OS X :: Unable To Access Network Window / Network Settings Changed By Another Application
Dec 11, 2009
My neighbor has an IMac with OS 10.4.11 installed. When I open System Preferences and select the Network icon, the Network window comes up but it is overlayed with a message that states: "Your network settings have been changed by another application." When I click OK, this same overlaid window comes back.
The only way I can get out of System Preferences at this point is to do a Force Quit. In other words, because this overlaid window appears, I am unable to access the Network window to look at TCP/IP settings, make changes, etc.
Next I went into System/Library/Preference Panes/Network.prefPane(more info) to look at the application that appeared in the "Open with" field. It stated "System Preference." I replaced this with a new "System Preferences from the Applications Folder, but the same thing happened - even after I rebooted the computer.
Please let me know how to solve this problem so I can access the Network System Preferences properly.
Thank you.
View 7 Replies
ADVERTISEMENT
Apr 4, 2009
when I open my Network in System Preferences, "Network settings have been changed by another application" pops up and every time I click Ok, it pops up again, not letting me be able to access any other option in the Network window. The wireless icon has disappeared from my top bar and the only way I have managed to get online is via my ethernet cable. I have had nothing but problems since I started using my O2 Wireless Broadband dongle and I've noticed that behind the "Network settings have been changed by another application" notification, I can seen the Dongle has appeared as a new network connection option... but was never there before today (have been using the dongle for two months now)
View 4 Replies
View Related
Jan 20, 2009
I'm getting a message every time I open Network in System Preferences saying "Your network settings have been changed by another application". I click OK, and the box goes away and immediately comes back. It means I cannot use the Network part of System Preferences at all, because this message is caught in some kind of loop, and won't go away.
View 5 Replies
View Related
Aug 14, 2009
I am running OS X 10.4.11 on a "pod" iMAC. When I open system preferences and click on network, I get a pop up window that states my network preferences have been changed by another application. When I click on the green "OK" box the pop up goes away and comes right back. This is driving me crazy because when it gets into this cycle it's almost impossible to get out of the preferences panel or even check the settings! It's like it gets into a closed loop and won't let you do anything.
View 1 Replies
View Related
Dec 11, 2009
My isp (Comcast) informed me that I could no longer send emails unless I changed my email port from port 25 to port 587. When I open my network preferences to make the change I get a message that my network preferences have been changed by another application. When I cancel the message it reappears and will not allow me to do anything even quit network preferences.
View 3 Replies
View Related
Mar 15, 2010
I am connected to the internet via a belkin N+ router..... this is in turn connected to an adsl modem...I am having no problems with the signal to the router but at least four times a day my internet disappears....
When I run Network Diagnostics hey presto, your internet is working fine....The only things I have changed recently was that as I am running osx 10.4.11 I was having that issue where you couldn't access Network in sys pref, it kept saying "your settings have been changed by another application", I found a solution on here whereby you delete the plist prefs and rebuild them... That worked a charm but now I'm wondering is this connected in some way....
or...
I got software from the makers of the belkin N+ wireless usb dongle chip that came with my router (belkin don't provide osx support but said that I could get a utility from the chip makers) I installed this but it never worked so uninstalled it, and ran disk utility and safe boot and pram and fsck (everything I could think of)
I only have one location in network, and airport is the only active network port
any ideas...????
System:
imac G5 20" | osx 10.4.11 | belkin N+ router | airport extreme card
View 4 Replies
View Related
Apr 3, 2009
My girlfriend changed the user's name and the problems started (iMac wouldn't remeber system settings and denied access to some files and catalogs). When I wanted to fix the problem I probably made a mistake and changed the access settings of some files (finally even hard disk's settings). After this action my iMac doesn't start (the screen is white with the apple logo and nothing happens). Is there anybody who knows what to do now?
Information:
iMac
Mac OS X (10.6.3)
View 10 Replies
View Related
Aug 24, 2009
My Network settings Pref Pane always shows the message "Your network settings have been changed by another application" and I can only get out of this pane by force-quitting the System Prefs. application. Can anybody help me sort this out. Have OSX 10.4.11 on an eMac.
View 3 Replies
View Related
Jan 12, 2011
I have: Power PC G5 dual 2.3 w 10.4.11 os, Lost Internet connection. (ethernet cable direct to router), No known cause. Checked router,cable etc. All work fine w other computers etc. router does not "see/read" when cable connected to G5. I figured Ethernet card is dead. Can't afford new card figured I'd try: Net gear G54 wireless USB adapter, just to get back online. Downloaded driver for Mac etc. Went to System Prefernces to set up. Opened System Preferences then Network, Automatically this message drops down: "Your network settings have been changed by another application" When I click "ok" same message automatically drops back down. Cannot access "Network settings" at all.
