I don't suppose any clever person knows if it's possible to access the BIOS setup screen on windows XP? I've been told it usually comes about by pressing/holding the "delete" key whilst windows is loading. However, I can't seem to get it to appear on the Macbook pro whilst I load. I need to disable hyperthreading in the BIOS to get something to work, and this seems to be the way to do it.
View 6 RepliesI'm thinking about getting a Mac Pro tower from apple, and then buying two 500gb hard drives to place them in a raid 0 config. My question is, is setting up raid as easy as taking out the existing hard drive, placing both the new drives into the mac pro, and selecting raid 0 from OSX when I reinstall the operating system?? Or does the Mac have something similar to a Bios setup where I select that?
View 24 Replies View RelatedI've just got my iMac so for me it was important to get TM up and running before I start doing some real work (and hard play!).
I want to share the lessons learned from my experience and from others in this forum in the hope that it will help others.
I am using a NS4300N NAS from Promise on a LAN with an iMac running Leopard 10.5.2. I connect to it using SMB. It should work with any NAS since the instructions here are not NAS specific. I haven't tried with AFP.
My generic Page Setup dialog box e.g. used for Word etc. doesn't work.
The "Setting" menu doesn't work at all, i.e. I can see the dropdown but it doesn't accept my changes (it's fixed on "Page Settings". All other menus or choices are accepted but then the "OK" button doesn't work; it just flickers briefly and then goes back to blue. The "Cancel" button makes all contents of the dialog box disappear except for the framne and the buttons. Either way force quitting and relaunching the application is the only way to continue working in the application.
What could be the issue here?
A few specs on my hardware, printer and system:
- MacBook Pro (brand new)
- OS X 10.5.5
- Printers: hp LaserJet 4200 (main printer), iP5200R, OKI B6200, Lexmark E321. All these printers I used without problems with my old PowerBook G4.
The problem occurs with all applications using the generic Page Setup dialog, such as Word, Grab etc. In Excel e.g. all these functions work (it uses a different kind of dialog box for the page setup).
The problem could possibly have started to occur when the Lexmark printer could not be installed automatically so I assigned it another Lexmark driver, which seemed to work. But I'm not sure whether those two problems occurred at the same time.
What I tried already:
- uninstall and reinstall all printers in the Print & Fax part of the System Preferences. I uninstalled all printers and (without restart) reinstalled the hp printer only. The problem was still there, even upon restart.
- reinstall Word (first I thought it was a Word problem)
- shouting at the computer
I need a bit of insight as to how to maximize the performance (and if there is any) with dual display setups on both my MP1,1 and 5,1.
First off, MP 5,1. Currently I'm running a 30" ACD off a DVI and 23" of a MDP to DVI on a 5870. The 30" is my main work display - the 23" is pretty much running trivial things, like browsers, finder, iTunes, etc. Since VRAM is being split between the two displays, would I benefit from installing a second video card to just run the 23" monitor and dedicate the 5870 to just run the 30" ACD? If yes, what should I use? I have an old 7300, but If there's anything better out there that's non cable powered, I'll get it. Also, there are times (rarely) when I need to run Windows 7-64bit to do some 3d CAD work - would having video cards from different vendors (hence different drivers) cause W7 to go nuts (conflicts, etc)? I can live with just the 30" on W7. I want to get get the most out of 5870 and 30" ACD while not running into conflicts under OS X by introducing another video card.
Second, MP 1,1.
It's windows 7 64-bit machine only. I have OS X installed, but since I use it for work I never boot into it. It's running a 27" display (1920x1200) on DVI and 23" (1680X1050) on MDP to DVI adapter. Again, the bigger display is my work area, and the smaller one runs browsers, outlook, etc. I do 3d CAD work, so more VRAM I dedicate to my main display, better it is. So back to my original question...what are my options? I do have that 7300 hanging around, but, again, I'm not so thrilled on mixing video card vendors and drivers. Should I just get some sort of low grade Windows based ATI Radeon card (don't care much of OS X on that machine).
using the bootcamp beta on tiger since the release of 10.5.... I know that people who have already setup a bootcamp partition will continue to work. but rumor is that the bootcamp utility will no longer work (and create new paritions) on tiger.
View 7 Replies View RelatedI have a new 2010 MBP and I'd like to hook up two external monitors to it, more specifically, two ASUS VW246H 24-Inch Widescreen LCD Monitors. Either via HDMI or DVI connections. I've found various usb monitor adapters, but i've read that many can't quite 'keep up' and I really can't seem to find a solid solution out there.
So does anyone have a dual monitor setup they currently use, if so, what are you using to connect the mini display port to both external monitors.
