I am looking to get a AirPort Extreme base station and use the dual radio modes. However, there are some peripherals like printers and game consoles that will not run on the 5 GHz band. Could anybody please tell me if the router allows sharing between both bands or just in each individual band?
View 3 RepliesI set up my new airport extreme today, but I have a concern. Obviously it supports dual band, but how do you set that up? I don't think I'm transmitting in wireless n because my iPod touch works fine on the network. I only see one wireless network. Does this mean I'm not transmitting in wireless n, or am I?
View 6 Replies View RelatedI have the newest AirPort Extreme that transmits simultaneously in 2.4GHz and 5GHz. It's been great. My speeds have jumped 2-3x what they were before I upgraded to this router. Now, I'm getting 28-30MB per second download speeds. Before this I was getting 8-10MB per second.
But, I have a problem. My MBP connects great to the AirPort Extreme (802.11n at 2.4GHz or 5GHz). One PC desktop works great with the AirPort Extreme (via Ethernet). And, I have another PC laptop connecting at good speeds (802.11g). But, I have one other PC that sees and connects to the Airport Extreme signal (802.11g) but nothing happens. It's like a garden hose with very little to no water. The signal strength is very strong and, again, the computer DOES recognize the signal. It's an XP desktop (4 or 5 years old) with an 802.11g card inside.
Any thoughts as to why I have this problem with this one computer? It connected fine with my prior wireless router. It's a new problem.
By the way, the Airport Extreme is setup with all of the normal defaults and "automatic" settings, WPA2, etc. My cable provider is Comcast and the router gets it signal from a new modem. There are no other
I have been having a long term problem with my dual band airport extreme...
The good news - the 5 Ghz band works great - I get very consistent download speeds of around 12.5 Mbps on my MacBook Pro.
The bad news, its not the same story with the other band. The speed is somewhat inconsistent and generally very slow - usually around 1-2 Mbps on my Macbook pro (although I did do one speedtest that got 8Mbps - def the exception though). On my iPhone 3g and my new iPhone 4, I am yet to get a speed greater than 1Mbps (and its been as low as 220 Kbps) its always slower than the 1.5 Mbps I get over 3g!
Can anyone tell me what the problem might be and how I might go about troubleshooting/fixing it?
I'm having issues getting my new XBOX 360 Slim to connect to my dual-band Airport Extreme when using wireless n. I can get it to connect with n but my connection speed on the 360 drops to 1 or 2 mbps, even though the signal remains strong. I can see the speed drop of the 360 using Airport Utility on my laptop. All other devices on the network are fine. When I switch the 2.4 GHz band on the AE to b/g only, then the connection speed on the 360 shoots up to 54 mbps. That of course neuters the rest of my wireless n devices to g speed since most connect to the 2.4 GHz band due to the limited distance of the 5 GHz band.
Short of finding a solution, my next step is to try a different router brand. I'd rather stick with Apple, but have had more issues with 2 AE models than all of my other Apple hardware combined.
I have an Airport Extreme with Dual Band Networks, and an airport express 802.11n edition. I have setup the Base station to do N,A,G,and B Networks, but I only want the express to EXTEND the G Network. How can I make that happen?
View 6 Replies View RelatedAnyone have the new Airport Extreme? I have a question about the new features.
I'm interesting in picking one up because I've been looking for a good 802.11n router for awhile, and the simultaneous dual-band radios plus the guest networking feature are the real sellers for me. Both those features exist in part on other routers, but I'd have to put in a lot of work in a DD-WRT compatible router to get them both to work properly.
My question, though, is can both the dual-band radios and the guest networking feature be run simultaneously? It seems that from a hardware perspective, the easiest way to get a second network and SSID running would be to use the second radio, which precludes the dual-band feature. Does anyone have the new Airport Extreme yet? Can you run both at the same time?
I have a simultaneous dual-band AirPort Extreme base station running software version 7.5 and can't find the software install disk it came with. I reinstalled Snow Leopard onto my mini and it has AirPort Utility 5.4.2. When I try to connect to the AEBS, I get a pop-up stating that a newer version of AirPort Utility is needed, but I can't find anything newer than 5.4.2 on the Apple download site. Does anyone know if Apple has the AirPort Utility software that works with this hardware/software available somewhere?
View 1 Replies View RelatedI just bought a new Time Capsule and an Airport Extreme. Both are the newfangled dual-band type. At the moment the AEX is the main base station, connected to my DSL modem in the Living Room. The TC extends the AEX network and is in my office.
The instructions suggest the TC should not be a network client and rather be the main base station, and to make the AEX extend the network. How much difference will there be in Time Machine performance between the two topologies?
I would really prefer having the TC in my office, so I can attach via gigabit ethernet to the TC when I'm working there with my MBP. I cannot move the DSL modem to my office since I don't have a phone line there (it's really an upstairs bedroom).
