I just purchased a Samsung CLP 315 laser printer to run over my network and cannot get it to work for the life of me. I have it plugged into my AirPort Express and it recognizes it through Bonjour but when I go to print it gets about 4% complete and then says 'unable to locate'...
View 7 Replieshere is my set up:
macbook pro/imac
apple wireless router
ps3
samsung bdp 3600
all connect to the internet wirelessly accept the samsung. it came with a wireless dongle, it can see my network but will not connect when i type in password it does not connect.
I have a MacBook Pro 5,2 with OS X 10.6.8. I also have a Samsung Galaxy S2. I want to hook it up to the Mac to use as a USB tethered network device so I can use it on the train and wherever wifi fails to work. I can get the phone set up right, but the Mac doesn't see it as a network device. There is a Windows network driver for the phone but not a Mac driver that I can find. I CAN use portable WIFI hotspot, but with 2 radios running my battery life is terrible and I get some serious network lag.
Info:
MacBook Pro, Mac OS X (10.6.4)
I was able to print out a Network Configuration Report which indicates an IP Address, MAC Address, Subnet Mask, etc. It even says that the thing is connected to a network called "airportthru" but I have no idea what that is either... I'm an absolute networking zero for the record.
I can't access the SyncThru Web Service (as noted in the instructions) because when I put the IP address into my browser - both Safari and Firefox - I get an error (can't open the page because the server can't be found).
I'm a bit new to the whole Mac scene. I'm trying to figure out how to set up a network for my office, and I have a few questions.
1. Can I have my modem plug into a Time Capsule and use that as a router, or do I need an airport? This relates to question 2.
2. I want to have a server to store all of my data. 1TB will be plenty. Do I need to buy an XServe, or can I just buy a 1TB Time Capsule?
Basically, I want to know if I can use a Time Capsule as both a router and a server. I will have 6 computers in my office using this wireless internet. Would I be better off buying an Airport Extreme and an Xserve? What does an Xserve offer that a Time Capsule does not?
So I got a new Macbook about 3 months, and I've been sitting on a couch in the same room with the wireless router. However I'm getting a bit sick of having to use a couch as my desk and I want to get internet in my room.
Our house, is reasonbly new, and I know that all the phone wires are cat5 (I'm 100% sure), so I was thinking of setting up a wired network.
Since our house is made up of concrete and steel beams, the wireless signal isn't that great in our house. We have a D-Link G604T which is a piece of junk so I will get a new router in the near future.
So currently, we have some sort of filter in the room where the router is, so we can plug in the router without having to worry about putting filters on all of our telephone lines.
However, if I were to put internet in through the same line, I'm guessing I would have to get some filters.
Hopefully what I want to do is get a phone jack to Ethernet converter and put internet directly into the wall and hopefully I will get internet in all of the phone jacks. I could probably take the cable out and put a Ethernet end straight on the cable.
I was also thinking If I get a airport extreme of some other gigabit router, I would technically get less latency and would retain my internet speeds even though I would getting internet through a long line of cables.
I have installed and have running a new Time Capsule. I would like to access files through the wireless network between two Apples and two PC's. At present the Apples are working wonderfully, however the PC running Windows 7 sees the network is unable to access it.
View 1 Replies View RelatedSo explain to me as you would to a complete moron how to create a wireless network with WEP encryption. I have an iMac running Leopard and my router is a D-Link DI-524.
View 3 Replies View RelatedI have three macbooks, one of them is a MacBook pro. I can connect by using a computer to computer network no problem but problems arise when I want to connect them through my home network. I have set up file sharing on all of the laptops. I have tried using Go => Connect to server, then afp://ip address, nothing. When I click on network in finder, nothing turns up. Do I need to open up ports on my router? What is stopping the macs seeing each other?
View 5 Replies View RelatedIs this possible? I use my wireless connection at home and at school. In home I use google dns however in school I cannot use any dns it is not allowed. For this reason I add and delete dns adresses everytime. It is quite boring. Is there a way or application that allow me set different dns adressses for different network connections?
View 3 Replies View RelatedCan I use a router and an external HDD that connects via USB as a Time Capsule for wireless Time Machine backups? Or does it HAVE to be a Time Capsule to work? I am planning on buying a router (see link below) and I already have a huge 1.5 terabyte WD hard drive, and I'd really like to just connect it to the router and use it for wireless back up...and possibly even move my massive iTunes library over to as well one day.
Here's the router I'm looking at: [URL]
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.3)
Can someone point me in the right direction to set up a network printer on my recently purchased AEBS? Love the unit so far except can't get me Epson printer to work yet.
View 2 Replies View RelatedI've come home from college for the summer and set up my PC and iMac in my bedroom. However, the wireless signal from the router in the basement (a cisco m10 wireless n router) is very weak and cuts out frequently. I have an Airport Express and was hoping to use it as a wireless repeater/range extender, but can't seem to figure it out. I know there is no "official support" for use as a repeater with non-Apple routers, but is there a way around this? If so, how can I set up my network?
View 1 Replies View RelatedI have a Mac Pro which I just upgraded from Leopard to Snow Leopard. I have an HP Multi-Function 2840 hooked up to the router via ethernet. This printer previously worked through Leopard.
Now, my understanding is that for SL, the drivers for this printer are in the operating system and can not be downloaded from HP.
How do I set this up as a network printer? I would like to be able to print from my other computers in the house as well.
Please Note: Snow Leopard only provides drivers for the printing function of this machine. I am going to have to revert to other means to use this device to scan.