View 1 Replies
View Related
Feb 1, 2009
I am running an iMac G5 (just pre Intel) using OS 10.4.11. My internet is via an external modem, ethernet connected. Everything is working fine (as far as I know!) However, for no particular reason I opened "System Preferences" and on clicking on "Network" was confronted with this:- [URL]. On clicking the OK button nothing happens and the only way to get out of System Preferences is to Force Quit it. As I can't get into "networks" in System Preference, I have no idea how the settings have changed. I can't remember when I last installed any new software - it's also ages since I looked at that section of System Preferences.
View 2 Replies
View Related
Sep 20, 2010
I'm trying to prevent my Mac from connecting to any other Network than my own. However, it always grabs the neighbors. How can I specify that I do not want to be on any other one than my own. It does not seem that there is this option in the Network Settings.
View 2 Replies
View Related
Jun 21, 2012
I use only Wi fi network, when i have finished setup it up it will not lock, also the same with sharing.
iMac OS X Lion 10.7.3
Info:iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Feb 2, 2009
I got iMac on my office. There is network issue on my iMac Desktop. When my computer remains idle for long time (sleep) and wakes up again, I can ping into the same network device (say 192.168.0.0 network) but I am not able to ping into other sub net (say 10.2.0.0, printer network).
Restarting iMAc resolves the problem or unplugging the cable and connect to some other Laptops and connect back to iMAc works again (I mean I can access other networks again). I turned of auto-negotiation and tried renew DHCP Address but it still doesn't solve my problem. Restarting the computer and unplugging the cable and plug-in back is not a solution for me.
View 1 Replies
View Related
Dec 17, 2010
I'm visiting my mom and trying to access the internet via one of her neighbors. He's has ok'd this and gave me his password. In the past, this has worked. But now, my daughter can access internet on her mac, but I cannot. I have both mac right here side by side. One has access, one does not.
View 3 Replies
View Related
Sep 1, 2008
i recently bought an Airport Express, and i finally took it out of its box after i purchased my new stereo. I connected the audio cable to the stereo and the airport unit and plugged it into an outlet. I opened up airport utility on my mac, AX appeared and i configured it to "join a wireless network". After completing the remaining steps, i updated it.. and waited for it to restart. Now here's my problem. It comes up with an error telling me it couldn't find the device after restarting. I have Verizon FiOS as my provider.. and I know that airport express has a history of trouble with the Actiontec router. Is there anything i can do with my current equipment to get this thing to work? I do not need to extend the network.. only join to use airtunes and print wirelessly... Also, my Actiontec router and FiOS connection are through my crappy dell pc downstairs, while i am using my 24" iMac upstairs in my bedroom trying to connect this. Should i change my router's settings?
View 10 Replies
View Related
Jun 11, 2012
I have a USB disk attached to my Airport Extreme, and use it as the target of my time machine backups from my mac book pro (connected via WiFi). For the most part things work fine. But if my macbook goes to sleep, after it wakes up it often (not always) gets the next time machine backup to fail with a message saying that it cannot access the disk. At first I found a brutal method of correcting it: I would disconnect from WiFi, go to my AE and power cycle it. After it came back the macbook never had any problem with the disk. A little more exploration indicated that Lion wasn't unmounting the disk properly. The following works (but sometimes requires a few iterations): I'll go to finder, eject the disk, and disconnect from Airport Extreme, and then go to the terminal and do sudo diskutil unmountdisk disk1 (I first do a diskutil list to find out the right disk)Â
and then ask time machine to backup again. Many times I have to repeat this a few more times before it "takes". Has anyone else run into this? It clearly looks like a bug in Lion, since it never happened until I upgraded.Â
PS. I understand that Apple says that they don't support time machine backup to network disks. But they do to a time capsule! It isn't really different.
Info:
Macbook Pro 13, Mac OS X (10.7)
View 1 Replies
View Related
Dec 5, 2006
I have a home network running 3 PC's(with XP) and 2 Macs (with Tiger OS X 10.4.8). Mysteriously one of my Macs(MacMini) refuses to show a Network icon in the Finder sidebar? I have used the Go > Network menu to try to get a Network icon, but this does work. Yesterday I did a scheduled Mac OS system update, and it seems that since then I have not been able to see/get a Network icon in my Finder.
Has anyone else experienced this problem? PS - I am able to use the old 'GO > Connect to Computer' method, then type in the smb://myOfficePc, and access shared files on other PCs on the network. So networking is configured properly on this MacMini.
View 7 Replies
View Related
Dec 31, 2010
I have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
View 2 Replies
View Related
Aug 7, 2010
I've searched everywhere and have one nagging issue. After I uninstalled Parallels I keep getting two Parallels Virtual Network Connections under Network in System Preferences. It happens every time I restart, I have to redeleate them. Has anyone had this problem after uninstalling Parallels?