The Airport Extreme is supposed to operate simultaneous 2.4GHz and 5GHz bands. I take that to mean they can both be run at the same time. If so, how do I set them up to operate simultaneously?
View 5 Replies View RelatedI decided I need a dual band router to improve connection among all the wireless devices in my house. Any recommendations other than the AEBS?
View 2 Replies View RelatedI've tried searching, but can anyone point me in the directions of how to set up and Airport Extreme (old) and an DI-524 (D-link) b/g router. I obviously am looking to turn my old AEBS into dual band. The two routers will be connected via Ethernet cable.
View 1 Replies View RelatedMy son and I both have Mac Book Pros and a wireless network running at home. We have Snow Leopard, and Comcast 12mb cable internet. I currently am using a 2 year-old Linksys WRT160N router going through my own Motorola Surf Board SB6120 modem. It's been fine the last couple of months after the switch from AT&T, but every now and then, it seems to lose the IP addresses and connection, so I end up having to call Comcast to reset them from their end. I'm beginning to thing that perhaps it's time to get a new router. What is even stranger is that sometimes I still have service and my son, 20 feet away in his room, loses it or vice-versa. What are your esteemed opinions on this? Do you think it's the router or some setting? If it is the router, what do you all recommend in the way of a dual-band, perhaps dual radio, wireless N-router?
View 24 Replies View RelatedI have an OLD Ti Book. (667 MHz, G4; 1 GB RAM, running 10.4.11). Just bought a SISCO Linksys wireless-n router (dual band), high performance. It is set up properly, as my iphone is connecting and my work PC laptop connects too. I am assuming that my old, but kick ass powerbook does not have an airport card built in? So, I assume I need an adapter? We bought the adapter that went with the router, but after I got it home, realized it is only for windows. Did I miss the MAC one, or can I use this one.
View 2 Replies View RelatedI've been banging my head over this reading over and over multiple different threads but I can't come to any kind of a conclusion if I can do what I'm trying to do with the hardware I have. I realize when you have a g device connected to an N-network it drops the connection speed down. I was hoping I could get an express to extend the network then put the extreme in N-only and have my mbp connect to that, while the other devices (ps3 and iphone) could connect to the express in g mode. From what I've seen, everything is connecting to the express, including the mbp. Is there no way to force it to connect to the express in N mode? Is there no way I can simulate the functionality of "dual band" with just an extreme and an express?
View 5 Replies View RelatedSo I'm trying to connect my MBP to my new Belkin Double N+ (F6D6230uk4) router. I have 2.4 ghz set to b/g and 5 ghz set to n and 20/40hz bandwidth. Last night, when I connected to the router for the first time, I was showing 300mbps, when you Options+click the Airport icon. However, now I'm only showing 145mbps. To be fair, I may have changed a few settings between now and then, but I have no idea how I was able to get 300mbps before. It's as though it's only connecting to one channel, instead of two, which is required for 300mpbs I think?
View 2 Replies View RelatedMy current network in my apartment is as follows:
- cable modem
- one G airport express hooked to cable modem & a stereo
- another G airport express connected via WDS, attached to a stereo & printer
Except for the convenience of the 2 stereos for airtunes & the location of the printer, there's no need for the 2 airport express devices to be honest
While I have a bunch of G devices, I'm starting to accumulate some N devices, and for what I'm planning, I'd like to make use of the Extreme's gigabit ethernet ports in the location of my cable modem as well (which also happens to be where my TV is, going to set up some sort of media device). At the same time, I'd like to have the airtunes to both stereos and the printer connectivity without having to move either of the stereos or the printer.
I just wanted to verify that I could do what I was thinking here, the network would be structured as follows:
- cable modem
- extreme hooked to cable modem, broadcasting 2 SSIDs
- express hooked to the stereo, connected via WDS on 2.4ghz SSID
- express hooked to stereo & printer, connected via WDS on 2.4gz SSID
- any N device can connect to the 5ghz SSID but still interact (ssh, etc) with the stereos, printer, and machines on the 2.4ghz SSID
- any device on the 2.4ghz SSID can interact (ssh, etc) with the devices on the 5ghz SSID
Is this possible? And even if so, is there a better way to set things up to get what I want
I installed a WRT400N router via my PC several months back and used an adapter to utilize the Dual Band, Wireless N network. The product worked very well on my PC.
I recently bought a 27" iMac. It easily connected to the 2.4 Ghz Wireless N network. Performance and reliability are both good. However, I cannot see the 5Ghz network listed as an available network. Video streaming is not as good without the 5Ghz network.
Supposedly the 27" iMac (with built in wireless N) can achieve the Dual Band connectivity with Airport Extreme...but I do not want to spend money to replace a perfectly good router.