The page setup dialog doesn't work on my new(ish) MacBook Pro. At first I thought it was just a problem with Excel, but the same thing occurs in Word, when trying to print pdfs within Acrobat, everywhere. When I bring up the dialog box to change the paper size or format, it lets me click on what I want, and the OK box lights up, but when I click 'OK' nothing happens. I can't make it register the changes. I've tried deleting and then reinstalling the printer, to no avail. What could the problem be?
View 4 Replies View RelatedI am trying to setup photostream to work with two iPhones. I have created a me.com account for one of them and a gmail.com account for the other iPhone. The me.com account works for photostream but I cannot get the gmail account to work. The me.com account says that it is the primary account. Does this mean that photostream only works for one account?
Info:
iMac, iOS 5.1.1
I just got my new Mac Pro and installed a second 8800GT which works perfectly fine, and also 8GB (2x4) of OWC RAM. When I boot the system it now says 8GB RAM instead of the 10GB I have installed (8GB from OWC and 2GB default Apple).
I have them installed as:
Riser 1:
2GB | 2GB | 2GB | 2GB
Riser 2:
empty | empty | 1GB | 1GB
The little book that came with the system said if I had 3 pairs to use slots 3&4 which is why I set it up that way. Are there any issues with doing this? Do I have the RAM in the right slots? How can I set this up to see the full 10GB?
I run a UMBP @ home and also have a work laptop connected to my LAN. I want to remote into my work laptop from my UMBP, but I am having trouble doing so. My work laptop has joint to the company domain and has Group Policy applied. However I made sure all the remote desktop firewall rules are open and I still can't remote into it. Work laptop is running Win7. My dad's pc is also a Win7 and I can remote into just fine.
View 2 Replies View RelatedI'm having trouble setting up my printer to run from windows. I have a Macbook Pro, and successfully installed Windows XP sp3.I have an HP photosmart printer connected wirelessly using an Apple Airport Express. I have no problem printing from the Mac partition, but can't set up my wireless mouse or the printer when I switch to Windows.
View 2 Replies View RelatedWhat are the best settings for an Intel motherboard with an Intel Proccesor? (Running OSX LEOPARD!)
View 2 Replies View RelatedI just recently got an iBook G3. I found it in my towns recycling center and brought it home. The user on it does not have admin privileges. Seeing how it's old and is running 10.2 I was just going to install some sort of Linux on it. I went to go boot into a CD and it came up with a grey screen with a password prompt? I don't have the password. Does the same thing if I try to boot into single user mode.
View 2 Replies View RelatedI'm looking for the original apple bios for the ati 2600xt. I own a macpro early 2008 and during the flashing procedure of an ATI 4870 i have made something wrong and suddenly my ati 2600xt is no more recognized as an ati 2600xt but as an ATI 3xxx or something like that. Could you please give me a link where i can find that bios ?
View 2 Replies View RelatedI have been beating my head against a wall for weeks trying to boot into Windows. So after weeks of searching for a solution and many attempts of re-installing both Windows and OSX. I am at the mercy of some of the very MAC wise folks here. So I will try and be as brief as I can.
I have a first gen Mac Pro that has worked great since I bought it in 2006. I have bought a Gforce 8800GT 1st gen upgrade video card. Bought it the first day it shipped, like a lot of other people. I followed the the thread that pushed apple for a upgrade for us early adopters. And am glad that apple listened to their customers and made a compatible ROM for the card.
So now to my problem and why I think it maybe a EFI issue. While waiting and reading about the then rumored video card upgrade, I tried to use a PC version of the 8800 GT, same card with a PC ROM. Well If I would of read more first I would of known that it would not work, and was really just taking a chance and thought that somewhere someone would make this work. Boy was I wrong. So after taking out the card and putting back in my 7300 stock card, I can no longer boot into windows. I get a blue screen stop error 0X000000CA (0X0000002, 0X89A0B0C0, 0X00000000, 0X00000000). Didn't turn up much searching for that error. So the symptom I have is as follows: power on holding down the option key, click on my windows disk partition on a separate NTFS formated HD, the computer try's to boot into windows, but after just a quick flash of Windows XP splash screen then straight to the blue screen. Now fast forward a week. apple releases the upgrade, took the PC cad back, ordered the MAC upgrade hopping this would fix the problem, It didn't. So I do a total re-install. I totaly reinstall OSX on a fresh HD, run all updates for 10.5.2. I put in another fresh drive in and run Boot camp to install a fresh copy of XP. The CD installs the startup files to RAM, then enters the setup partition/format screen. I chose new partition select NTFS full option, the HD formats. Now windows loads the install files to the hard drive and reboots. Now I am back to where I started. OSX works perfect XP will not even install new, much less boot into the old partition that is on another HD that I have pulled out right now, I also went back to the 7300, no change. I can hit F8 and get the advanced menu, if I select safe mode it freezes and goes to blue screen. If I move either of the cards to another slot I get the same result but the Mac Pro reboots in an endless cycle after a quick blue flash. In the 16x slot it just freezes on the blue screen.