View 5 Replies
View Related
Aug 6, 2009
iMac OS 10.4 - was working with dial up modem but wanted to plug into my network for high speed internet access - after plugging in RJ45 cable, the network was not accessed but the computer continued to go the dial up route. When attempting to change network preferences a flap keeps appearing saying the preferences have been changed by another application - this flap appears over and over and will not allow preferences to be changed. Dial up still works by clicking on the phone icon at the top of the screen. Any way to reset this without reinstalling the system?
View 1 Replies
View Related
Nov 30, 2008
I finally got around to changing the way my wirless devices are set-up; instead of using time capsule as my wireless device, I went back to using the linksys wi-fi router (which I'd used prior to time capsule, but now set up as WPA2 if it makes a diff?) with the intent of putting time capsule in another room with my 1TB iTunes library hanging off it. All seemed to work well but I initially had a problem with the TV keep dropping the wi-fi connection. Now connected via ethernet to the linksys, no problem. iTunes streamed okay but I couldn't seem to get time machine to make a back-up - just prepared forever (overnight, still no joy).
So I noticed today that I seemed to have lost permissions on both iTime drive and time capsule. I managed to fix the iTunes drive by connecting direct to my macbook and running disk utility then adding myself again via sharing (hip hip for MRoogle), but I cannot do the same with the time capsule. Even with airport utility and connected via ethernet I can't even get the configuration up - just spins out until it throws an error. Anyone have any ideas as to what I'm doing wrong - I'm assuming it's me as this all worked in the previous set-up...
View 5 Replies
View Related
Apr 2, 2012
I'm looking for a solution to my WiFi internet connection. I haven't used my MacBook Pro laptop in the last week or so - which means there is no way I have done any changes to the network configuration. However when I now try to connect to the internet via a Hub - which is previously set up on the macbook and worked no problem - is now not working at all.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
View 5 Replies
View Related
Mar 23, 2012
I connect with my MacBook Pro via ethernet to the internet. So far, I've never had a problem until a couple of days, I keep on loosing the internet connect. When clicking through diagnostics, ISP, Internet and Server show first organge then turn red. If clicking through the diagnostics, sometimes I am lucky and it shows a message saying "Network configurations have chnaged", when I click ok, I'm online again. But very often nothing helps and I have to re-start the router again.
Info:
Mac Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Sep 7, 2009
I'm using the Assistant to try to add a USB modem to my network settings. However, the option for "I use a telephone modem to dial my ISP" can't be selected. (please see attached screen grab). I've tried this under Tiger (10.4), Leopard (10.5) and, Snow Leopard (10.6). No luck in any of the last three Mac OS's.
View 1 Replies
View Related
Dec 7, 2009
I have a 21.5 imac that I have setup on a wireless router. I am using the imac and two MBP's. I want to be able to print from windows xp on the MBPs but I do not know how to set it up. I can print from OSX on the MBPs but not windows.
View 2 Replies
View Related
Dec 29, 2008
Is there anyway to have System Preferences create network "profiles" that save more than just the name of the network and the password, but also the "advanced" settings specified by the user. At home, the IP address, subnet mask, etc. need to be entered manually, but everywhere else, I need to use DHCP to connect to networks, which clears my settings. It is getting very annoying having to re-enter these settings every day.
View 1 Replies
View Related
Sep 14, 2009
Today the IT department at my university set up my Early 2008 MBP to work with the library WiFi. While doing this they completely messed up my airport settings so now I cannot connect to my home network. Is there anyway I can reset the network settings to default like they way they were before? I am running Snow Leopard.
View 4 Replies
View Related
Aug 20, 2010
I am having trouble finding a way to make Safari use a SOCKS proxy without going into Network Settings (permission disabled). I am able to use the Terminal to connect via SSH to my server, but I can't get Safari to use the tunnel instead of the normal connection. Is there a way to do this via Terminal without root access? I would also use Firefox's internal network settings but the ability to mount DMGs is turned off to users by the network admin so I can't even install a portable version of it. Dragging to the Applications folder is also disabled. If there is a way to change Safari's settings via Terminal or a way to run Firefox without installing it, I would be very glad to know.
View 6 Replies
View Related
Mar 20, 2009
What are the steps needed to set the OS X Network Settings to the way they were when the computer was new? I want all the locations and settings I currently have removed and I want it the way it was. I am using OS X 10.5.6 Leopard.
View 7 Replies
View Related
Mar 13, 2012
I have recently switched my internet service to Knology. I have an iMac (running OS 10.6.8), it has a 2 GHz Intel Core 2 Duo processor and 4 GB of SDRAM. Both I and my wife have noticed that at times (more than it should be happening) when we try to load a webpage, it freezes and will not load or takes a long time to load. I am using Safari 5.1.2. Our modem is a Arris - 76DA cable modem wireless router combo. Is there a setting in the System Preferences or in the modem that needs to be reset? It seems to work without a problem on my wife's Dell laptop.Â
View 1 Replies
View Related
