I will be getting a MacPro 3.33GHz soon, and need to find the right Smart UPS system that will allow the MacPro to automatically save and shut down.
I've been searching through the specs on many Smart UPS systems and have found very few that list Mac OSX on the system requirements.
I read that the new 6 core Mac Pro's use 32nm technology.
I guess this means a different mobo to the one in the 2009 4 core models?
Apple are offering an upgrade from 4 core to 6 core on the new models, so I'm wondering if I could do the same to my 2009 model or would it not be as simple to swap out the mobo as I think?
1) Can I take my secondary drive in my Powermac G5 and install it into my forthcoming Mac Pro ? Or is the SATA interface different on the new machines.
2) Ordering extra memory from Crucial to save $, what's the situation with 'fans' and things on the memory. I'm confused, totally. Does the mac pro's require additional heat cooling on the memory, does the memory from crucial come with this, is it easy to install like the powermac or am I going to be left floundering like a fish out of water....
Does anyone have any experience with putting new hard drives in a 1.33ghz iBook 12" and in a 12" PB 1.5ghz -- that both have the sensor motion thing on the hard drives?
Is this motion sensor a physical part on the hard drive or something within the connection itself?
I also want to put a superdrive in the iBook 1.33ghz.
If anyone has any tips or advice, would be welcomed... as I believe the iFixit site's photos are for earlier revision machines.
I have been searching a lot and doing some reading to find out what to do to get better system performance. I bought my MacBook pro mid 2007 the configuration are 2.33GHZ, 2GB Ram. My system can only go up to 3GB Ram and has two slots to fill the ram. Currently, I have 1GB in each of them. Now the questions is
1. Should I put 1GB in one and 2GB in the other to make it 3GB total?
2. Should I put 2GB in each to make it 4GB total?
I found out that matching pairs are good and if I put 4GB it will only use 3.2GB and the rest will be just unusable. If I put 3GB then it will not match but still gives you performance.
I have read goods and bads for both and now highly confused what to do? I want to request my Mac users to please give me some suggestions, hints and better reasons to apply.
I bought my system for $2700.00 when it first came out. Now do not think it is smart to sell it for $1200.00 (If I am lucky) and spend extra $600.00 to get 2.8GHz.
I can afford both rams as they are really cheap now. I use my mac for surfing, movies both online and offline, some time PS and Aperture, I do tends to have about 10 different apps open at the same time, for example ( Skype, Safari, PS, MSN, Yahoo, Ichat, ITunes, etc). I am also thinking about playing some games on my Mac such as Call of Duty, Fall out 3 and stuff.
I had to exchange my 4 month old 21.5" iMac 3.33ghz/ATI/1 Tb/8Gb today the disc drive was scratching all my dvds.My local Apple store offered me the 27"
" 3.20ghz i3 model. is this one an improvement over the 3.33 Ghz one. I know the screan size and graphic memory but I would like in detail is this faster better pro cons etc
I'm running photoshop 7.0, Illustrator 10, In Design 2.0.1, Microsoft Office is old. I'm running into problems like my itunes not working, adobe flash videos not working, some website suggesting I update my browsers. I have 768MB Ram and can upgrade to 1GB if you think this will work? I just want to make this work for another year or so until I can save some money in our company and upgrade to a new computer.
Info:MacBook, Mac OS X (10.4.11)
According to my iStat pro, my core temperature is running at almost 100c when my computer is doing a tough task (rendering video for example), despite my fans doing 6000rpm. Is this ok?! I'd thought about perhaps cleaning the fans on my laptop (macbook pro, core 2 duo 2.33ghz, not unibody), is this a possible solution?
View 2 Replies View RelatedAre there any problems I should anticipate in swapping out the original combo drive in a 1.33ghz iBook for a superdrive? Any software issues?
Anything I need to know about making it work other than making sure it is physically in the right position?
My main lappy is a last revision 1.33GHz 12" iBook G4 with GB of RAM. In the past month or so, it has gotten slower and slower. Everything lags, and today when I entered an address into Camino, it took it a full 90 seconds to realize I had pressed enter, and get rid of the drop-down autocomplete.