So after searching for someone with the same problem it seems I cannot find a solution other then what I have read about EFI and that it is basically emulating a BIOS so windows can boot up on the Intel hardware. So am I even thinking in the right area? Have I some how corrupted the EFI firmware? Any suggestions? I bought the Mac Pro to run Pro Tools in windows along with Windows only apps. I use final cut pro in OSX, but I spend most of my time in Windows using the awesome power of the machine. I like OSX but it is not a total OS solution for me, I really like having a hybrid, and VM's and such in OSX will not work with Pro Tools.
Could someone please post the BIOS/ROM from the new Mac/PC ATI 3870 card?
You can write the BIOS file from within Windows/Bootcamp by using GPU-Z. If you do not want to post it here, please consider adding it to the VGA Bios Database at techPowerUp.
The same way as we install vista on our Mac Pro can I install os x 86 (that come with bios kernel) and then using bios-based VGA card (such as HD4870, 9800 GTX+).
View 24 Replies View RelatedHow do I change my mac's bios language from Chinese to English?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I am trying to install WINDOWS 98 SE on PARALLELS 4.
I'm currently running on a Mac Mini Intel, running OS X 10.6.
Heres a screenshot of the problem im having, it is telling my I cannot boot from the image on the BIOS.
I guess curiosity got the best of me and I attempted to re-flash my working Sapphire 4870 with a different bios image provided here, and now when I boot I dont get any video. Just a black screen and no chime.
After this I tried putting in my old 7200gt to try and get it to boot so I could reflash back to the old firmware - but as long as the 4870 is installed I get no video at all. As soon as I take it out everything works fine.
Please advise me on what to do next.
my macbook is dual boot with windows. now i am reinstalling my windows OS again due to some files/drivers missing. when i ran the cd to copy files. when rebooted for installation it wasn't installed. it say "the bios memory options ie caching or shadowing should disabled for me to continue the setup process.
View 3 Replies View RelatedI store various frequently used items on my desktop. If I have many windows open, I would like to be able to click on my desktop and all the windows/apps, etc be moved out of the way. I assume this is an easy fix, but I can't figure out how to set it up.
View 5 Replies View Relatedhere I was so excited to Setup Bootcamp and this is what I get.I kind of don't understand what I am doing, or what is wrong with my mac in the first place? Does anyone know why this is happening and what can I do in detailed instructions.
View 6 Replies View RelatedI have an intel Mac Mini currently running Snow Leopard. I upgraded the hard drive from a 5400/160G to a 7200/320G. I have heard that Windows 7 can cause a Mac to run hotter, so I would like to know if it will run too hot for this set up?
View 8 Replies View RelatedNM - "Friend" playing a small joke by renaming my computer.
Quote:
Currently connected to my home's secure WiFi (WPA2). I ran Terminal on my MacBook Air and this came up: Last login: Sun Aug 8 21:52:04 on ttys000 Daniel-iPhone-Gateway-Bios-v6:~ rogersda$ Who/what is Daniel-iPhone-Gateway-Bios?
i get this error when i try to install service pack 3 on my boot camp partition
"there is not enough disk space on F: to install service pack 3. setup requires a minimum of 4 megabytes of free space or if you also want to archive the files for uninstallation, setup requires 4 additional megabytes of free space. free additional space on your hard disk and then try again."
I currently own a Macbook I purchased in January 2009. A few days ago I installed Boot Camp Agent so I could use it to play certain games I could not run using Parallels. I downloaded Boot Camp following the directions it comes with. (Installed Windows XP Pro, then installed Mac OSX Leopard 10.5). Everything works fine except I cannot figure out how to use the wireless network established in my home.
On the Mac side, I can connect to the internet with the Airport fine, never have a problem on that side. When switched to the Windows side I have no wireless options. Though I can use the internet when using an ethernet cable connected directly to my router (Linksys WRT110). I have read soo many forum posts and nothing I have read has helped so far. When I go to Network Connections and Properties, I do not have a Wireless Network Connection tab.
I've just installed XP on my Macbook Pro (No BootCamp, just Windows XP), and I'm currently trying to figure out how to set up my network connection. I'm assuming that I will need to install drivers?
View 2 Replies View RelatedWhen i run my Boot Camp (first time) it says "Boot Camp Assistant Beta has expired??
what to do? do i need to download another boot camp?
