I've installed win 7 twice now, and I'm finding that when I first get it going everything works as I would expect it to. However when I load back into it my direct x 9 drivers don't seem to work. I'm not sure how to fix this. By the way have tried downloading drivers again but it doesn't work.
View 4 RepliesSo i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
View 1 Replies View RelatedApple recently replaced my macpro with a newer one and they royally messed up my windows partition so I had to start over. I reinstalled WinXPpro and installed the drivers from the Leopard disc. I have about 20 unknown devices in my hardware panel. Most importantly my wireless and two ethernet jacks aren't working in XP. I tried manually installing drivers for my wireless card, but couldn't find the exact driver (I have the Broadcom BCM43xx 1.0 (5.10.38.35)). I also tried running the latest bootcamp 2.1 install as well and that didn't work. If anyone knows where I can get the exact drivers for my wireless card I think I can just connect to windows update and it can handle the rest. I should also mention I've hardwired my computer to the network as well and windows doesn't recognize that either.
View 1 Replies View RelatedI know the Boot Camp drivers that are shipping with the latest Mac Pro includes 64-bit drivers for Vista, but I was wondering if anyone has tried to see if they work on XP x64? That's the 64-bit Windows version I have on hand and it would be nice to get it to work. I don't suppose the drivers that shipped with the MacBook Air are any newer?
You would think that Apple would jump to support XP x64 given the commercials about people switching back from Vista to XP.
All the drivers don't work, this is when I try to install via the BootCamp Windows Installer.
However if I manually install all the drivers it doesn't work?
PS. I am a complete newbie at MAC.
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
So i am trying to change my apple boot camp drivers to nvidia's, but i think i must have downloaded the wrong ones, or done something wrong. I tried to install Geforce/Ion driver release 192.62, (from nvidia's site, i selected gefore 8 series) and when i ran the setup it said: 'nvidia setup program could not locate any drivers that are compatible with your hardware' . My questions are:
� Which drivers should i download? a link would be great.
� Are there any pre-requisites i must do, such as install version 170 first?
I am using an iMac 24" with 4gb ram, 500gb 5400 rpm HDD, and 8800 GS 512mb.
The reason I am trying this, is because when i play some online games, i often get bad lag spikes, but that chat is still running. Someone recommended me to 'update my drivers'.
I have an ethernet cable. i have an alu macbook. i have an iMac. i need to transfer files between the two. tried connecting the ethernet cables. on the macbook it says "ethernet cable not plugged in"
on the iMac it says "ethernet cable not plugged in".
i know the ethernet cable works because i brought my macbook up to my router and used the ethernet cable to connect to the internet. it is Cat5 or whatever. i've tried everything static IP addresses. restarting. replugging. over and over and over. no luck. the macs just pretend there is no ethernet cable plugged in. tried DHCP. tried manually. but it works when i connect my macbook to my modem.
i've tried everything. i've googled, i've mroogled. nothing works. i spend two hours trying to work this out myself before coming here. every single webpage online just says "oh just turn on file sharing LOL then it works" not for me it doesn't. i've tried that. i've tried it over and over and over again. it doesn't work for me. still won't recognize.
i'd use wireless connection to transfer but that'd take like 20+ hours to send 60GB+ of data. too long (iMac is not at my house) are ethernet cables just fail? this is a BRAND NEW 20 inch imac and a aluminum macbook from 2008.
I have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
I can't find the answers I know its been asked before.
Its the 2010 MBP 13"
I have Windows 7 Professional 64bit running through parallels 5 and it seems to be missing alot of drivers (wireless most importantly, but also audio etc). Where can I get these, is it the same as bootcamp drivers( are they on one of the disks that come with macs?).
I've installed a legit copy of Windows XP, SP2. Nothing works, not my webcam, not my internet, not even the full resolution. The first time around that I did this, I had the DVD that came with my iMac, I installed the Windows drivers stuff off of it, and everything worked perfectly.
Can anyone point me in the direction of either a replacement for that DVD (.iso image or something?) or simply the required drivers that will let my iMac 8,1 connect to the web?
Im running windows xp through vmware fusion... and i need to enable direct 3d acceleration
View 1 Replies View RelatedI'm trying to download the installer file for Safari 4 -- I need both the Windows XP and Vista versions. However, I'm on my Mac right now and Apple.com won't allow me to download Windows versions, just the Mac version. Anyone have direct links to the downloads? (Or can point me in the right direction to finding them?
View 1 Replies View RelatedI was running Bootcamp with Windows Vista smoothly until I decided to install Parallels 4.0 on my Mac 10.5.8. After installing Parallels, it loaded my Bootcamp installation which sort of freaked me out and so I closed Parallels without doing too much. When I booted Vista today, I tried running games that requried Direct X or enhanced graphics and they are not working! These games used to work fine before I had installed Parallels! I even tried fixing the Bootcamp installation by repairing the drivers through the installation cd that came with Leopard, but I still get the same problem!
View 3 Replies View RelatedSince going with the Mac Pro about two years ago, I've enjoyed lots of PC games. I've installed a larger Nvidia graphics card and have enjoyed its improved performance over the stock card. I also have a copy of Windows Vista 64 bit sitting on my shelf. However I ask myself?why? Why do gamers even need Vista or Windows 7 for that matter? Most games are still written for Direct X 9.0c and Windows XP. I'm sure that will change over time, but very few games are coded for Direct X 10 with the advent of Vista.