I recently upgraded to Leopard. I thought this would help, but apparently not. Sadly. I just purchased a T41 ThoughtlessPad because i needed a FUNCTIONAL laptop.
I've previously owned a 12" iBook G4 1.07GHz, and had a resolution of 1024 X 768 on my 17" DELL P780 display. Now I have a 1.33GHz G4 iBook. Same size. Wouldn't go past 800 X 600, I tried restarting, Display Preferences, EVERYTHING.
View 5 Replies View RelatedI'm currently using a MBP 2.33Ghz with 3gb of ram.What I want to know is how much faster are the latest machines, I find Aperture slow to load images and Photoshop can be slow to apply filters at times.I'll be waiting for the announcement but how does my machine compare to the current fastest MBP's?
View 4 Replies View RelatedI'm running Leopard on my iBook G4, 1.33GHz. I am using it with an external keyboard, mouse, and monitor, but the "clamshell mode" is not supported on iBook G4s. I've tried Sleepless and InsomniaX, but they both don't work.
View 2 Replies View RelatedCan anyone confirm the real-life differences in speed between a PC2700 1GB chip and a PC2100 IGB chip in a PowerBook G4 1.33Ghz which normally takes the PC2700? I know the slower chip is compatible so I'm just wondering about the difference in performance. I can get it at half the price of the normal, slightly faster chip.
View 5 Replies View RelatedUnder Tech specs for new 2009 Mac Pro:
"Turbo Boost dynamic performance (up to 3.33GHz on 8-core 2.93GHz system)"
As this is a feature of the chip I'm assuming this is true for the new Quad core as well. Is it? How can I find out? Any online reviews/overviews/etc. that looks at the new chips?
I'm one of the many many people who are juggling mac pro options in my head.
is the 3.33GHz Westmere worth the extra 640? Probably not, but now much faster will be it? 20%....30%?
I think I'm set on either of these two options, mainly using FCP and photoshop and a bit of motion. maybe a bit of gaming
Also I can max out them four RAM slots and get a 5870 with the extra cash.
In the PC world, most latest motherboards support either SLI or CrossFire. How about the MacPro's motherboard?
View 15 Replies View RelatedThe 8800GT in my Mac Pro 1,1 just died. I'm back up with the 7300 for now.
Can I adapt the EVGA's GeForce GTX 285 Mac Edition for use? It comes with the cables, and I more than willing to pay the extra $$$ to save myself hunting around for parts.
I'm also a bit confused about the 4870 upgrade. Does the Apple version work out of the box on my 1,1? If so, maybe that's the way to go for now?
I'm trying to reboot Snow Leopard on a Mac Pro and reformat the HD. But of course, nothing can ever be easy and the darn thing will not boot from CD..It just boots from the HD and takes me to the login screen everytime,has anyone else had this problem?
Info:
Mac Pro, Mac OS X (10.7.3), Snow Leopard Mac OS X 10.6
Can I adjust a Macpro to a MacBook pro?
Info:MacBookPro, Mac OS X (10.7.4), 13" core i7
I'm putting together a workstation that primarily is going to be used for Windows development and I wanted to have as fast a disk subsystem as possible.
It doesn't seem to be BootCamp drivers available for the card that Apple sells, so I found this card instead:
[URL]
It has EFI firmware and is able to boot MacOSX from raid arrays. The only question is if it is able to boot stuff through Bios emulation.
Vista x64 is the primary target here, and SP1 actually has EFI booting support, so it might be possible to use this. However when I tried to install Vista x64 with SP1 integrated on the MacBook Air I wasn't even able to boot installer DVD because of EFI incompatibilities.
Anyone have any experiences with booting BootCamp on a MacPro with a raid card?