I recently upgraded to the airport extreme dual band II. I then moved my old extreme (N with gigabit) downstairs. It joins the network that the dual band is running to supply internet to my xbox, game PC, and ps3. The Dual band is running the newest firmware, 7.5.1 and the 5ghz network is very flaky. I have been forced to give the 5ghz a different name and use the 2.4ghz G band most the time. If I am on the 5ghz band my connection will just stop responding. Sometimes it work for an hour, sometimes for 5 minutes. Rejoining the network will make it ok again. Although last night I transferred 30gigs over the N network with no problem. It's not a distance issue since the problem is no better or worse whether I'm 2 or 25 feet away from the router. This is really driving me nuts right now. I just want to have one network setup and have the N devices use 5ghz and the G devices use 2.4 and not have to constantly worry about it.
View 2 Replies View RelatedApple on Tuesday refreshed its AirPort Extreme and Time Capsule wireless products by adding a new Guest Network feature and support for simultaneous 2.4 GHz and 5 GHz dual-band networking. Time Capsule drives are now also accessible over the Internet for MobileMe subscribers.
The new Guest Network feature, available on the new AirPort Extreme and Time Capsule, allows you to set up a secondary network for friends and visitors with Internet-only access so you don't have to hand out your WiFi password.
Meanwhile, the new combined 2.4 GHz and 5 GHz mode allows your AirPort base stations to simultaneously support iPhones and other 802.11b/g devices operating at 2.4 GHz, while also broadcasting 802.11n wide signals in the 5GHz band to maximize throughput for notebooks and devices such as Apple TV.
Previous-generation AirPort Extreme and Time Capsule models can only run in one mode or the other, providing either wide compatibility or the highest possible network performance, but not both.
Also new to Time Capsule -- and oddly omitted from any of Apple's press-releases -- is that MobileMe subscribers using Mac OS X 10.5.x Leopard can now now access all of their files on their Time Capsule drive over the Internet.
You need only to register their Time Capsule with your MobileMe account. The Time Capsule drive will then appear in the Finder sidebar of your Mac just like any other attached drive.
"It's like having your own personal file server wherever you go," Apple says.
The new Time Capsule, which combines an 802.11n router and server-grade hard disk for automatic wireless back-up with Time Machine, and is immediately available in two models: a 500GB model for $299 and a 1TB model for $499.
Just how do I connect a G4 to an Airport Extreme Base station via LAN cable, and then get it to connect to an existing wireless network (that's using a non Mac router). It's just that the existing airport card is painfully slow with a NAS and as I had the AE kicking about I thought I'd use that rather than buying a new PCI AE card.
View 5 Replies View RelatedI have an old Belkin pre-N router and Virgin internet.
I am considering getting a new router and was wondering what people think about the airport extreme versus others, specifically the Netgear N300 dual band routers, such as the WNDR3700? Both are about the same price.
I have 3 Macbook Pros and an old Windows xp computer and my mac pro currently on our home network, with my mac pro on the ethernet cable and the rest on wireless.
Is the range on the airport extreme good for outdoors as well as going through walls to upstairs?
I am sorry, whats the difference?
View 1 Replies View RelatedOK I know this can be done and have searched many forums and I cannot find the whole walk through on the process!!!
I have the Airport Extreme one version back without the dual antennas and I'm trying to make up for that with my old linksys router. I want my airport extreme to transmit wireless N only! and my linksys to transmit wireless G only!! configuration setting to make this happen??
What is Airport Extreme? Can I use it in conjunction with my existing modem / router and share it with my internet connection?
View 10 Replies View RelatedHow do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would like to access them.
Info:
MacBook, Mac OS X (10.7.4)
Just bought an Airport Extreme from Apple. Is there anyway I can use it instead of my existing netopia router.
I'm getting mixed reports on whether I can do it. The AEBS appears to be able to take a dsl line.
Does anyone out there is able to guide me thru the step on setting up a 2Wire all-in-one router with the AirPort Extreme base station? I was reading from somewhere, they were saying like i need to bridge the 2 router together or something.
View 2 Replies View RelatedJust bought an Airport Extreme from Apple. Is there anyway I can use it instead of my existing netopia router.
I'm getting mixed reports on whether I can do it. The AEBS appears to be able to take a dsl line.
i've just got my sister a emac G4 1ghz i installed the airport extreme card from my G5 cos she wants it in her bedroom but it's not connecting to the router, my router is a Thomson TG585 V7 i never had this problem with old airport, it only seems to be with extreme although the card was connecting to the network from my g5 was basically inches away from it, the Emac is on the floor about 2ft away i goto connect and it just keeps timing out, i've made sure the wpa key is correct and even tried manually entering the network config details but to no avail, is there any hope?
View 2 Replies View Related