I set up my new airport extreme today, but I have a concern. Obviously it supports dual band, but how do you set that up? I don't think I'm transmitting in wireless n because my iPod touch works fine on the network. I only see one wireless network. Does this mean I'm not transmitting in wireless n, or am I?
View 6 Replies
I have the newest AirPort Extreme that transmits simultaneously in 2.4GHz and 5GHz. It's been great. My speeds have jumped 2-3x what they were before I upgraded to this router. Now, I'm getting 28-30MB per second download speeds. Before this I was getting 8-10MB per second.
But, I have a problem. My MBP connects great to the AirPort Extreme (802.11n at 2.4GHz or 5GHz). One PC desktop works great with the AirPort Extreme (via Ethernet). And, I have another PC laptop connecting at good speeds (802.11g). But, I have one other PC that sees and connects to the Airport Extreme signal (802.11g) but nothing happens. It's like a garden hose with very little to no water. The signal strength is very strong and, again, the computer DOES recognize the signal. It's an XP desktop (4 or 5 years old) with an 802.11g card inside.
Any thoughts as to why I have this problem with this one computer? It connected fine with my prior wireless router. It's a new problem.
By the way, the Airport Extreme is setup with all of the normal defaults and "automatic" settings, WPA2, etc. My cable provider is Comcast and the router gets it signal from a new modem. There are no other
I have been having a long term problem with my dual band airport extreme...
The good news - the 5 Ghz band works great - I get very consistent download speeds of around 12.5 Mbps on my MacBook Pro.
The bad news, its not the same story with the other band. The speed is somewhat inconsistent and generally very slow - usually around 1-2 Mbps on my Macbook pro (although I did do one speedtest that got 8Mbps - def the exception though). On my iPhone 3g and my new iPhone 4, I am yet to get a speed greater than 1Mbps (and its been as low as 220 Kbps) its always slower than the 1.5 Mbps I get over 3g!
Can anyone tell me what the problem might be and how I might go about troubleshooting/fixing it?
I'm having issues getting my new XBOX 360 Slim to connect to my dual-band Airport Extreme when using wireless n. I can get it to connect with n but my connection speed on the 360 drops to 1 or 2 mbps, even though the signal remains strong. I can see the speed drop of the 360 using Airport Utility on my laptop. All other devices on the network are fine. When I switch the 2.4 GHz band on the AE to b/g only, then the connection speed on the 360 shoots up to 54 mbps. That of course neuters the rest of my wireless n devices to g speed since most connect to the 2.4 GHz band due to the limited distance of the 5 GHz band.
Short of finding a solution, my next step is to try a different router brand. I'd rather stick with Apple, but have had more issues with 2 AE models than all of my other Apple hardware combined.
I have an Airport Extreme with Dual Band Networks, and an airport express 802.11n edition. I have setup the Base station to do N,A,G,and B Networks, but I only want the express to EXTEND the G Network. How can I make that happen?
View 6 Replies View RelatedI am looking to get a AirPort Extreme base station and use the dual radio modes. However, there are some peripherals like printers and game consoles that will not run on the 5 GHz band. Could anybody please tell me if the router allows sharing between both bands or just in each individual band?
View 3 Replies View RelatedAnyone have the new Airport Extreme? I have a question about the new features.
I'm interesting in picking one up because I've been looking for a good 802.11n router for awhile, and the simultaneous dual-band radios plus the guest networking feature are the real sellers for me. Both those features exist in part on other routers, but I'd have to put in a lot of work in a DD-WRT compatible router to get them both to work properly.
My question, though, is can both the dual-band radios and the guest networking feature be run simultaneously? It seems that from a hardware perspective, the easiest way to get a second network and SSID running would be to use the second radio, which precludes the dual-band feature. Does anyone have the new Airport Extreme yet? Can you run both at the same time?
