we have time capsule and airport express. TC wifi protocols N and G.
and i want to extend two protocol with airport express.
but, Airport express extend only G protocol when I extend.
how to extend multi ssid (N & G) with airport express ?
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
When i try to extend my network with my Airport Express it creates another wireless network, wich is not what i want.
I have a Leve1 router as my main, connected to my modem.
My airport express is connected to the network with a CAT5 ethernet cable.
I use the setup in Aiport Utility and choose:
I Want Airport Express to join my current network ->
I want to connect AirPort Express to my network using Ethernet to extend my current netork or create a second network ->
I choose my network on the list and click continue ->
I want to connect AirPort Express to my network using Ethernet to extend my existing wireless network ->
And then it doenst join my network, but creates a new called Apple Network 00a133..
I am thinking about buying an airport express to extend the wireless coverage in my house.
I have a wireless router, however the signal does not quite reach the other side of the house. At the moment I use some network over mains equipment, like [URL], to connect a desktop up at the other side of the house.
I was wondering if I will be able to connect an airport express up to one of these power line adapters and use it in conjunction with the other wireless.
I'm trying to figure out the possibilities of the Airport Express. I have tried to draw up what I want and would like to know if t is possible. I want to use the Airport express as a frontend unit because of he ability to use AirTunes. Unfortunately my HDX 1000 is not wireless (NMT to play media to my TV from my NAS). Is it possible to extend the wired LAN from my Linksys to the AE and by that enable my HDX 1000 to play content from my NAS?
View 8 Replies View RelatedCan the new Time Capsule be used as a stand alone router or do I have to connect it to my existing Sky router?
I believe people on here call it bridging.
Can I use Airport express with it to extend my network or will I still need the Extreme?
Is it possible to extend my wifi network with my Airport express, knowing that my airport express is not connected by ethernet ?
View 1 Replies View RelatedSorry if this question has been asked many times before - I tried running numerous searches, but it's been difficult to find a straightforward answer to my predicament.
I have a time capsule and an airport express. I would like to extend the range of my wifi network as my modem (attached to the time capsule) is on the third floor of my home and I'd like to improve the strength of my internet connection to the lower floors. I've tried to set-up airport express (located on the 2nd floor, but initially set-up near my time capsule) and the time capsule with the extend range options, but my airport express doesn't seem to improve the range of the wifi. I tested my internet speed by running the test away from airport express, near airport express and with my laptop connected to airport express via ethernet. In fact, connecting the laptop to airport express seems to produce the slowest download speed and being near airport express does not seem to provide faster download speeds.
Can someone point me to straightforward instructions where I can setup airport express to extend the range of my wifi network that uses time capsule? Also, how will I know that airport express is extending my range? When I view my wireless networks, should I see my airport express as one of the wireless networks that I can connect to?
Can I use my Airport Express to extend my wireless network while using a Bountiful BWRG500 wireless router?
[URL]
Is it possible to run or are some of you running on airport extreme as your base and then using an express to extend the coverage of your Wifi?
View 1 Replies View Relatedmy router is linksys and i want to let my airport express join the network created by linksys wirelessly, would that be done? i was told at apple store that airport can extend existing network, what the problem is?
View 3 Replies View RelatedSo my Macbook is coming in the mail and I'd like to plan my wireless setup. I don't even have the AirPort yet but I like to think ahead. So I'll have my Macbook, a printer, my speaker system, and my Xbox 360 and I'd like to have them all working wirelessly. How would I go about setting this up? Can I use a router with the AirPort in case I need extra hard-wired ethernets (modem-router-AirPort)? Which parts are directly connected to the AirPort and which to the Macbook? Knowing where the wiring must go is crucial in the placement of furniture and equipment.
View 4 Replies View RelatedI have a slow network issue. I'll try to make it as simple as possible.
1 MacBook Pro
1 Airport Extreme
1 Airport Express to Extend the Network
The network to my living room was slow, so I added the Express to extend the network. When connected through the Express, with a Time Machine backup, I'm getting about 500K/sec transfer speeds. When I move the laptop away from the Express and close to the Extreme, the network works much faster, about 5MB/sec. I don't understand why the network is so much slower when using the Airport Express as a network extender. Is the speed difference normally that much? If it's not supposed to be, is there anything I can do?
At my university, there are multiple access points, all broadcasting on the same SSID with both 2.4Ghz (802.11b/g/n) and 5Ghz (802.11a/n) radios. In the spot where I'm having this problem, my Mac can see about a dozen of these access points with the same SSID. However, the problem is that I can't specify which one it will connect to. Here, there is substantial interference on the 2.4Ghz band, so it is unusable. My MacBook Air will usually connect on the 5GHz band, but it occasionally tries to switch to the 2.4GHz frequency on the AP, causing my connection to cut out.
Is there any way I can force my Airport to connect to a particular channel or access point? On my Windows machine I solved this problem by disabling the 2.4Ghz radio so that Windows would be unable to see those APs, but this doesn't appear to be possible on the Mac. I've tried searching for a solution without success.
If you have a wireless network using an AirPort Extreme, can you extend the range by using an other AirPort Extreme with? Or you can only do that with an AirPort Express?
View 1 Replies View RelatedCan Airport stream itunes and extend my wireless network at the same time?
I have an Airport in my 3rd floor bedroom that I use to feed iTunes to a receiver. When using my iPad (and iPhone) upstairs they are too slow since my wireless router is on the 1st floor. I have an Ethernet connection in my bedroom and could plug the Airport into it. If I hard wire the Airport can I still stream iTunes to my receiver and have it extend my wireless network at the same time?
We use our MacBook Pro in our RV, usually in campgrounds with wifi. Often we're not near the transmitter, and the signal is unusable.
We've seen Yagi antennas on other RV's, and wonder how one of these might be used with our Mac. Specifically, what do I need to connect such an antenna to the Mac?
I made an addition on my house and the reception in the new area is weak, can I purchase two MB763LL/A wifi units and then have them talk to each other (I can run a cable between the two units if that speeds up the network, currently the sheetrock is not installed on the addition).
Warm regards,
David Cappell
We recently bought a new AirPort Extreme. As we already have one, we want to hook them up by ethernet, and the new one should extend the wireless network created by the old one.
View 1 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedI have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
View 4 Replies View RelatedI currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
View 2 Replies View RelatedI recently moved into a new apartment that has an Airport Express connected to a cable modem. The network does not have a password. I want to put a password on it so that not everyone in the building can use our internet.
When I connect to the Airport via the Airport Utility, it recognizes the Airport, but asks for a password when I try to configure it. I tried doing a soft reset on the Airport, but it didn't change anything. Are there two passwords for an Airport? If so, how can I bypass the second one? The "Resetting Airport Express" page at [URL] doesn't answer this question. Do I need to do a hard reset? If so, is there anything I need to know about that? We no longer have any of the original literature that came with the product.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
View 4 Replies View RelatedMy neighbor has a blazing 10mb dl wireless connection which I can use. Problem, I'd like to use my Airport Extreme so I can hook up an external HD for use with Time Machine. I'd like to extend the Linksys wireless network with my AE.
Can this be done without needing a wired connection to set the two routers up? I'm hoping I can just connect my AE to the Linksys by way of remote setup.
If I have an event, starting on Friday, going on Saturday and and finishing Sunday, is it not possible to get this to show in the month view? I know it shows up in the weekly view, but it would be more helpful for me to have it up show up like this so I can get an overview of the month's forthcoming events. Or if it, are there any mods/addons etc that can enable this?
View 2 Replies View Related
