Hardware :: AirPort Express Multi-Peripheral Setup
Jan 14, 2009
So my Macbook is coming in the mail and I'd like to plan my wireless setup. I don't even have the AirPort yet but I like to think ahead. So I'll have my Macbook, a printer, my speaker system, and my Xbox 360 and I'd like to have them all working wirelessly. How would I go about setting this up? Can I use a router with the AirPort in case I need extra hard-wired ethernets (modem-router-AirPort)? Which parts are directly connected to the AirPort and which to the Macbook? Knowing where the wiring must go is crucial in the placement of furniture and equipment.
View 4 Replies
ADVERTISEMENT
Dec 14, 2010
we have time capsule and airport express. TC wifi protocols N and G.
and i want to extend two protocol with airport express.
but, Airport express extend only G protocol when I extend.
how to extend multi ssid (N & G) with airport express ?
View 1 Replies
View Related
Jan 31, 2009
I have a Intel iMAC 2.4GHz. I know it has build in Airport Extreme. I also have a Airport Express 802.11n. I am having some difficulty making it do what I want. I am wondering if it is even possible.
This is my setup:
DSL modem -> iMAC in office connected via ethernet.
Airport Express -> Airtunes, USB printer, Dish Network DVR connected to Ethernet in living room.
My question is can I share my DSL connection from my iMAC to the Airport Express then to my DVR (wired) and even my Wii (wireless)?
View 3 Replies
View Related
Dec 10, 2009
I have a WiFi network setup with two Airport Expresses. One is "n" and one is "b/g". After a day or so I notice that the wifi speed degrades significantly. I'm not sure what settings to play around with. Could it be the channel? In general, is there a better channel to select?
View 5 Replies
View Related
Dec 22, 2009
I'm planning a simple setup: Mac 21.5, email, printer, some music. My internet comes through modem and Ethernet cable. To unclutter my table, I want everything to go through Airport. But which one will do the job?
View 3 Replies
View Related
Aug 1, 2009
Play Itunes and no music playing in stereo.
1. Computer running Win XP Pro
network connection as shown below
Internet <->Router<->Dlink Switch<->Dlink Wireless Router (no Dhcp)<->Airport express hard wired to Wireless Router<->Plugged to Stereo
Can connect to either Dlink Wireless router or Airport Express.
Tried playing music while connected to airport = no music
Tried playing music while connected to Dlink = no music
I check in Itune if in the preference the check mark was set in music look for remote speakers and it is set.
View 2 Replies
View Related
Aug 25, 2009
I have been trying to set up an AirPort Express in client mode so I can have some remote speakers to listen too but I have been having problems. I have everything set up and I go into AirPort Utility and choose the Express (at this time I have selected the Express as my network). I am able to choose the option to join an existing network (my AirPort Extreme) and AirPort Utility then shows me my settings and everything looks okay, but when APU restarts the Express I get an error message that says that APU can not find the Express's network. I go to the Express and it is blinking amber (not a good sign). I have the Express' MAC added to the Access Control Pane in the AirPort Extreme's preferences. I have read Apple's support article and followed it to a T and yet I still get the error message.
View 1 Replies
View Related
Dec 16, 2008
I'm trying to connect an AE to my PC using XP with a D-Link DIR-655 WiFi router. I've used the airport utility and connected the AE to my router via ethernet. It appears to be setup properly and I can see it on the D-Link software. After disconnecting the ethernet cable and with the AE sitting next to the router it continually shows up and then disappears. The light is green on the AE. Then I disconnected the power and moved the AE into the place where I'm going to use it.
Now it will show up on my D-Link software occasionally but the light won't turn green. It also doesn't show up on the airport utility software. I also have a Touch and ATV that both work fine on the same network and the same location. The AE is about 30 feet from the router with only one wall in between them. Am I missing something here or could there be a problem with the AE?
View 6 Replies
View Related
Aug 17, 2009
im off to college in 2 weeks and would like to set up a wireless network in my residence room with my airport express. Its a small room, but i would still like to be able to move from my desk to bed or whatever without wires, and also i would like to be able to hide my printer somewhere. Heres the catch. My residence doesn't allow wireless networks for some reason. I know i can make my network hidden. But will that be enough to keep them from finding out? I imagine every now and then they might just scan for networks to see whats out there. But if mines hidden, i shouldnt have a problem, correct? Just want to make sure. Not sure what the consequences are, but im sure they would just ask to shut it down.
View 21 Replies
View Related
Mar 24, 2008
I picked up a Time Capsule 500GB and an AirPort Express 802.11n today. I am trying to setup my network as follows.
Time Capsule as base station
AirPort Express as as range extender
I would also like to set up the AirPort Express to use it's ethernet port to provide internet for my DirecTV HR20 HD DVR. I've currently got everything connected and running, and the HR20 gets an IP address, however, it says that there is no internet connection.