I have a simultaneous dual-band AirPort Extreme base station running software version 7.5 and can't find the software install disk it came with. I reinstalled Snow Leopard onto my mini and it has AirPort Utility 5.4.2. When I try to connect to the AEBS, I get a pop-up stating that a newer version of AirPort Utility is needed, but I can't find anything newer than 5.4.2 on the Apple download site. Does anyone know if Apple has the AirPort Utility software that works with this hardware/software available somewhere?
View 1 Replies View RelatedI just bought a new Time Capsule and an Airport Extreme. Both are the newfangled dual-band type. At the moment the AEX is the main base station, connected to my DSL modem in the Living Room. The TC extends the AEX network and is in my office.
The instructions suggest the TC should not be a network client and rather be the main base station, and to make the AEX extend the network. How much difference will there be in Time Machine performance between the two topologies?
I would really prefer having the TC in my office, so I can attach via gigabit ethernet to the TC when I'm working there with my MBP. I cannot move the DSL modem to my office since I don't have a phone line there (it's really an upstairs bedroom).
I've been banging my head over this reading over and over multiple different threads but I can't come to any kind of a conclusion if I can do what I'm trying to do with the hardware I have. I realize when you have a g device connected to an N-network it drops the connection speed down. I was hoping I could get an express to extend the network then put the extreme in N-only and have my mbp connect to that, while the other devices (ps3 and iphone) could connect to the express in g mode. From what I've seen, everything is connecting to the express, including the mbp. Is there no way to force it to connect to the express in N mode? Is there no way I can simulate the functionality of "dual band" with just an extreme and an express?
View 5 Replies View RelatedMy current network in my apartment is as follows:
- cable modem
- one G airport express hooked to cable modem & a stereo
- another G airport express connected via WDS, attached to a stereo & printer
Except for the convenience of the 2 stereos for airtunes & the location of the printer, there's no need for the 2 airport express devices to be honest
While I have a bunch of G devices, I'm starting to accumulate some N devices, and for what I'm planning, I'd like to make use of the Extreme's gigabit ethernet ports in the location of my cable modem as well (which also happens to be where my TV is, going to set up some sort of media device). At the same time, I'd like to have the airtunes to both stereos and the printer connectivity without having to move either of the stereos or the printer.
I just wanted to verify that I could do what I was thinking here, the network would be structured as follows:
- cable modem
- extreme hooked to cable modem, broadcasting 2 SSIDs
- express hooked to the stereo, connected via WDS on 2.4ghz SSID
- express hooked to stereo & printer, connected via WDS on 2.4gz SSID
- any N device can connect to the 5ghz SSID but still interact (ssh, etc) with the stereos, printer, and machines on the 2.4ghz SSID
- any device on the 2.4ghz SSID can interact (ssh, etc) with the devices on the 5ghz SSID
Is this possible? And even if so, is there a better way to set things up to get what I want
So I see from the product description that the Mac Mini has "built in Airport Extreme wireless N WiFi", but I'm unsure of what that means. Does the Mac Mini have dual band wireless N WiFi, or does it only operate on the 2.4 GHZ band?
View 9 Replies View RelatedI recently upgraded to the airport extreme dual band II. I then moved my old extreme (N with gigabit) downstairs. It joins the network that the dual band is running to supply internet to my xbox, game PC, and ps3. The Dual band is running the newest firmware, 7.5.1 and the 5ghz network is very flaky. I have been forced to give the 5ghz a different name and use the 2.4ghz G band most the time. If I am on the 5ghz band my connection will just stop responding. Sometimes it work for an hour, sometimes for 5 minutes. Rejoining the network will make it ok again. Although last night I transferred 30gigs over the N network with no problem. It's not a distance issue since the problem is no better or worse whether I'm 2 or 25 feet away from the router. This is really driving me nuts right now. I just want to have one network setup and have the N devices use 5ghz and the G devices use 2.4 and not have to constantly worry about it.
