably just gonna take Vista off of my Mac.
My wife may be scoring the SAT this fall. She's required to download and use some software available only for a Windows machine. I was planning on trying out Boot Camp and purchasing XP, however, they state:
* ePEN is not compatible with Macs, Macs running Virtual/Bootcamp/or Parallel Windows, or Linux operating systems
Should I believe them? I thought Windows operated identically under BC. I'd rather not spend the $$ on Windows to test it out.
I had downloaded COD 4 on my old white MB with 1 GB RAM and 144 MB VC(intel GMA).So I was told that it will not work on that so I returned it.So my Question is that will it work on VM ware?
View 2 Replies View RelatedI installed Windows 7 on a Mac mini, 4 GB ram, with a 2GHz intel core 2 duo processor. I set up the partition, formatted it (The size was around 35 gb) and installed windows. I got on, and tried to play games (The reason for windows) but none of them will start.
View 8 Replies View RelatedI have a Mac OS X Tiger system and attempt to install windows media player for Mac, it downloads successfully. However once it has downloads the icon appears as blankpage and a .sitx file and when I attempt to open it I get a "there is no default application specified to open the document, choose application" message, I've clicked choose application but can't find one that works. Does anyone know what is wrong, and what I can do to solve it?
View 8 Replies View RelatedI want to install bootcamp with using Win 7 but I have both 32 bit and 64 bit versions. Am I able to use 64 bit without problem or do I need to stay with the 32 bit version? I am using a iMac (early 2009 model) with 8 GB ram and ATI 4850 HD video 512 MB ram.
View 6 Replies View RelatedI have a 2010 Mac Pro with two HDs - one which has an OSX installation, and one which has a Windows 7 installation (bootcamp). I need to reinstall OSX due to some system troubles and was wondering if I will need to reinstall Windows/Bootcamp all over again? If not, is there anything special I need to do or it will just work after installing OSX?
View 6 Replies View RelatedI don't suppose any clever person knows if it's possible to access the BIOS setup screen on windows XP? I've been told it usually comes about by pressing/holding the "delete" key whilst windows is loading. However, I can't seem to get it to appear on the Macbook pro whilst I load. I need to disable hyperthreading in the BIOS to get something to work, and this seems to be the way to do it.
View 6 Replies View RelatedI am on a mac Mini, and I have bootcamp installed with XP. when I am in Leopard the number pad works, but when I am booted into XP it does not. The keyboard is a wired apple keyboard, the white one not the alluminum.
View 8 Replies View RelatedI've installed win 7 twice now, and I'm finding that when I first get it going everything works as I would expect it to. However when I load back into it my direct x 9 drivers don't seem to work. I'm not sure how to fix this. By the way have tried downloading drivers again but it doesn't work.
View 4 Replies View Related