Hardware :: Finding USB Extender Over CAT6
Jan 11, 2011I am looking for a USB Extender that will push the signal over ethernet at a distance of 210ft minimum.
Everything I seem to find won't operate at that distance.
I am looking for a USB Extender that will push the signal over ethernet at a distance of 210ft minimum.
Everything I seem to find won't operate at that distance.
If I just want to have my new machine exactly as my last one, what is the best way?
I am thinking a Cat6 cable to connect the two and use Migration Assistant on the new machine. If this is the best, does the old machine need to be in Target mode?
I just got the new beats by dre in ear headphones. Can any one recommend a good extender to reach my mac pro thats on the ground. Its not fitting well to the headjack in the front port of the tower.
View 1 Replies View RelatedCan I use the AE as an extender to my already established wireless network and if so how does that work? I mean does it require to be hard wired to my router or does it connect wirelessly?
Sorry, I really don't know much about this stuff and I'm just getting started.
Because of my house configuration, I do not get a very good signal on the far side of my house so hubby said to get an extender.
Quick question...don't know if this is the right place to post...I need to connect a printer via USB but the cord is not long enough. I am planning on buying two USB extender cables (with a male and a female end) to reach the distance. The total cord length should not exceed 18 feet, but will I loose signal at that distance with the signal having to travel through 3 different cords?
View 9 Replies View RelatedUsing an Airport Extreme located in the basement, I am unable to get optimum wireless signal in the upstairs portion of the house. If I add an Airport Express as an extender, would I have to have two separate wireless networks or would the Express be the same network? A single network would be preferable.
If the above works, the goal would be having the Express located upstairs and hard wired to the Extreme downstairs. The Express would be hard wired via USB to a printer and the printer hard wired to an iMac. If I understand that connection correctly, it would allow for wireless printing on a laptop via the Express without having the iMac on.
My home network is using a Netgear wireless router, which is just used for sharing the internet. I was wondering if Airport Extremes could be placed in another room to connect to a USB hard drive and share it, as well as extending the internet from my Netgear wireless?
View 12 Replies View RelatedI have a friend who has internet coming thru cable into the living to an airport express. We are wondering if he can use an airport extreme as an wds extender in the basement home office, where there is not a cable hookup. The office has several PCs and several printers. Some of the PCs could be wired(ethernet) or wireless to the extreme. Would this situation work? Could airtunes be used in the living, and the extreme be used as a print server in the basement? Also would airdisks be supported on the extreme since it is being used as a WDS?
View 3 Replies View RelatedBecause that would make or break the purchase for me, if the USB cable is still as small as it is.
View 4 Replies View RelatedOn the Bestbuy website they market the airport extreme as having the capability to become a range extender and the guy in the store said it would work with a linksys. The Linksys is a WRT150N. I have the airport extreme set-up in my room and it has a solid green light. When I go into the set-up for it I click join network and It sees the linksys and I select it and it says everything is working fine but it stays on the green light and the signal isn't being extended.
View 2 Replies View RelatedSo, first time setting up an Airport Express. I had read that the Airport Express can be used as a range extender so I figure I'd give it a shot. Using the Airport Utility, I followed the directions to set it up to "connect to my current wireless network". It found my SSID and I was able to put my password there too. I had named the Airport Express "iqwertyi Extended". Everything looks fine, now my question is, am I suppose to see this SSID?
Or am I only supposed to see the original router "iqwertyi"? The reason I ask is that I don't see the new "iqwertyi Extended" SSID and connecting to the original "iqwertyi" on the other side of the house doesn't seem to have a better connection. I had plugged in the Airport Express in the middle of the house, but not sure if I set this up properly.
I have a Linksys WRT54GS ver 1.0 as my wireless router. It has an external signal booster to 500mV and a high gain 9db antenna. My iMac is connected through Ethernet to the router.
The main use is to stream music using couple of Slimdevices Squeezebox units. The signal of the one in my bedroom is in average 68% so I want to extend my nextwork to impreve the signal.
I jut bought an airport express and I would like to use to extend the network. So far I have been able to connect the AE to the existing network but not to extend it. My network is WEP 64 encrypted.
Does anybody have the steps on how to set up the AE to extend the network?
I just purchased a wired Mighty Mouse but the cable is very short. What extender would work with this mouse?
View 5 Replies View RelatedJust a report on my successful upgrade from a Mac Pro 2006 2.66 quad (5150s) to a 3.00 quad (5160s). It was pretty easy, but I can't stress enough having the right tools, particularly the long, thin 3mm allen wrench. You need about 10" of length to get down to the heatsink nuts on the motherboard. I thought my adjustable screwdriver with extender would work, but the extender was too fat for the cutouts in the heatsink. You need a rod no more than 5/16" wide. Also, though people have said that a 15 Torx works (it does), I actually think the 3mm hex is the perfect fit. It may be tough finding these locally, even at a home depot, so you may want to buy online ahead of time unless you want to splurge and buy a set of long allen wrench keys (~$25 and up). The other challenge was connecting the lower heatsink's temperature sensor cable to the motherboard. If you have fat fingers like me, an angled hemostat or needlenose pliers will help you get into the tight space. And lastly, a small vacuum cleaner would be useful to suck all of the dust bunnies off the heatsinks and the fans and out of the motherboard's nooks and crannies. While you're in there, you might as well clean it out
View 10 Replies View RelatedSo I just bought a new revision Airport Express, so from reading I've learned that the AE can act as a bridge/wireless extender for my AEBS (dual-band), my question is, can it only do either N-5ghz or G2.4ghz, and not both at the same time? Also can anyone give me some ideas on Real Life range I should expect to get with it? If I can in fact only do one band, I'll be doing the G band as N pretty much covers everywhere but G isn't so good at penetrating the walls it seems.