View 2 Replies View RelatedMy son and I both have Mac Book Pros and a wireless network running at home. We have Snow Leopard, and Comcast 12mb cable internet. I currently am using a 2 year-old Linksys WRT160N router going through my own Motorola Surf Board SB6120 modem. It's been fine the last couple of months after the switch from AT&T, but every now and then, it seems to lose the IP addresses and connection, so I end up having to call Comcast to reset them from their end. I'm beginning to thing that perhaps it's time to get a new router. What is even stranger is that sometimes I still have service and my son, 20 feet away in his room, loses it or vice-versa. What are your esteemed opinions on this? Do you think it's the router or some setting? If it is the router, what do you all recommend in the way of a dual-band, perhaps dual radio, wireless N-router?
View 24 Replies View RelatedI have an OLD Ti Book. (667 MHz, G4; 1 GB RAM, running 10.4.11). Just bought a SISCO Linksys wireless-n router (dual band), high performance. It is set up properly, as my iphone is connecting and my work PC laptop connects too. I am assuming that my old, but kick ass powerbook does not have an airport card built in? So, I assume I need an adapter? We bought the adapter that went with the router, but after I got it home, realized it is only for windows. Did I miss the MAC one, or can I use this one.
View 2 Replies View RelatedApple on Tuesday refreshed its AirPort Extreme and Time Capsule wireless products by adding a new Guest Network feature and support for simultaneous 2.4 GHz and 5 GHz dual-band networking. Time Capsule drives are now also accessible over the Internet for MobileMe subscribers.
The new Guest Network feature, available on the new AirPort Extreme and Time Capsule, allows you to set up a secondary network for friends and visitors with Internet-only access so you don't have to hand out your WiFi password.
Meanwhile, the new combined 2.4 GHz and 5 GHz mode allows your AirPort base stations to simultaneously support iPhones and other 802.11b/g devices operating at 2.4 GHz, while also broadcasting 802.11n wide signals in the 5GHz band to maximize throughput for notebooks and devices such as Apple TV.
Previous-generation AirPort Extreme and Time Capsule models can only run in one mode or the other, providing either wide compatibility or the highest possible network performance, but not both.
Also new to Time Capsule -- and oddly omitted from any of Apple's press-releases -- is that MobileMe subscribers using Mac OS X 10.5.x Leopard can now now access all of their files on their Time Capsule drive over the Internet.
You need only to register their Time Capsule with your MobileMe account. The Time Capsule drive will then appear in the Finder sidebar of your Mac just like any other attached drive.
"It's like having your own personal file server wherever you go," Apple says.
The new Time Capsule, which combines an 802.11n router and server-grade hard disk for automatic wireless back-up with Time Machine, and is immediately available in two models: a 500GB model for $299 and a 1TB model for $499.
I have one of those "new" (well, mine's over a year old now) 13" aluminum-cased MacBooks (what is the official name for these anyways, Intel Core-Duo or something?... I digress). I am using the default/included 'AirPort' wireless thingy.
All I want to know is: How do I ensure that my AirPort is configured properly to access a 5 ghz wireless band? I just setup my wireless router to broadcast at 5 ghz and I want to make sure my MacBook is receiving at 5 ghz/optimal speed. So, what steps do I take to check this and/or configure it as such?
I have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
View 5 Replies View RelatedSo the new Airport Extreme has two radios and allows one to use 2.4 ghz and 5 ghz simultaneously with 802.11 a/b/g/n in various configurations on either band. My question is this, can you use different types of encryption for each band/radio or are you forced to use one for all? What I'd like to do is have 2.4 ghz running 802.11 b/g for an older iBook and my iPhone using WEP encryption. Then have 5 ghz running 802.11n using WPA2 encryption. Both will use MAC address filtering to also tighten security a little. Lastly, can the guest login also use it's own type of encryption (or lack thereof) independent of the above?
View 3 Replies View RelatedI don't understand something very basic about the internet...
I have been using a 2WIRE wireless box plugged into my phone line/DSL for four years. I knocked it over and it doesn't seem like it is broadcasting a wireless signal anymore, so I bought an Airport Extreme Base Station, 2007 square model used.
I don't understand how to set it up... Can't I just throw away the 2WIRE thing now? When I try to use the Airport Extreme thing, it does not recognize the internet DSL signal or something.