I am a student who is currently starting to work on some at home projects with cartoon animation (Toon Boom) and Video Editing (Final Cut/After Effects). I have a Dual 2.0 G5 with 1G Ram. Would there be a significant advantage in upgrading to a Dual 2.8 Mac Pro? I could probably get 700-800 dollars for the current computer so, would dropping 2000 on a new tower give me a huge boost in performance? (Money is kind of an issue but not if the difference is staggering.) Or should I just upgrade the RAM on my current tower, be happy with what I have and quit jabbering?
View 3 Replies View RelatedI have a MacPro with 6 Gb memory installed, by a Mac authorized facility. At times, only 4 Gb is shown as available memory. I hav to reset the SMU, which regains the lost memory. I have to do this every couple of weeks.
View 1 Replies View Relatedok Im pondering buying a mac pro once they release the updates and I am wondering if I can take a 3.5" SATA drive out of my current desktop running XP and transplant it into the mac pro then use it with either VMware or bootcamp. So will this work or will I have to partition my hard drive and buy another copy of XP?
View 18 Replies View RelatedWith Snow Leopard on the horizon, and there already being some 64bit operating systems out there which are a hassle to get working with the "woodcrest" MacPro machines, eg, W7 x64 is a no go, and I have read that it is a PITA to get Vista x64 going(and a waste of time anyway). It has gotten me thinking, will Snow Leopard work in true 64bit form in the machine that was advertised as a 64bit Pro workstation?I am eager too see how much of a difference Grand Central and Open CL make!
View 24 Replies View RelatedI'd like to change my system drive on my Mac Pro to the Intel X25-m 160 gig I just purchased.When I previously upgraded my laptop to SSD, I used carbon copy cloner to clone the internal drive onto the SSD.Unfortunately, I had a couple of authorization issues, one of which being for CS3. Somehow cloning the internal drive onto the SSD and replacing the internal drive with the SSD tripped up the authorizations.
On my Mac Pro I have a few more programs I'm worried about having to reauthorize if the same thing happens. All programs are legal installs, so I could reauthorize, but it is a headache. Especially since some of the companies only allow a certain number of installations and having changed laptops and desktops since purchasing the apps means that some of these programs will require the lengthy process of emailing and explaining the situation to the manufacturer.Given that I'm just trying to change the startup drive, how can I avoid these issues?
Would like to run WinXP pro on an SSD drive on a 8 core 3Ghz Mac pro.
Tried initially placing this drive on one of the two xtra SATA ports and mounting it where the extra CD drive goes, then discovered that Windows won't recognize and would need drivers/hacking etc.
Have decided to put it in regular bay 4 and use bootcamp. Do I need to install any special drivers to maximize the ability of Windows to access this drive?
Model Name:Mac Pro
Model Identifier:MacPro2,1
Processor Name:Quad-Core Intel Xeon
Processor Speed:3 GHz
Number Of Processors:2
Total Number Of Cores:8
L2 Cache (per processor):8 MB
Memory:8 GB
Bus Speed:1.33 GHz
Boot ROM Version:MP21.007F.B06
SMC Version (system):1.15f3
I did a clean install of snow leopard and i wanted to install Windows 7 via boot camp but when I go to bootcamp utility i get a message
"You must update your computer's Boot ROM firmware before using this setup assistant."
Not sure what I need to update? I have a 2009 Mac Pro running SL.
One of the hdd's in my macpro runs constantly. The computer is constantly reading and writing to the hd. Not sure which one. CHecked processes and it shows that it is in fact doing so, even with no open applications. Not sure where to look or how to fix it. SLowing down my computer as well.
View 7 Replies View RelatedFirst My Home Network:
Airport Extreme N, current model, separate discrete g and n networks. G network is set up in WDS mode to extend Airport Express which is connected to a MP via Ethernet. My other Macs are 100% wireless.
The problem:
The network name of my MP is randomly changed. The original name was simply "MacPro." Then it started to change it's name to MacPro (1), MacPro (2), etc., thinking there was already a computer with the same name in use when it was the same computer all along.
The message I get looks like this:
I only have this problem on my MP, which again, is connected to an Airport Express via Ethernet. This problem doesn't exist on my machines that have an Airport card installed.
Anyone know what is causing this, and more importantly, how to stop it?
