I have a 4GB Kingston usb stick and I have it formatted to MS-DOS (FAT32) so I can swap files between my Mac at home and PC at work. All works fine except when I put the files onto it from my Mac it takes soooo much longer than to do the same from my PC (similar specs with regard to CPU and Memory, if that makes a difference?). Why is it so slow copying files to it from my mac than from my PC? Is it because of the formating of the stick
I want to import photos from my Sony memory stick pro duo to iMac. My imac has SD card reader but not sure whether it reads photos from memory stick pro..
i bought this iMac in May 2011. I believe this model doesn't support Memory stick pro.
I have an iMac and MBP. When I transfer files over the network (wireless) from one computer to the other, it is quite slow. I think around 1~1.5mb/sec. Is this normal or expected performance on file transfer via wireless? If so what can I do to increase the performance? Settings on the wireless router?
This ended up being pretty long but I tried to include as many details as possible. If any more information is needed please just let me know in this thread. I have been trying to figure this out all day and it has been driving me nuts. First of all I have a Macbook with a 2.4GHz Intel Core 2 Duo processor, 4 GB of RAM and am running Mac OS X Version 10.5.6. Also this is the last generation of the "white" macbook that came out in February I believe of last year.
My external HD is a 1TB Rock Mobile Disk. For some reason when I try to transfer files to or from the external HD to my Mac I am getting nowhere near the expected 480MB/s. I do use a Swiss Gear 4-port USB splitter. When I use the splitter I am getting a transfer rate of about 120MB/s and without it I am only getting about 300MB/s. This is of course if I am only trying to transfer one 800MB movie. If I attempt to transfer multiple seasons of television shows it will drop to as low as 40-50MB/s. Also, if I were to be transferring a single season of a TV show. The transfer speed is much faster to click and drag every episode from my HD to my Mac than it is to transfer the entire folder at once. The whole folder might take 25 minutes but one at a time it will only take about 5.
I purchased a FW800 enclosure for my Seagate 500GB 5400rpm HD. I just got a 2010 13" MBP. I was previously using a 2006 MBP with an ExpressCard slot, and had this hard drive connected over eSATA. According to TomsHardware the max sustained write speed of this drive is around 65MB/s, which is what I was getting over eSATA. So I got the FW800 enclosure now that I can't use eSATA with the thought that I'd be getting the same 65MB/s that this drive is capable of. FW800 should be able to handle up to 100MB/s. But I'm only getting around 40MB/s, closer to what I should be getting if I was using FW400.
I have a 24" intel imac from 2 years ago and it has USB2 ports on the back right, well if I plug in a flash drive and take files from the drive to the computers they transfer at USB2 speeds. But when I go the other day and copy from the mac to the USB drive it's slow as hell. Like USB1 or worse speeds. It's not like that on my PC at work which has similar specs to the IMac.
I have a 15" MacBook Pro from a couple of years ago (2.0 GHz) and I am about to upgrade my harddrive from 75 GB to 500 GB (and from 5400 to 7200 rpm). I think I am going to simply clone my harddrive, so I bought an enclosure for my new drive to use when transferring all my data. The enclosure I purchased works with usb 2.0 or eSATA.
My question is, should I take advantage of the eSATA speeds? Do you think it's worth it? For another 50 bucks I could by an expresscard and a cable that will allow me to do the transfer via eSATA. Should I bother or should I just stick with USB 2.0? I hear USB 3.0 is coming out early next year, so I was thinking I shouldn't bother with eSATA (though 50 bucks isn't much of an investment). But I'm not about to wait for USB 3.0 to come out. Do you think it would be worth spending the money to get the extra speed for this transfer? My 75 GB drive is almost full.
I have 3 macbookpros connected to a mini mac server via ethernet. I have the cables and hub to set up a firewire network. I'm wondering if having two networks will increase my connection speed?
I did some experimenting this evening to assess data transfer rates to various storage items in my home network which uses a new Time Capsule as the router/hub.
Connected to the Time Capsule are the following: - Mac Pro (GigE) - Vista Machine (GigE) - MBA (Wifi) - Raptor Drive (USB 2) - Time Capsule Drive (Internal)
Transferring a 650MB file between devices yielded the following results: MP > Vista (GigE) = 288 Mbps MP > MBA (5GHz) = 52 Mbps MP > MBA (2.4GHz) = 43 Mbps MP > Raptor (TC USB) = 38 Mbps MP > TC Drive (Internal) = 38 Mbps MBA (5GHz) > TC Drive (Internal) = 22 Mbps
It seems that transferring files to a USB drive or the internal drive on the Time Capsule is painfully slow. It took 2:20 to transfer the 650MB file to the Time Capsule over GigE vs. 0:20 seconds to another machine. What's worse, is that the data transfer speeds to the TC are a function of link speed, the slower your connection, the slower your transfer rates. It's not simply limited by some bottle-neck in the TC. It took 3:45 to transfer the same file to the TC from the MacBook Air over the 5GHz WiFi connection. When I complained about this the other day at the Apple store, the "Genius" said that it's due to QOS built into the router to ensure it doesn't kill my web browsing.