I just want to use the Airport Extreme as a dsl wireless router alone.
I don't want the 2WIRE thing. The 2WIRE thing is usable when I plug my ethernet cord into it, but it is no longer broadcasing a wireless signal.
How do I set up the Airport Extreme with my DSL for wireless?
Sorry this is so stupid. I just don't understand what to do at all.
I just got an AirPort Extreme Card from Apple that has been refurbished. I installed it in my G5 and then on power-on, the system hangs before the chime even sounds? I remove it and everything is back to normal...
Information:
Power Mac G5 Dual 2GHz
Mac OS X (10.5.1)
MacBook 2.16, PowerMac G3 B&W, PowerMac 8100 AV, PowerBook 540c, Mac Plus
We've just moved house and signed-up to O2 Broadband. They've supplied a Thomson wireless box that plugs into the phone socket. This box, however, doesn't work with my Apple TV or Airport Extreme/Airport Disk. I've tried to make my Extreme 'extend the network' but it says the network cannot be extended.
How can I ditch this O2 wireless box and get back to my Apple-based network (considering the broadband enters my house through a phone socket rather than a Cat-5 ethernet cable that the Extreme can accept)? I want my AppleTV/Airport disk back as I had in my old house!!
AirPort Extreme 802.11n Wi-Fi wireless networking;2 IEEE 802.11a/b/g compatible
Bluetooth 2.1 + EDR (Enhanced Data Rate) wireless technology
My powerBook has no problem connecting, but the Airport Admin utility for Windows XP can't "see" the base station.
Clicking "Start" then "connect to" and then "show all connections" and then the name for my Airport network, a "choose a wireless network" screen comes up, a strength meter (all bars on) displays, and a reminder that a network key is required. Clicking "connect" on this screen shows a "wireless network connection" thingy -- but it never actually connects.
Have a Belkin Wireless G Notebook Network Card in a Toshiba 2430:(URL)
I no longer have any wireless devices in my house and I'd prefer not to have wireless active. When I go to the AEBS admin utility, the best I can see to do is reduce the signal strength to 10%. Is there a way to shut of wireless altogehter?
View 12 Replies View RelatedI can't get my Airport Extreme to work w/ any of my PCs (via wireless). I have an Extreme N w/ gigabit and using WPA/WPA2 security. Latest firmware. My MBP works perfectly fine, so does my iPod Touch and even my printer which connects via WiFi also (hp Photosmart D7460).
However none of my PCs can connect, I already tried w/ 2 different Dell laptops a Toshiba laptop and a desktop. All are running XP and have all the updates etc. All connect and work fine to my Linksys WRT54G.
I am sorry, whats the difference?
View 1 Replies View RelatedFirst post so bear with me. I use a 1Tb Time Capsule as my wireless router. On the other side of the room I have (wirelessly connected) my PS3, TV, Wii, and a Helios network media server. These are not all wireless N devices.
I also have a previous generation Airport Extreme.
Question. Can I wirelessly connect my Time Capsule to the Airport Extreme (on the same side of the room as the PS3, etc.) and then connect PS3, etc. to the Airport Extreme via the ethernet connections ?
If this is possible would I (as I hope) get better network throughput as the only wireless connection would be at N speeds ?
Quick question does anyone know how to set the Airport Extreme to wireless N only? I understand it will be wireless N only if I connect to the 5 ghz band. Problem is my Netgear Wireless N Bridge is 2.4 ghz only, and when it connects to the Airport extreme for some reason it only connects at wireless G. I do not see an option in Airport Utility for it to broadcast in Wireless N only. My options are 1) Automatic 2) 802.11a/n-802.11b/g 3) 802.11a-802.11b/g
View 24 Replies View RelatedQuick question, if I were to get a usb hub to use with an airport extreme would I be able to use both an external hard drive for backup and a printer for wireless printing or will it only let me use one? Also, would I be able to do this with an airport express? From what I see it seems like the express doesn't support hard drives.
View 4 Replies View Related
