Hardware :: AirPort Express Flashing Amber And Disappear
Mar 20, 2010
I have an AirPort Express which I use for AirTunes and to extend the wireless network of my Time Capsule. The Time Capsule is connected to my BT Home Hub (Modem/Router) via Bridge Mode, therefore, I run two networks in my home. The BT runs wireless G, and the TC, wireless N. Last week, my BT home hub was automatically restarting and cutting off the connection, this in-turn would cause the amber light to start flashing on the TC and AE. However, once the problem was fixed, the TC went back to green, but the AE still flashed amber. So today, I decided to move the AE to the same room as the TC and try to manually reset it using the push-pin hole on the bottom. That worked, but it only showed up in AirPort Utility for about 5 seconds before flashing amber and disappearing. I've tried re-setting it about 4 times, still with no avail.
my airport express is in the other room so i can play my xbox360 online. but recently my express is flashing amber? and when i go to the airport utility i cant see my airport express.. so i just want to know how to get my airport express to get internet to it so i can plug and ethernet cord from my xbox360 to my airport express?
My Airport Extreme that I just purchased last week has been solid green since I installed it but just today it started flashing the amber color. I am still able to connect to the internet and my PC still recognizes the Airport Extreme in my Airport Utility. Is this just because it probably wants me to install the latest firmware? I currently have 7.4 installed, not 7.4.1. I heard that 7.4.1 isn't any good so I would like to leave it at 7.4 for now. Is that the reason why it is flashing amber? Should I install the latest firmware or just leave it alone? I just don't like it flashing amber when it should be solid green...As of right now, I can still connect to the internet without a problem.
I have just started a 2 week vacation. Airport express is connect in hotel room to an Ethernet cable. It is flashing amber but my iPad can connect ok but my Dell laptop can't see the wireless network or the airport express base station in the ae utility program?
I connect the Dell to the airport express via the Ethernet and forced a reset to factory settings but still flashes amber?
I just came home from a 4 day vacation and noticed that my wifi was down. Upon inspection i found that the light on my Airport Express is flashing green rapidly (3-4 flashes/second - much faster than the flashing when starting up).
I cannot find the Airport with Airport Utility and I have tried both a hard reset and a factory reset with no luck - it just keeps flashing.
I have an old airport express that i want to configure but it cannot be found on airport utility. The AX (airport express) itself flashing green light constantly after reset.
My macbook pro 13" 2011 was working fine all day. I left it for a bit and opened it up at the end of the day and it shut down as soon as the display booted up. I figured it just needed to charge and left it plugged in over night, but there was no change in the morning. MagSafe is blinking green/amber when plugged in. There is no respsonse from pressing and holding the power button, and the charging display lights on the side aren't lighting up either. I tried the SMC reset with no results. Other threads have suggested unplugging and reconnecting the battery connector inside the shell, but I can't find this connector in my model. I think it might be under the battery?
I was trying to set up my airport extreme with my internet when I couldn't get anywhere because of the blinking yellow light. I have a 2wire at&t router that i connected with to the airport extreme via ethernet(the port in the back has a green light btw). I tried scanning for the airport extreme with airport utility but it couldn't find anything.
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info: MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
I recently moved into a new apartment that has an Airport Express connected to a cable modem. The network does not have a password. I want to put a password on it so that not everyone in the building can use our internet.
When I connect to the Airport via the Airport Utility, it recognizes the Airport, but asks for a password when I try to configure it. I tried doing a soft reset on the Airport, but it didn't change anything. Are there two passwords for an Airport? If so, how can I bypass the second one? The "Resetting Airport Express" page at [URL] doesn't answer this question. Do I need to do a hard reset? If so, is there anything I need to know about that? We no longer have any of the original literature that came with the product.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
I've realized that sometimes I "lose" my wireless signal. I am not using an AirPort router (I'm using Linksys, if that's at all helpful). I've noticed that suddenly all of the wireless signals disappear from the AirPort menu up on the menu bar, except the network that I am connected to (i.e., I only see my router's name there). It also becomes impossible for me to browse the internet, so what I've done to troubleshoot this is disable the AirPort, put the computer to sleep, and disconnect/reconnect my router. When I turn it on, it seems to work. I've also tried simply disabling and then re-enabling AirPort, but it doesn't work after that.
My router is giving me troubles all of a sudden. It's been flashing the yellow/amber light and I cannot connect to the internet anymore through it.
I've unplugged it and used a different ethernet cable through it, but it still won't connect.
However, my internet does work when I directly plug the ethernet cable into the back of my Mac. So it's not my ISP, which makes me think it's the router.
My AEBS is no more than 6-8 months old, and this is the first time I can't seem to fix it. Usually unpluging it and turning it off and back on will work.
I have an Airport Express and when I go to configure it it does not appear on the list of available networks. I have the AC plugged in and ethernet cable from my router attached to it. I get nothing! The light on the AE is green but my iBook G4 can't see it. From what I've read this looks to be a fairly simple plug and play operation.
I have an Airport Extreme Base Station and a Airport Express sitting in boxes, never being used. Our house is already equipped with wireless connection through our DSL and Linksys router. (was in place when I moved in)
I was thinking of getting a time capsule for back up, but not sure if I could get it up and running with the Linksys or not.
Can I use my Express as an extender for using my laptop in the backyard? will it talk nicely with the Linksys?
What are your suggestions/opinions? I hate to see my beautiful Apple products sitting in boxes.
I'm looking for a repeater of sorts, similar to the Airport express, but just not as expensive.
The issue is that my macbook drops out randomly, sometimes it just goes through phases where it drops the connection about 20 times in 30 minutes.
The issue is that the modem-router cannot be moved as its phone line based, so I think my last option is a repeater. The Express seemed ideal as its a small, simple unit that can be plugged straight into the socket, which would be perfect for where I wish to place it - is there a cheaper alternative?
Just tried to set up my Airport Express but it shows a flashing yellow light (meaning it isn't connected to my router) and it isn't even recognised by Airport Utility!
I have a Airport Express 802.11n (AE) early 2008 S/N 6F8437ZJZP8 working since 2 years, I use it to connect to printers an run it on wifi. Recently stopped working the green light was steady yellow. I search the forum did a soft reset, hard reset, factory default reset, etc and Is not working. Now all it does is when is connected to the outlet stays on yellow for few minutes and then shut off by it self. I even tried to connect by ethernet cable but when I run it my mac says nothing is connected to the cable and is a new one. When I tried to connect my mac can't find the devise true the airport utility. I have a mac laptop G4 12" Mac OS X 10.4.11 The airport utility is version 5.4.2 and both are up to date when I run the update application.
This is driving me crazy. I bought a Belkin F5D9050 802.11g compatible usb wireless card, and it will not recognize my airport express!
I have changed the settings in windows, and know the drivers are correct, it just won't find it as a online router/hub.
It says the network is unavailable, and there was an issue setting up wireless, it is like the windows wireless setup and the card are competing, so I cancelled the windows g setup and still nothing.
I am running SP 3 for XP, and tried chatting Belkin support and no one knows.
I installed Airport Utility, and etc and still doesn't connect.
The only flicker I had was when I went into my mac and tried creating another network, and then it signaled a device, but would not connect.
I have two airport express base stations. One upstairs connected to my dsl router and I can see the status of that one in the airport utility. I plugged the printer and speakers into another downstairs and plugged it in the wall but now I have a blinking orange light. I have no idea what my next step is. I have an iMac and two MacBooks that all share the connection.