View 11 Replies View RelatedI boot camped my Macbook Unibody 13" (bought early 2009) with windows 7. However the bootcamp version was 2.0. I now cannot get drivers from the 3.0 bootcamp update.
View 2 Replies View RelatedOk, Here is the scoop. I am trying to get Wifi to work on my macbook while on XP. When I put in the disk and it says "The package requires a newer version of Windows Installer. Would you like to update?" I say yes and it says "The requires resoruce update is missing." and if I click no it says "The operation is aborted." or something.
View 10 Replies View Related1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple
2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
I have just installed Windows 7 via bootcamp and everything went smoothly, the only problem is that i have lost my DVD of snow leopard and want to install the 3.2 drivers on windows 7, however it is to my understanding that i need to install 3.0 from the DVD first. Is there any way around this without ordering another copy of snow leopard? ?25 might not seem a lot but on a student budget i would rather not shell out.
View 1 Replies View RelatedI recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies View RelatedHaving problems with the Audio, Brightness and eject button keys after windows xp automatic update. Buttons sometimes work after a shutdown and restart, sometimes not. Tried the Bootcamp 2.1 reinstall but didnt help much. Where the heck can i get drivers for the bloody thing?
Apologies for the lingo but im quite frustrated. it takes apple yrs to fix one problem but only for another to appear.
I already gave up on Realtek doing something about their crappy sound quality (despite releasing a new driver every two weeks) and the mighty mouse freezing after hibernation unless u press the left button like a man possesed!!
Apologies if there are other specific threads like this, I did do an MRoogle search but couldn't find one.I've just got a new 15" 2.66ghz i7 MacBook Pro, and have Windows 7 64 bit ready to install. My question is, once I have it installed, with all the Snow Leopard drivers and 3.1 update, should I continue to download drivers from the manufacturers's websites, or just stick to the ones that Apple hands out in their updates?I suppose I'm specifically asking about the NVIDIA drivers. Should I install the most recent drivers for the 330m, or again just stick to the Apple ones?
View 3 Replies View RelatedI'm not convinced that the drivers that Apple provides, even if they come from the hardware manufacturers, are as good as they could be. The reason why I say this is that, prior to installing Snow Leopard and Boot Camp 3.0, I had been playing Dawn of War 2 on an ageing MacBook Pro with an ATI X1600 chipset under Windows 7. What I found odd was that after I had reinstalled Windows 7 and used the Snow Leopard DVD to install the Boot Camp 3.0 drivers was that Dawn Of War started to complain that my display drivers were incompatible with the game. Figuring that I hadn't had this problem before I uninstalled the display drivers Apple provided (from ATI) via the Device Manager, restarted Windows and let Windows Update find drivers instead (again, from ATI). This seems to have sorted out the problem.
If you are having problems with drivers then perhaps letting Windows Update try to find them may be the answer as this seems to have worked in my case.
I'm trying to install the 168.81 ForceWare drivers for my 9600M GT (256MB) in Windows 7 x64. The drivers from Boot Camp on the Snow Leopard DVD installed fine. I want 168.81 because I always like to have the latest drivers for everything.
Anyway, when installing it, it says something about not having the required hardware and it won't install.
Is the Boot Camp drivers the only way of having the latest drivers.
I recently got a windows 7 home premium, my macbook pro is a 2.4 ghz core 2 duo, 256 mb 8600m gt, 4 gb ddr2 667 mhz ram, 15.4, but I cant find drivers for it anywhere, Im running snow leopard 10.6.2 and boot camp 3.00.1(software update wont get it to 3.1) I install windows then I try to find drivers but I cant, the guy who sold it to me didnt give me the snow leopard cd now I need to find drivers for it
View 1 Replies View Relatedif i wanted to get a blu-ray reader/ burner for my mac pro i will need drivers for it. Makes sense. Here is the issue all the blu-ray drives i see that are supposedly for mac do not seem to come with drivers.
I have also seen people say all you need is a software such as toast titanium for Blu-Ray.
I want to put blu-ray movies on my mac and convert them to HD so i can stream them. so i need a blu-rayu drive.
My mp 830 works just fine - but the scanner doesn't work - the machine looks fine - probably a software or driver problem?
Info:
MacBook Pro, Mac OS X (10.7.3)
So I got windows 7 installed on my 2010 mbp but when I went to install my windows drivers via my Mac osx disc I realixed I couldnbt find it.
Is there anyway to install all the drivers/apple software without my OSX disc? If not, how do I go about getting a replacement disc from apple?
We'll after a mamouth effort today which had me thinking that I'd bricked my Mac, I've finally got Windows 7 installing throught using refit, bootcamp didn't want to work with my external dvd drive.
Where do I get the native bootcamp drivers to ensure my mac works properly in Windows mode? Are they on the Snow Leopard disk ? I recall in the past in the past that bootcamp used to make the drivers for you and burn them onto a CD but wasn't able to get past the partition stage, so don't know what the process is?
The graphics driver is the most important, I'm using one of the intel core duo original imacs, so I think its ATI.
Also any ideas where I can obtain a osx tool for managing partitions, I was showing about 5 partitions on the windows install, so would like to clean things up a little?
Ive been loving this Macbook Pro 2.66ghz so I decided to get back into gaming. I installed my Windows 7 beta(Build 7000) and then installed Crysis. Now, when windows 7 got done installing it did "windows" updates and installed a Nvidia driver update. My question is this, are their any other drivers that I need for graphics or gaming? Also, what general settings are used for crysis on this model? And last is their any way I can get sound working correctly? It wont work for some reason and I have lost my button controls.