View 7 Replies
View Related
May 14, 2009
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies
View Related
Mar 19, 2008
Just purchased a Mac Pro (my first Mac after being a long time PC user) and need some advice for carving up the disk partitions to run some other operating systems on an additional 500GB Seagate HDD.
I want to run Windows XP on a 100GB partition of the Seagate drive and use the addition space, about 380GB, to run Solaris and Linux for work specific simulation programs via VMware Fusion. I know I could run some Linux programs on OSX, but I�m trying to keep work and personal data completely separate.
I installed XP using Boot Camp with no problem on the 100GB partition and left the rest of the disk as Free Space.
My problem is getting the Free Space partitioned so I can use it to host the other OS�s running VMware Fusion. When I use the disk utility to partition the rest of the disk, it goes into �Modifying Partition Map� and hangs. I left it on all night and it didn�t finish.
Is there an easy way to make the 380GB left on the Seagate drive usable for the OSX or do I need to do something different? I�d like to avoid re-doing the Boot CampWindows layout since everything is working great on that side.
View 1 Replies
View Related
Apr 25, 2010
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
View 1 Replies
View Related
Jan 29, 2009
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies
View Related
Oct 11, 2009
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
View 4 Replies
View Related
Sep 7, 2014
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
View 2 Replies
View Related
Sep 5, 2010
I just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
View 1 Replies
View Related
Apr 18, 2010
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
View 9 Replies
View Related
Jan 11, 2009
MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
View 4 Replies
View Related
Mar 9, 2010
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
View 1 Replies
View Related
Mar 13, 2012
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
View 2 Replies
View Related
Jun 3, 2009
I recently moved into a new apartment that has an Airport Express connected to a cable modem. The network does not have a password. I want to put a password on it so that not everyone in the building can use our internet.
When I connect to the Airport via the Airport Utility, it recognizes the Airport, but asks for a password when I try to configure it. I tried doing a soft reset on the Airport, but it didn't change anything. Are there two passwords for an Airport? If so, how can I bypass the second one? The "Resetting Airport Express" page at [URL] doesn't answer this question. Do I need to do a hard reset? If so, is there anything I need to know about that? We no longer have any of the original literature that came with the product.
View 1 Replies
View Related
Feb 13, 2010
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
View 4 Replies
View Related
Sep 22, 2009
I am trying to set up my sequence so it is DV PAL 1024 x 576 and I can't seem to find the option. My sequence currently says it is 720 x 576.
I can import clips as 1024 x 576 but when i put them in the sequence it cuts the top and bottom out and when i tried to scale them in the sequence window it wouldn't let me but in the source window I can see the edges.
View 1 Replies
View Related
Aug 10, 2010
Having issues in setting up my Apple Extreme + Apple Express to my Linksys E2100L ROUTER/NETWORK. I have Green lights on my extreme and express with the Linksys router having the extreme attached to the router (ethernet) with express in another room for my Blu-ray. The Linksys does not see the Extreme or Express. I am using WPA2 Security on the Linksys router. How can I get the Linksys to see the Apple Extreme/ Express? Is there something I need to do on the Linksys end or on the Extreme/Express so that they can talk to each other?
View 4 Replies
View Related
Apr 27, 2007
If I have an event, starting on Friday, going on Saturday and and finishing Sunday, is it not possible to get this to show in the month view? I know it shows up in the weekly view, but it would be more helpful for me to have it up show up like this so I can get an overview of the month's forthcoming events. Or if it, are there any mods/addons etc that can enable this?
View 2 Replies
View Related
Oct 25, 2009
I'm thinking of making the jump and making my first Apple computer purchase. Time machine will be a welcome native backup solution, especially since I can do it over the network automatically. However, I've read that Time Machine naturally requires HFS+ formatted disks. But I will still have my Win7 laptop for gaming purposes, and of course that requires NTFS or FAT32 for writability. My question: Can I just take a TM compatible external drive, split it into two partitions, and then specify that each computer backup onto its own partition with its own file system?
View 4 Replies
View Related
Mar 4, 2010
I have an old SCSI dedicated slide and negative scanner. It produced scans so much superior to the two newer scanners I've tried, so I'd love to put it back into use. The available SCSI-USB adaptors are expensive, and the software for the device isn't available to work with Tiger or Leopard OS anyhow. I am thinking of looking for an ancient Mac to use the scanner with, or maybe even an old PC. Any feedback on what a smart way to bring my old SCSI Polaroid Sprintscan 3500 scanner back to life?
View 2 Replies
View Related
Aug 16, 2006
Can you hook up any compatible LCD peripheral to a G3 ibook?
View 1 Replies
View Related
Jun 13, 2005
Can anyone explain to me Airport Extreme and Airport Express and their functions?
View 8 Replies
View Related
