Software :: Airport Express Doesn't Extend Network?
Sep 18, 2009Is it possible to extend my wifi network with my Airport express, knowing that my airport express is not connected by ethernet ?
View 1 RepliesIs it possible to extend my wifi network with my Airport express, knowing that my airport express is not connected by ethernet ?
View 1 RepliesI have a slow network issue. I'll try to make it as simple as possible.
1 MacBook Pro
1 Airport Extreme
1 Airport Express to Extend the Network
The network to my living room was slow, so I added the Express to extend the network. When connected through the Express, with a Time Machine backup, I'm getting about 500K/sec transfer speeds. When I move the laptop away from the Express and close to the Extreme, the network works much faster, about 5MB/sec. I don't understand why the network is so much slower when using the Airport Express as a network extender. Is the speed difference normally that much? If it's not supposed to be, is there anything I can do?
When i try to extend my network with my Airport Express it creates another wireless network, wich is not what i want.
I have a Leve1 router as my main, connected to my modem.
My airport express is connected to the network with a CAT5 ethernet cable.
I use the setup in Aiport Utility and choose:
I Want Airport Express to join my current network ->
I want to connect AirPort Express to my network using Ethernet to extend my current netork or create a second network ->
I choose my network on the list and click continue ->
I want to connect AirPort Express to my network using Ethernet to extend my existing wireless network ->
And then it doenst join my network, but creates a new called Apple Network 00a133..
Can the new Time Capsule be used as a stand alone router or do I have to connect it to my existing Sky router?
I believe people on here call it bridging.
Can I use Airport express with it to extend my network or will I still need the Extreme?
Can I use my Airport Express to extend my wireless network while using a Bountiful BWRG500 wireless router?
[URL]
my router is linksys and i want to let my airport express join the network created by linksys wirelessly, would that be done? i was told at apple store that airport can extend existing network, what the problem is?
View 3 Replies View RelatedI just bought 3 airports: 2 new double band Airports extreme and 1 "N" airport express.
I have one of the Airport Extreme #1 connected to the DSL router and have configured the network, both 5 and 2.4 I have the Airpot Extreme #2 to expand the signal of the network (I realized that the Airpot Extreme as a bridge it only can replicate one of the networks 5 or 2.4. Is replicatiog the 2.4 network).
I've got an Airport Express that, when connected to the existing wireless network, continues to blink an amber light (No IP address, right?).
I've had the Airport Express create its own network, and I can stream music through to it just fine. When I have it join the network my laptop uses, the light just keeps blinking yellow, and I have to hard reset it to be able to get to its configuration again. iTunes never sees it.
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
I am thinking about buying an airport express to extend the wireless coverage in my house.
I have a wireless router, however the signal does not quite reach the other side of the house. At the moment I use some network over mains equipment, like [URL], to connect a desktop up at the other side of the house.
I was wondering if I will be able to connect an airport express up to one of these power line adapters and use it in conjunction with the other wireless.
we have time capsule and airport express. TC wifi protocols N and G.
and i want to extend two protocol with airport express.
but, Airport express extend only G protocol when I extend.
how to extend multi ssid (N & G) with airport express ?
I'm trying to figure out the possibilities of the Airport Express. I have tried to draw up what I want and would like to know if t is possible. I want to use the Airport express as a frontend unit because of he ability to use AirTunes. Unfortunately my HDX 1000 is not wireless (NMT to play media to my TV from my NAS). Is it possible to extend the wired LAN from my Linksys to the AE and by that enable my HDX 1000 to play content from my NAS?
View 8 Replies View RelatedSorry if this question has been asked many times before - I tried running numerous searches, but it's been difficult to find a straightforward answer to my predicament.
I have a time capsule and an airport express. I would like to extend the range of my wifi network as my modem (attached to the time capsule) is on the third floor of my home and I'd like to improve the strength of my internet connection to the lower floors. I've tried to set-up airport express (located on the 2nd floor, but initially set-up near my time capsule) and the time capsule with the extend range options, but my airport express doesn't seem to improve the range of the wifi. I tested my internet speed by running the test away from airport express, near airport express and with my laptop connected to airport express via ethernet. In fact, connecting the laptop to airport express seems to produce the slowest download speed and being near airport express does not seem to provide faster download speeds.
Can someone point me to straightforward instructions where I can setup airport express to extend the range of my wifi network that uses time capsule? Also, how will I know that airport express is extending my range? When I view my wireless networks, should I see my airport express as one of the wireless networks that I can connect to?
Is it possible to run or are some of you running on airport extreme as your base and then using an express to extend the coverage of your Wifi?
View 1 Replies View RelatedIf you have a wireless network using an AirPort Extreme, can you extend the range by using an other AirPort Extreme with? Or you can only do that with an AirPort Express?
View 1 Replies View RelatedI made an addition on my house and the reception in the new area is weak, can I purchase two MB763LL/A wifi units and then have them talk to each other (I can run a cable between the two units if that speeds up the network, currently the sheetrock is not installed on the addition).