I am attempting to create an ad hoc network for the purpose of wireless printing, but I am clueless how to do so, or if it is even a possibility. I am a student and I do not want to connect my printer to the school's wireless network, nor do I want to connect via the USB interface. These are the peripherals:
Macbook Pro 13", 10.6.4
Brother HL 2170w
Can anyone explain to me how I might go about setting up a network on my Macbook Pro that my printer would be able to connect with?
I have set up a static ip in Network and then I followed [URL]'s guide to setting up a port forward for my router.
Transmission keeps telling me the port is closed, and when I check on random port sites, they also tell me it is closed!
I just purchased my new Airport Extreme (draft-n) and setup was relatively easy when building a simple network. However, after discovering that the Extreme cannot cover the whole house, I've been wanting to use my old Asus WL-530g router as a base and the Extreme to extend the network, or vice versa.
I've tried using the Extreme as the extender to the Asus's network but it gives me this message: "You cannot extend this network"
What can be the problem?
Are there any alternative ways to extend a network?
Can I use the Asus itself to extend the Airport network?
I am setting up a Dell 1355cn printer that has a scan to network feature. I have enabled SMB networking in my system preferences. Now I need to know how to get the scanner to scan to a shared folder on my Mac. These are the settings I have tried but so far I am getting an error on the printer.
D01 Namee.g. PeterShare, Sharedfolder Server TypeSMBFTP (ftp://Server Address/Server Path)SMB (\Server AddressShare NameServer Path)Server Addresse.g. myPC, XXX.XXX.XXX.XXX
Share Name
e.g. SMB (Share, Sharedfolder)Server Pathe.g. FTP (pub, pub/share), SMB (finance, financePeter, financePeterSales)Server Port Number(139, 5000 - 65535) Login Namee.g. FTP (anonymous, Peter), SMB (Peter, DomainPeter)Login PasswordRe-enter Password
Info:
MacBook Pro, Mac OS X (10.6.7)
i have two iMacs, one 2009 and another 2014 and a network printer, these are in a home office and the iMacs connect individually to my by home hub. My network/usb printer is connected to one of the iMacs. whats the best way to setup a network to connect the two iMacs and allow AirPrint from iPhone/iPads without having to run a network cable to my home hub.
View 2 Replies View RelatedI'm trying to make my laptop as mobile as possible and I'm wondering what I need to buy to accomplish this.
I would like to be able to access my external hard drive [s] wirelessly. I currently have three external drives, and I would also like to print wirelessly [which may be a problem because I have the Epson 595 ].
What would you recommend I purchase to make this work? Do I need a second laptop to run as a 'server' or can I just get something like the AEBS or can I use my existing Linksys router somehow?
I'm moving into a house with 4 friends and we need to setup a home network which I am in charge of. 2 people have Macs and 3 have Windows. I want a central hard drive that everyone can throw their music and videos on to share. We also want wireless N. I was wondering if a Time capsule would be a good way and a good value or what the best way to set this up would be.
View 13 Replies View RelatedI have 3 macbookpros connected to a mini mac server via ethernet. I have the cables and hub to set up a firewire network. I'm wondering if having two networks will increase my connection speed?
Info:
MacBook
Pro, Mac OS X (10.7.3), Server
I have a macbook air, I'm trying to use my airport extreme with a 1 tb hard drive plugged in over my network to store my iTunes etc i change the preferences but it always seems to forget it when the laptop is turned of..
Info:
MacBook Air, Mac OS X (10.7.3), using 3rd gen airport extreme
I need help setting up network printing. I have a new router N600. I can not see the printer.
Info:
MacBook, Mac OS X (10.6.8)
Basically what I wanna know is: Can I configure time machine to back up to a hard disk that is connected to my router? I guess essentially I'm trying to make a homemade time capsule. Is this possible and if so, how?
View 2 Replies View RelatedI've just ordered a Mac for work, which I'll be adding to a PC-based network all running under Windows Small Business Server. I know I can add the Mac ok, but I just wondered what will happen when I then add Parallels. If the Mac is properly set up and attached to a domain, will the "Virtual Windows" machine by definition be part of the same network and work ok, or is it better to think of the virtual machine as a completely new entity in the network?
Perhaps it'll all become blindingly obvious when I start, but I just wondered if there was anything I need to know so I go into this with my admittedly non-techie eyes open!
I've an Internet key (settings requested: phone number/web address/primary DNS): I put only the first 2 because with the third one (needed to speed up the connection) it doesn't works. I put the primary DNS requested on MACUSBmodem (DNS page, on the left).
View 4 Replies View RelatedMy neighbor has an IMac with OS 10.4.11 installed. When I open System Preferences and select the Network icon, the Network window comes up but it is overlayed with a message that states: "Your network settings have been changed by another application." When I click OK, this same overlaid window comes back.
The only way I can get out of System Preferences at this point is to do a Force Quit. In other words, because this overlaid window appears, I am unable to access the Network window to look at TCP/IP settings, make changes, etc.
Next I went into System/Library/Preference Panes/Network.prefPane(more info) to look at the application that appeared in the "Open with" field. It stated "System Preference." I replaced this with a new "System Preferences from the Applications Folder, but the same thing happened - even after I rebooted the computer.
Please let me know how to solve this problem so I can access the Network System Preferences properly.
Thank you.
I have a home network running 3 PC's(with XP) and 2 Macs (with Tiger OS X 10.4.8). Mysteriously one of my Macs(MacMini) refuses to show a Network icon in the Finder sidebar? I have used the Go > Network menu to try to get a Network icon, but this does work. Yesterday I did a scheduled Mac OS system update, and it seems that since then I have not been able to see/get a Network icon in my Finder.
Has anyone else experienced this problem? PS - I am able to use the old 'GO > Connect to Computer' method, then type in the smb://myOfficePc, and access shared files on other PCs on the network. So networking is configured properly on this MacMini.
I have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
