Software :: Unable To Connect To Network - Network Icon Missing In Finder
Dec 5, 2006
I have a home network running 3 PC's(with XP) and 2 Macs (with Tiger OS X 10.4.8). Mysteriously one of my Macs(MacMini) refuses to show a Network icon in the Finder sidebar? I have used the Go > Network menu to try to get a Network icon, but this does work. Yesterday I did a scheduled Mac OS system update, and it seems that since then I have not been able to see/get a Network icon in my Finder.
Has anyone else experienced this problem? PS - I am able to use the old 'GO > Connect to Computer' method, then type in the smb://myOfficePc, and access shared files on other PCs on the network. So networking is configured properly on this MacMini.
(I think) but here we have a NAS (Network Access Storage) that everyone can access. Anyways, on a PC you go to network under my computer (or just computer or 7 now) and in there it is listed along with the other computers on the network. That's all good. On the Mac side you can see it as well, and that's all good. Here is what I am trying to figure out; on a pc in the computer navigation bar you can type addresses. For example the drive was not popping up earlier under the "network", so I just type "//DriveName" into the bar and it opened it up as if I had clicked it.
I have a iMac G4 I'm trying to restore so I can browse the web and do simple word processing with. It currently has OS X 10.4.11 on it. It won't connect to a WPA network, but it will connect to a WEP network. Is this an issue with the Airport card or with Tiger. Should I upgrade to OS X 10.5?
I have the MacBook 2.2 GHz with an Airport Extreme wireless card. When I try to connect to my WEP network, for some reason it just does not work. I have tried on multiple networks. I know that it is an issue with my computer because when I use a Windows computer or my Ipod Touch I have no issues.
I took it out of the plugged it in. Turned it on. The airport refuses to connect to my wireless network. The exact same network my G5 connects to fine!
I am trying to connect my new iMac (Leopard OS) to a PC running Windows XP Home Edition using the wireless router. I have the PC connected to the internet via modem/router (supplied by Aliant, the SpeedStream 6520). I have been able to "get on" the internet with iMac using the wireless router. However, I can't get the PC and iMac to connect together over the wireless router inorder to share files etc. On the PC side:
1) I disabled the Windows firewall 2) have set up and named a sharing folder 3) have set up a "work group" name 4) believe I have the correct user name and password 5) not sure about the "network" name, (?SSID) information. 6) have a # with several periods in it that I don't know if this is the computer ID, IP address, or one of the above items, or if they are all one and the same.
On the iMac side: 1) have the IP address of the iMac 2) I have tried "connect to server" but am unable 3) I have never been able to see a "shared" section on the left side of the finder screen.
I have read the thread by "edesignuk". However I did not "put your mac in the same workgroup as your windows PC" as I couldn't find the correct screens on the iMac, and also in phone discussion with Apple help they said they had never done that and advised against it!
My neighbor has an IMac with OS 10.4.11 installed. When I open System Preferences and select the Network icon, the Network window comes up but it is overlayed with a message that states: "Your network settings have been changed by another application." When I click OK, this same overlaid window comes back.
The only way I can get out of System Preferences at this point is to do a Force Quit. In other words, because this overlaid window appears, I am unable to access the Network window to look at TCP/IP settings, make changes, etc.
Next I went into System/Library/Preference Panes/Network.prefPane(more info) to look at the application that appeared in the "Open with" field. It stated "System Preference." I replaced this with a new "System Preferences from the Applications Folder, but the same thing happened - even after I rebooted the computer.
Please let me know how to solve this problem so I can access the Network System Preferences properly.
I have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
I've searched everywhere and have one nagging issue. After I uninstalled Parallels I keep getting two Parallels Virtual Network Connections under Network in System Preferences. It happens every time I restart, I have to redeleate them. Has anyone had this problem after uninstalling Parallels?
My friend bought a new netgear router today. He plugged it in and was ready to get on the internet. The problem is, he can't get on the internet. He is able to connect to the router though. We also tried unplugging the router from the modem and plugging the ethernet straight into his Macbook Pro. From there the internet works perfectly. It is like the modem and the router are not connecting.
I have installed Win XP on my Parallels 5.0.9310 (Mac OS 10.6.2) but am not able to get Windows to connect to Internet. I have tried updated the Devices settings in Parallels as per the instructions in their manual.
Anyone else had this problem? Any suggestions on how to get this to work??
I have the new 15 MBP and just installed windows vista 32bit on bootcamp 3.0. I cant get connect with my internet wireless or ethernet. It states that I need a network adapter NIC. Where can I go to download it? also the sound problem as well, no sound in windows. What steps to take???
Airport sucks. A lot. It works just fine in WEP or unprotected networks, but WPA-PSK it doesn't do a damn thing. It shows it as connected with a full signal, but Safari, iChat, etc... won't connect to the internet. For some reason Azureus works, but it's going at an amazing 146 bytes/sec and then back down to 0. What's going on here guys? This is my first Mac and I am sorely disappointed in Airport.
I have five Macs in the house, all of which can see each other on the local wireless network...but...for some weird reason, none but when they try to connect, I get �Connection Failed� after several minutes of silence.
When I click �Connect As...� in hopes of getting a login screen, nothing happens at all. Nada. Zilch. Zip.
The sharing settings on the MacBook are identical to the ones on the other five. Of course, the MacBook can connect the other direction to everyone, including my brand spankin� new MBP.
Any clues, oh wise ones? I�m stumped. What is it about getting into a simple MacBook that has two G4s and two MBPs scratching their heads?