So my question is simple. I have the base 13" mbp. So I have 2 x 1GB sticks. Can I get 1 x 4GB stick and make that total 5GB? Or do I have to purchase in pairs (2 x 4GB)?
Sorry for the title but I couldn't think of anything better. Hopefully I'll be able to explain my problem. I have a MPR 2.53 ghz, 4 gig ram, I'm using Safari 4.04. I am using the WIFI at a guesthouse in Thailand (but I had the same issue in China, Vietnam ...). I ran a speed test and it said download 7mb/sec and upload about 1mb/sec. I have an "app" that says bandwidth in 1.3kb/sec out 1.0kbs. I thought maybe it was Safari so I downloaded and installed Firefox. firefox gives me similar speeds. When I downloaded Firefox though I had a download speed of over 1mb/sec. But as soon as it finished downloading the speed went back to around 1kb/sec. I have rebooted my MBP many times. I did some Google searches but didn't find anything helpful.
I am interested in adding a webcam to my desktop Imac (power pc)- Isight is no longer available- an option that I found is the Ecamm Image- but apparently it is USB and not firewire and it will only run with high speed usb- how do I know which type is on my computer? I checked system profiler but quite frankly wasn't sure of the designations.. does anyone have any experience with this camera, by the way? is USB 2.0 by definition "High Speed"?
I have a WDS local network at my house. I use a Airport Extreme in my main part of the house and a Airport Express for my back part of the house i.e. the backyard. Now every two weeks or so my internet speed through my Airport Express slows down about half the speed but when I am connected trough the Airport Extreme my speed is normal. I know this because I test my connection very often. Now when I want the Airport Express to get back up to speed I have to unplug, and plug it back in. Then after awhile it starts to slow down again in a time period of two weeks or so.
I have a MPR 2.53 ghz, 4 gig ram, I'm using Safari 4.04. I am using the WIFI at a guesthouse in Thailand (but I had the same issue in China, Vietnam ...).
I ran a speed test and it said download 7mb/sec and upload about 1mb/sec. I have an "app" that says bandwidth in 1.3kb/sec out 1.0kbs. I thought maybe it was Safari so I downloaded and installed Firefox. firefox gives me similar speeds. When I downloaded Firefox though I had a download speed of over 1mb/sec. But as soon as it finished downloading the speed went back to around 1kb/sec. I have rebooted my MBP many times. I did some Google searches but didn't find anything helpful.
Have an Extreme base stations and express repeater connected to my DSL services. On my primary iMac connected via ethernet I get 5.25MBps speed. The speed on this computer is always constant. On the remote MacPro I get anywhere from 1.5MBps to 5MPps speed within a half hour of testing.
I'm using Data Rescue III on a USB powered hard drive with and it's taking a very long time with my iMac G5... It says 42,291 hours remaining (about 5 years) If I did it on my Mac Pro would it go faster, or is the recovery speed based on the hard drive speed?
i have a 1.5 Mbps AT&T DSL connection, and multiple speed tests show a download speed of 1.2 Mbps (and 200 Kbps upload). when i download files, such as software updates from Apple, various podcasts, and even Silverlight from Microshaft, the speed is always between 140 - 160 Kbps. i contacted AT&T, and the rep said it was because of buffering by the servers i was receiving the files from. is this a reasonable explanation? is this an accurate use of the term "buffering"?
Last night my fan kicked into high gear all of a sudden. I shut it down overnight and when booting up this AM I find it still running on high...quire noisy, of course. Is there something overheating? How to make it run at normal speed?
I generally get about 700kbs download speed, which is what my ISP (Sky uk) tells me I SHOULD have, but they also tell me that my router upload speed should be similar and it's not anywhere close to it.
I find OS X's TTS engine on SL to be not fast enough on full speed. Is there a way to hack the plist file or something to speed up the dictation past the max speed?
Does it hurt the computer... If the computer is doing something (watching flash, playing a game) that turns on the fan full speed;Does this hurt the computer? There are a few games I like to play and they turn on the fan at full speed (computer gets hot too, on the bottom.)
I've got a real odd problem with safari 4. For some reason it is cutting my download speeds in about 1/2 from my server and many other places.
If I restart safari I will be able to download close to my 18 Mbps for a little bit but then it will just start to slow down and after about 30 minutes it will be down to about 6 - 8 Mbps.
I have a 2011 Macbook Pro and an older (5 year old) Western Digital external hard drive. I have always used this hard drive for both mac and windows. Recently, however, whenever I go to transfer a file from the mac to the WD hard drive, the little transfer window pops up and it appears to initiate the transfer. However, it never fully starts it. It appears to "get stuck" in that initiating stage, showing zero of 3.16 gb transferred and shows an unknown transfer time. This happens no matter how long I leave it open. Again, I have used this external hard drive with my macs for the past 5 years without any problems until now. I haven't moved or modified the WD hard drive