Warm regards,
David Cappell
We recently bought a new AirPort Extreme. As we already have one, we want to hook them up by ethernet, and the new one should extend the wireless network created by the old one.
View 1 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Back when I did this last time I found some detailed instructions, but of course I didn't bookmark them. I now changed the channel and now I lost the connection to the second one, which is only used for music.
I have a WPA/WPA2 password and an restricted access list.
We're on Leopard.
Im a Little bit of a Nooby when it comes to this
How to Set up a new network with my airport express
How to Set up in What is in the Screen Shot
The Airport Express (AE) doesn't works as expected.
View 3 Replies View RelatedNew here and new mac user all together. I have looked quite a bit for an answer to this question but have not found one that applies directly to my situation.
My dilemma is that my apartment complex has free (unsecured) wireless but currently with my macbook pro, I can not register the signal in my living room. I just got Airport Express with the idea of extending the signal to all areas of my apartment. However when I go to "Join current wireless network", the apartment's signal does not show up (two other networks do show up though they are password protected).
I have read here that certain routers are not compatible with Airport Express (is this true?) and I am wondering if that's a possibility here.
Is there a fix for this? Do I need access to the router?
Just installed my very first wireless network: Airport Extreme. NOT AIRPORT EXPRESS
Stumbled through the installation, and everything works.
However, in the process the software apparently selected a network name for me; and I would very much like to change that network name. I have crawled through the Network Preferences under System Preferences, but I can't find a way to do this.
I already have an airport extreme to go along with my new alum macbook. But my wife's pc laptop and my iphone are only G wireless and not N so when they are in use it slows the network way down. If I bought an airport express could I link them together on the same network (to share printer and HD on the extreme) and have one handle the N traffic and one handle the G traffic?
View 8 Replies View RelatedI updated 1 of 3 expresses to 7.4.2. Using it to stream music with Airfoil suddenly stopped. Got it put back to 7.4.1 but it will still not join the network other than when it is connected via ethernet cable. Two other expresses work. Been to genius bar. This is doing my head in. Had wonderful full house steaming sound with iTunes or Airfoil. Have tried everything i can think of.
Has anybody else had this problem.
Is there a solution. I have reset it several times both hard and soft resets.
I just bought a second hand AirPort Express.
After trying again and again and failing to connect to my home wireless network which has a password, I tried again after disabling the password, and it worked fine, I'm playing music via iTunes through it right now.
Problem is, I'd obviously prefer a secured network, why can't I connect to a secured network? I'm using a Linkseys WRT160N Router as a base.
I want it to provide a boost to the signal in the basement for my touch. As well as stream music from my laptop. The issue Im having is that the music keeps on cutting out. The newer one this is listed under is working fine, but on the other side of the room, it is setup to Extend the 'n' network (which I assume means allow my laptop better signal in the basement.)
The older one is on a b/g network, which I setup as a WDS network and then setup the express as a WDS relay, which I assumed would provide signal strength for the b/g network in the house (so we are running b/g & n). But setting it up as a relay it still loses connection with the laptop (I am assuming this is with the b/g network itself) and I believe that the touch's WiFi connection also drops with the music, because it is all the b/g network.
The b/g network trickles into the basement, but I assumed with the b/g touch setup as a WDS Relay, that it would strengthen the signal for my touch and ALSO keep the signal strong between the laptop and the express (Im guessing they are talking over b/g). But after being setup as a WDS relay the music is still dropping, and I only assume the touch's wifi signal is dropping as well! I also had to setup the ENTIRE b/g network as WDS because I did not get an 'extend range signal'.
I've come home from college for the summer and set up my PC and iMac in my bedroom. However, the wireless signal from the router in the basement (a cisco m10 wireless n router) is very weak and cuts out frequently. I have an Airport Express and was hoping to use it as a wireless repeater/range extender, but can't seem to figure it out. I know there is no "official support" for use as a repeater with non-Apple routers, but is there a way around this? If so, how can I set up my network?
View 1 Replies View RelatedMy computer is recognizing my airport express network at first but then slips to an exclamation mark. I have followed the steps to reset everything and it ends up keeping me on a loop of asking me to rest everything after I do so. network is recognized on list along with all my neighbors.
View 6 Replies View RelatedThe case: I want to plug in the Ethernet LAN cable from my DSL cable modem to my Airport Express so that it provides me with W-LAN for my notebook (Sony VAIO, soon to be MacBook Pro owner). The problem: The Airport Express doesn't recognize the Ethernet Internet - it just tells me that there is nothing plugged into its WAN port. (But the cable is!) If I plug the same cable directly into my notbook WAN port, it works fine so I guess there's no defect in the cable ... Settings are PPPoE (needed to connect to my Internet). Any other information needed? Just let me know. If anybody out there has a hint for me, let me know. I wonder if this is a Windows thing? On the other hand - as the Airport Express doesn't recognize that the Ethernet cable is plugged in - it doesn't matter if MAC or Windows cause this is even a step before the computer itself comes in play.
View 17 Replies View Related