I use Citrix Web to access my office network. It was working fine on my iMac for several after I installed Snow Leopard. But today, I'm getting an odd error message. I log in, and then a box pops up that says I need to make sure that the remote server is listening on Port 1494. I am not able to connect to my office network. Has Snow Leopard changed anything so that another program is using that port? I have not upgraded my Macbook yet and I was able to connect, so I don't think my office network is the problem. I have tried Safari in both 32 bit and 64 bit, and I've tried more than one Citrix client. So there must be setting on my computer I need to change - if I could only determine what it is.
We have a PC in the upstairs office with cable/DSL router for Internet (through Comcast). This service also has a wireless connection. We have a Macbook laptop which connects effortlessly to our home network and we use it all over the house. We simply clicked the internet symbol on the top right (looks like a little amphitheater), selected out network, entered the password and have been connected ever since.
Today we brought home a new iMac and set it up in basement office. Tried the same routine. Clicked on the internet symbol, selected our network, noticed that the signal is just as strong as it is upstairs, typed in password but that's as far as we get.
I've gone the rounds with the Assist and the Utility features. I've shut the Airport on and off. I've tried setting up a new network. I do notice that the iMac has a "self-assigned" ISP "and cannot connect to the Internet." Does this mean I can't ever connect? Do we need to replace the self-assigned ISP with our Comcast IP address?
I've read here and there that our router might have Macs blocked and we could add this iMac as a secure system to get on the network. But we haven't played with the router's settings because we wouldn't know how. Besides, the Macbook connects fine.
ibook OS 10.2.8 cannot find server no matter where I try not on AOL or MSN or Yahoo or Amazon or news, not anything.In the Network it says server 0 kilobytes. I have tried everything. I can get on an airport network and still no server. My Safari won't work, my explorer won't work, they all say "Cannot find server"
I installed parallels in my macbook and I have the game Red Alert 3 installed in windows in the parallels. I can see that i'm connected to the network in windows and the mac and i can access the internet in both. We have 3 computers in the network, two are PC's and one is the macbook. When the PC creates a game in the same network, the other PC can see the game and join it. But the mac, which is connected to the same network, can't see the game and cannot join. How can I fix this network problem?
Over the last few days I've noticed a problem with missing icons. It seems to mainly effect icons in the Trash but I have one or two missing icons for videos and apps within the Finder and on the Desktop. The icon is completely gone - I have to click on the filename to select it. Quicklook works OK (for video).
I can't think of anything I've installed that would have done it except Onyx, but I haven't run that in weeks. I did repair permissions a few days ago but I doubt that could break this. It persists after a reboot. I can't get it to happen on command, it just randomly occurs. Creating a New Folder always works OK.
i recently bought an Airport Express, and i finally took it out of its box after i purchased my new stereo. I connected the audio cable to the stereo and the airport unit and plugged it into an outlet. I opened up airport utility on my mac, AX appeared and i configured it to "join a wireless network". After completing the remaining steps, i updated it.. and waited for it to restart. Now here's my problem. It comes up with an error telling me it couldn't find the device after restarting. I have Verizon FiOS as my provider.. and I know that airport express has a history of trouble with the Actiontec router. Is there anything i can do with my current equipment to get this thing to work? I do not need to extend the network.. only join to use airtunes and print wirelessly... Also, my Actiontec router and FiOS connection are through my crappy dell pc downstairs, while i am using my 24" iMac upstairs in my bedroom trying to connect this. Should i change my router's settings?
Today I tried to change the finder icon in the dock. Because I'm cheap, I dont have candybar, so I tried to use liteicon. While this changed the finder icon in messages like "do you want to empty trash," it did not change it on the dock, even after logging out and relaunching the dock.
So I went into a bunch of core services and replaced all the finder .icns and .pngs with the one I wanted to use.When I relaunched the dock, the finder was invisible, but it still had the little blue "open" dot below where it was.I downloaded the candybar trial to try to fix it, but even candybar didn't get the icon back.
I'm using 10.5.8. Where are all the places the finder icon should be to show up?
I am running OS X 10.4.11 on a "pod" iMAC. When I open system preferences and click on network, I get a pop up window that states my network preferences have been changed by another application. When I click on the green "OK" box the pop up goes away and comes right back. This is driving me crazy because when it gets into this cycle it's almost impossible to get out of the preferences panel or even check the settings! It's like it gets into a closed loop and won't let you do anything.
I just got my computer reformatted, and lost all icon customization. I went to change them and did all successfully (most in Candybar), but the Finder has been a problem. I initially forgot how to do it, so some research said I could do it if I simply replaced the file in the System/Library/CoreServices/Dock.app/Contents/Resources (Finder.png) path with my own of the same name. I did, but it didn't take - still blue. So then I did it through Candybar and it just disappeared from the dock. I've tried reverting the Finder.png file and nothing, as well as restoring the original icon through Candybar.
I saw one answer about booting a clone, so I researched how to do that, and can't do it on my internal for some reason. I tried an external, but it said it'd have to wipe all files first, which I won't.I should add that an archive and install isn't an option - I JUST got this fixed by Apple yesterday since I had lost my install disks, so I certainly can't do it myself.
I recently changed my Finder icon by replacing the .icns files in my CoreServices folder. The icon appears as it should in dialog boxes, but doesn't show up at all in the Dock. Instead there's just a blank space where it's supposed to be. It's still perfectly functional, but annoying. :-S
I've tried logging out/restarting, reseting the dock, deleting the dock plist, and creating a new user account (it's still missing on the new account). I'm running out of things to try, does anyone have a suggestion?
I have a serious issue on one of my lion file servers. Somehow it seems to have removed itself from the network control panel and doesn't even show up under system information. I followed the directions of removing the networkinterfaces file but they just created two WIFI profiles one called Ethernet