View 5 Replies View Relatedmy situation goes like this.. theres a router(main) which is connected to the internet modem and this router provides internet for the whole place. its located in my roommates room and he like it that way.
i have a time capsule which id rather connect to, since its got my time machine back ups and all my other files(which in total is 1.2 tb). i connect an aditional external and a printer to my time capsule which works perfectly fine.
now here the problem, iv been trying to find a way to get my time capsule to connect to the main router wirelessly, since my roommate dosnt want to move his router and he dosnt want all my stuff is his room. in addition we would like to avoid using a Ethernet cable.
I am a Windows user at the moment and plan to get a MBP in a few months. I am currently using a D-Link DIR-655 router. My house is a 2 story plus basement, and the D-link pretty much needs to be in the basement. We get excellent wifi reception in much of the house, but it is very spotty on the 2nd floor (an open to the first floor loft) and on the end of the first floor of the house opposite the router.
I like the idea of being able to use AirTunes, so I was thinking of buying an Airport Express as an extender to get usable reception throughout the house. I figure eventually, I may replace the D-Link with an Airport Extreme.
So can I do this wirelessly or do I have to wire the Express to the D-Link? Doing so would involve making holes in things that I don't want to make holes in, so I will put up with a spotty wifi network rather than getting an extender. Our house is a log home with hardwood floors and wood walls and ceilings throughout, so it is not as easy as patching some drywall if we decide to get rid of the wire/hole someday.
I am not a power user, not a gamer and if I want to download huge files, I can do so on the laptop in the basement. I just want a decent wireless connection throughout the house, and would like the ability to stream iTunes.
And if the Airport cannot be a repeater for the D-Link, what about the reverse, with the Airport as the base and the D-Link as the repeater?
I am tryong to use my apple range extender with my xfinity rouder, is this possible
Info:
iPhone 4, Windows XP Pro
I picked up a Time Capsule 500GB and an AirPort Express 802.11n today. I am trying to setup my network as follows.
Time Capsule as base station
AirPort Express as as range extender
I would also like to set up the AirPort Express to use it's ethernet port to provide internet for my DirecTV HR20 HD DVR. I've currently got everything connected and running, and the HR20 gets an IP address, however, it says that there is no internet connection.
I am running ATT DSL Extreme 3.0 and have a Linksys WRT54G wireless router. I currently only get wireless in approx. half of my house, and the half in which I don't get it, will be needing it. So I am going to need to buy a range extender or wireless access point? I am a college student so I don't have a large budget, but I am looking for advice. Should I stick with Linksys and just buy one of their range extenders, or should I buy an Airport Extreme and hope the N signal is stronger? I am going to be sharing files soon when I get my Mac Mini HTPC setup going on in the living room to this from my other iMac's and MBP.
In summary, I am just not sure if it would be worth the extra $ for the Airport extreme or if I should just stick with the linksys.
just before I ask the question, i'm not in the market, not at all in fact, I'm just intrested to see if the new mac pro's are as fast as the 8 core 3.2 ghz model which holds the highest geekbench score of that mac.
So, what is the fastest, cheapest one out there?
Anybody know of Mac software which is free that will convert MKV to a format I can burn to DVD?
View 3 Replies View RelatedI want to add some ram memory to a Mac Pro at my workplace. The Mac Pro came with 2 GB 800 MHZ. Do you think I can add this type of RAM to it? This is not ECC memory.
Also, I have red that in order for the Mac Pro to work properly needs to have all the ram sticks of the same quantity (1 Gb for example). Is this mandatory? Could I have 2 sticks of 2 GBs each and 2 of 1 GB each?
I'm tired of running iTunes off an external and it being all laggy. I want to substitute the 160 GB HDD inside my late '09 mini with a 1 TB drive.
View 9 Replies View RelatedIs there a 10.6.4 retail DVD available for purchase?
A friend bought one a bit ago, but it was 10.6.3.
And how is it performing? how do you like it?
View 24 Replies View RelatedI wan' t to buy a Blu Ray reader to rip my Blu Ray and saw it directly via Boxee Box or other media player software.
I don' t need to write disk with that drive.
Well the time has come to change the Hard Drive in my late 2009 MAcbook. Seems that 250GB got filled up much faster then I expected and I'm left with only 40 GB or so. With that I'd like to swap out to old drive for either a 320 or 500 GB one. but I"m not sure exactly which drive to buy and what exactly will fit. The advice from the members of this forum has been invaluable to me in the past so here I am again. What would you all recommend?
View 7 Replies View RelatedWhen my mac boots there is a loading bar underneath the apple, it doesnt take that long, but It is a brand new hard drive that apple just replaced, none of the disk repairs/verifications worked. If I replaced the hard drive with another SATA would that solve the problem? I have a 1tb that I am waiting to install because i think my computer might be frying hard drives.
View 2 Replies View Relatedi need this addon for excel which is regression software or something for excel. I cannot find this addon for the mac version and i do not want to use a stupid pc for excel. Any addon that is like regression? i need it for school.
i believe its called rinlex cause in my syllabus it says
In addition to Microsoft Excel an Excel add in called Rinlex is available on the web page and also in the computer lab.